Canon I Sensys Lbp6030 User Guide

Use  Daylight  Saving  TimeOff
OnStartJanuary  to  March
 to  December
1st  to  Last
Monday to  SundayEnd January  to  October to  December
1st  to  Last
Monday to  Sunday
Auto  Sleep  Time Off
After 1  minute
After 5  minutes
After 10 minutes
After 15 minutes
After 30 minutes
After 60 minutes
After 90 minutes
After 120 minutes
After 150 minutes
After 180 minutes
Auto  Shutdown  Time Off
After 1  hour
After 2  hours
After 3  hours
After 4  hours
After 5  hours
After 6  hours
After 7  hours
After 8...

You  can clean  the  fixing unit  inside the  machine.
Cleaning
Clean the  fixing unit  if  black spots or streaks appear  on  printouts.  Note that  you cannot  clean  the  fixing unit  when the  machine has
documents waiting  to  be printed.  To clean  the  fixing unit, you need plain  A4  size paper.  Before starting, load A4  size paper  in the
multi -purpose tray. (
Loading Paper in the Multi- Purpose Tray)
You  can specify  that  a PIN  (system manager password) is  required when logging in to  the...

Enable or disable encrypted  communication via  SSL  and  IP  address packet  filtering.
Remote UI  Settings
Select whether  to  use SSL  encrypted  communication.  Enabling  SSL Encrypted Communication for the Remote  UI
Use  SSL Off
On
Key  and  Certificate Settings
Register key  pairs, or generate  them on  the  machine. You  can check  and  verify registered key  pairs. Configuring  Settings  for
Key  Pairs and  Digital Certificates
CA Certificate Settings
Register a CA certificate.  One  CA...

Use  FilterOff
On
Default  Policy Reject
Allow
IPv4 Address: Inbound Filter
Reject data received by the  machine from a computer  with a specified IPv4  address. Restricting Communication by Using
Firewalls
Use  Filter Off
On
Default  Policy Reject
Allow
IPv6 Address: Outbound Filter
Do not  allow the  machine to  send data to  a computer  with a specified IPv6  address. Restricting Communication by Using
Firewalls
Use  Filter Off
On
Default  Policy Reject
Allow
IPv6 Address: Inbound Filter
Reject data...

Host Name
Domain  Name
DNS Dynamic UpdateOff
OnDNS Dynamic Update Interval:  0  to  24 to  48 (hours)
mDNS Settings Use  mDNSOff
On
mDNS  Name
DHCP Option Settings Acquire Host NameOff
On
DNS Dynamic UpdateOff
On
IPv6 Settings
Specify settings for  using the  machine in an  IPv6  network. Setting IPv6  AddressesConfiguring  DNS
IP Address Settings Use  IPv6Off
On
Stateless Address Off
On
Use  Manual AddressOff
OnIP  Address
Prefix Length: 0  to  64
 to  128
Default  Router Address
Use  DHCPv6 Off
On
DNS...

LPD Print Settings
Enable or disable LPD, a printing protocol that  can be used on  any hardware platform  or operating  system. Configuring
Printing Protocols and  Web Services
Use  LPD  Printing Off
On
NetBIOS Settings
Set a NetBIOS  name and  a workgroup name,  which must be set to  register  this machine with a WINS server. Configuring
NetBIOS
NetBIOS  Name
Workgroup Name
RAW Print Settings
Enable or disable RAW, a Windows  specific printing protocol. Configuring  Printing Protocols and  Web...

MTU Size1300
1400
1500
SNTP Settings
Specify whether  to  acquire the  time  from a time  server  on  the  network. Configuring  SNTP
Use  SNTP Off
OnNTP Server  Name
Polling Interval:  1  to  24
 to  48 (hours)
SNMP Settings
Specify the  settings for  monitoring and  controlling the  machine from a computer  running  SNMP-compatible  software. Monitoring
and  Controlling the Machine  with SNMP
SNMPv1 Settings Use  SNMPv1Off
On
Community  Name 1
MIB Access Permission 1
Read/WriteRead Only
Community  Name...

Waiting Time for Connection at Startup
Specify a wait  time  for  connecting to  a network. Select the  setting depending on  your network environment. Setting a Wait Time
for Connecting to a Network
Waiting  Time 0
 to  300 (seconds)
Wireless LAN Settings
You  can check  wireless LAN settings and  status information. Wireless LAN settings cannot  be changed from the  Remote  UI. Make
wireless LAN settings from the  computer  using the  MF/LBP  Network Setup  Tool.  (Connecting to a Wireless LAN )
[Use...

Initializes  settings and  returns  the  machine to  the  factory default  state.
Initialize  Menu
Returns the  settings in the  [Preferences]  Menu  to  the  factory default  settings.  Initializing  Preferences  Settings
Initialize  System Management Settings
Returns the  settings in the  [System Management Settings] Menu  to  the  factory default  settings.  Initializing  System
Management  Settings
Initialize  Key  and  Certificate
Returns key  and  certificate settings to  the  factory default...

0HWJ-03A
Troubleshooting
When  a problem occurs, check  this chapter  to  find out  solutions  before contacting Canon.
Paper Jams
If  the  paper  jams, see  Clearing Paper Jamsto  remove  the  jammed paper.
A Message Appears
If  the  Printer Status Window  displays an  error  message,  see  When an Error  Message Appears .
Common Problems
If  you suspect that  the  machine is  malfunctioning,  see  the  following  sections before contacting Canon.
Common  Problems
Installation/Settings Problems
Printing...