Canon Hf G30 Owners Manual

Trimming Scenes
101
Trimming Scenes
You can trim MP4 scenes by removing everything up to a certain point or everything after a certain 
point.
1 Play back the desired scene (A95).
2 Pause the playback.
3 Open the screen for trimming scenes.
[Edit]  > [Trim]
4 Bring the scene to a precise point, if necessary.
• The point at which the movie will be trimmed is indicated by the  marker.
• Playback controls will appear on the screen ( A97). Use any special playback modes as 
necessary to locate the desired...

Connecting to an External Monitor
102
External Connections
Connecting to an External Monitor
When you connect the camcorder to an external monitor for recording or playback, use the terminal 
on the camcorder that matches the one you wish to use on the monitor. Then, select the video signal 
output configuration. The camcorder will automatically switch between the AV OUT and HDMI OUT 
terminals based on the external connection.
Connection Diagram
We recommend that you power the camcorder from a household...

Connecting to an External Monitor
103
Using the HDMI OUT Terminal
The HDMITM OUT terminal also offers a digital connection and outputs both a video and audio signal. 
If you selected [ kAutomatic], the output signal will automatically switch to HD or SD depending on 
the capability of the external monitor. In   mode, when the recording mode is set to 28 Mbps 
LPCM (59.94P) or 24 Mbps LPCM, the HDMI OUT terminal outputs two-channel linear PCM audio 
with a sampling frequency of 48 kHz.
1 Open the [HDMI...

Audio Output
104
Audio Output
The camcorder can output audio from the HDMI OUT terminal, AV OUT terminal or × (headphone) 
terminal.
Synchronizing the Video with the Audio being Monitored
When audio is output from the AV OUT terminal or  × (headphone) terminal, you can choose to 
synchronize the audio signal with the video signal or have the camcorder output the audio in real time. 
When the audio is output in real time, there will be a slight delay. Regardless of the setting, however, 
the audio and...

Viewing Photos
105
Photos
Viewing Photos
1 Set the power switch to MEDIA.
• The AVCHD movie index screen will appear.
2 Open the photo index screen.
[6 · ] >  Tab of the desired memory card ( 6 or 7) >  
[ } Photos]
3 Look for the photo you want to play back.
4 Touch the photo you wish to view.
• The photo is displayed in single photo view. 
• Drag your finger left/right to browse through the photos one by one.
• If the optional GP-E2 Receiver was attached to the camcorder during recording, GPS...

Viewing Photos
106
1 Touch the screen to display the playback controls.
2Touch [h].
3 Drag your finger left and right along the scroll bar and then touch [ K].
IMPORTANT
• Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so  may result in permanent data loss.
- Do not open the double memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder’s operating mode.
• The following image files may not be...

Deleting Photos
107
Deleting Photos
You can delete those photos that you are not interested in keeping.
Deleting a Single Photo
1 In single photo view, select the photo you want to delete.
2 Touch the screen to display the playback controls.
3 Open the [Delete] screen.
[FUNC.] > [Delete]
4 Touch [ Proceed] and then touch [Yes].
• The photo is deleted.
5 Drag your finger left/right to select another photo to delete or touch [ X].
Deleting Photos from the Index Screen
1 Open the photo index screen. 
2 Open...

Saving Recordings to a Computer
108
Saving/Sharing Recordings
Saving Recordings to a Computer
Using the supplied software Data Import Utility to save your AVCHD movies, you have the additional 
advantage of automatically joining scenes that were saved as multiple files so you can work with them 
as single scenes with the editing software of your choice. Using the supplied software 
ImageBrowser EX, you can save your MP4 movies and photos.
Connection Diagram
We recommend that you power the camcorder from...

Saving Recordings to a Computer
109
Installing the Software
See Installation  and System requirements  in the Data Import Utility  Software Guide (PDF file) for step-
by-step installation instructions and full system requirements. Below are the main system 
requirements.
1  32-bit version only.2  32-bit and 64-bit versions.
IMPORTANT
• Before saving scenes to your computer with Data Import Utility  using a memory card reader or 
your computer’s memory card slot, do not access or manipulate the files on...

Saving Recordings to a Computer
110
Installing the Software 
Install the software before you connect the camcorder to the computer for the first time. Make sure to 
install the software even if you have a different version of ImageBrowser EX on your computer. The 
auto-update function of the software may make available to you features optimized for this camcorder.
The ‘ImageBrowser EX Instruction Manual’ will also be installed with the software.
POINTS TO CHECK
• Before installing the software, make sure...