Canon I Sensys Lbp6030b User Guide

Turn  OFF  the  machine, wait  for  at least  10 seconds,  and  turn  it back ON.
LINKS
Setting a Wait Time for Connecting to a Network
>ä>Ý>Ì>Û>Ì>Þ>Ý>å
 

0HWJ-02C
Setting a Wait Time for Connecting to a Network
When  a network is  designed with multiple switching hubs  or bridges in order to  provide redundant  connectivity,  it must have a
mechanism to  prevent  packets  from looping.  One  effective solution  is  to  define the  role of each switch  port. However, communication
may  still be disrupted  for  a certain time  immediately  after you change the  network, for  example  by adding a new device. If  this type of
problem occurs, set a wait  time...

LINKS
Changing the Maximum Transmission  Unit
>ä>ß>Ì>Û>Ì>Þ>Ý>å
 

0HWJ-02E
Configuring DNS
DNS (Domain  Name System) provides a service for  name resolution that  associates  a host  (or domain)  name with an  IP  address.
Configure the  DNS, mDNS,  or DHCP option settings as necessary  according to  your network. Note that  the  procedures for  configuring
DNS are  different  for  IPv4  and  IPv6.
Start  the Remote UI  and  log  on in System Manager Mode.  Starting the Remote UI
Click [Settings/Registration].
Click [Network Settings]  [TCP/IP  Settings].
Configure the...

[DNS  Settings][Primary DNS  Server Address]
Enter the  IP  address of the  DNS server.
[Secondary DNS  Server Address]
When  there is  a secondary DNS server, enter its IP  address.
[Host Name]
Enter up  to  47 alphanumeric  characters  for  the  host  name of the  machine that  is  to  be registered with the  DNS server.
[Domain Name]
Enter up  to  47 alphanumeric  characters  for  the  name of the  domain  the  machine belongs to  (such as "example.com").
[DNS  Dynamic  Update]
Select the...

2Configure the IPv6  DNS  settings.The [Use IPv6]  check  box must be selected to  configure the  settings.  
Setting IPv6  Addresses
[DNS  Settings]
[Primary DNS  Server Address]
Enter the  IP  address of the  DNS server. Addresses that  start with "ff"  (multicast addresses)  and  the  loopback address
(::1) cannot  be entered.
[Secondary DNS  Server Address]
When  there is  a secondary DNS server, enter its IP  address. Addresses that  start with "ff"  (multicast addresses)  and
the...

Setting IPv4  Address
Setting IPv6  Addresses
Viewing Network Settings
>ä>ã>Ì>Û>Ì>Þ>Ý>å
 

0HWJ-02F
Configuring WINS
Windows  Internet  Name Service (WINS) is  a name resolution service that  associates  a NetBIOS  name (a computer  or printer name in a
NetBIOS  network) with an  IP  address. To use WINS, a WINS server  must be specified.
To register  this machine with a WINS server, a NetBIOS  name and  workgroup name must be set. Configuring  NetBIOS
This function is  not  available in an  IPv6  environment.
Start  the Remote UI  and  log  on in System Manager Mode.  Starting the Remote UI...

[WINS  Resolution]
Select the  check  box to  use WINS for  name resolution.  When  not  using WINS, clear the  check  box.
[WINS  Server Address]
Enter the  IP  address (IPv4)  of the  WINS server.
If  the  IP  address of the  WINS server  is  obtained from a DHCP server, the  obtained IP  address overrides the  IP  address entered  in
the  [WINS Server  Address] text box.
[Scope ID]
If  the  network is  divided into several groups with scope  IDs  (identifiers for  groups of devices in the  network),...

0HWJ-02H
Configuring NetBIOS
To register  this machine with a WINS server, a NetBIOS  name and  workgroup name must be set.
Start  the Remote UI  and  log  on in System Manager Mode.  Starting the Remote UI
Click [Settings/Registration].
Click [Network Settings]  [TCP/IP  Settings].
Click [Edit] in [NetBIOS Settings].
Enter  the required information.
[NetBIOS Name]
Enter up  to  15 alphanumeric  characters  for  the  NetBIOS  name of the  machine.
[Workgroup Name]
Enter up  to  15 alphanumeric...