Canon I Sensys Lbp6030b User Guide

[Job] menuAllows  you to  check  documents that  are  printing or waiting. You  can also  select documents and  cancel printing.
[Options] menuAllows  you to  execute  maintenance functions,  such as printing setting lists or cleaning  the  fixing unit, and  to  make machine
settings,  such as power saving  settings.  You  can also  check  information  such as the  total number of pages printed.
[Help]  menuDisplays  Help  about  the  Printer Status Window  and  version information.
You  can also...

Status barDisplays  the  connection destination  (port name)  of the  Printer Status Window.
>Þ>Þ>Ì>Û>Ì>Þ>Ý>å
 

0HWJ-00U
Turning the Power ON and OFF
Use  the  power switch  on  the  front side  of the  machine to  turn  the  power ON and  OFF. To restart the  machine, turn  the  machine OFF,
wait  for  at least  10 seconds,  and  turn  it back ON.
Turning the Power  ON
Turning the Power  OFF
When  you press the  power switch, the  
 (Power) indicator lights and  the  machine is  ready for  printing.
A blank sheet of paper  may  be output when you turn  ON the  power for  the  first time  after purchasing the...

0HWJ-00W
Saving Power
You  can save  power by setting up  the  machine to  automatically enter sleep mode or turn  itself  OFF  after it remains  idle for  a certain
length of time.
Setting Sleep  Mode
Setting Auto  Shutdown
>Þ>à>Ì>Û>Ì>Þ>Ý>å
 

0HWJ-00X
Setting Sleep Mode
The sleep mode function reduces the  amount of power consumed by the  machine by temporarily  stopping some  internal operations. You
can set up  the  machine to  enter sleep mode automatically when it remains  idle for  a certain length of time. The factory default  setting for
the  amount of time  that  elapses before the  machine enters  sleep mode is  1  minute.  We recommend  using the  factory default  setting to
save  the  most power. If  you want to  change the  amount...

0HWJ-00Y
Setting Auto Shutdown
You  can set up  the  machine to  automatically turn  itself OFF  after it remains  idle for  a certain length of time. This prevents wasted  power
consumption caused by forgetting to  turn  the  machine OFF. The factory default  setting for  the  amount of time  that  elapses befor e the
power is  turned OFF  is  4  hours. If  you want to  change this setting, perform  the  following  procedure in the  Printer Status Windo w.
If  you set the  time  until the  power is...

0HWJ-010
Loading Paper
This section  explains how to  load paper  into the  multi -purpose tray. See Paperfor  information  about  available paper  sizes.
Paper Type and  Printer Driver Paper Settings
Before printing,  refer  to  the  table below and  make the  appropriate paper  settings in the  printer driver, according to  the  type of paper
that  you have loaded. See Basic Print Operations for  detailed information  about  paper  settings,  and  see  Paperfor  information
about  the  number of sheets...

malfunction. It occurs when the  heat used to  fix toner on  the  paper  causes  moisture in the  paper  to  evaporate (most  likely to
occur  at low  room temperatures).
>Þ>ä>Ì>Û>Ì>Þ>Ý>å
 

0HWJ-011
Loading Paper in the Multi-Purpose Tray
Load  the  paper  to  print in the  multi -purpose tray.
Always  load paper  in portrait  orientation
Paper  cannot  be loaded  in landscape orientation. Be sure  to  load paper  in portrait orientation, as shown in the  illustration below.
Open the multi-purpose tray.
Spread  the paper  guides apart.
Slide the  paper  guides outward.
Load the paper  and  slide it  all the way  in, until it  touches the back side.
Load  the  paper  in portrait orientation...

When  loading  envelopes or preprinted paper,  see  Loading Envelopesor Loading Preprinted Paper .
Align  the paper  guides against the edges of the paper.
Align the  paper  guides securely  against the  edges of the  paper.
Align  the paper guides  securely  against the paper
Paper  guides that  are  too loose or too tight  can cause  misfeeds or paper  jams.
After reloading paper  that  has run  out  during printing,  or resetting the  paper  after a paper  error  notification,  press the  (Paper)
key...