Canon Hf G25 User Manual

Recording Movies and Photos
41
NOTES
• About the power saving mode:  If q  >  [Power Saving Mode]  > [Auto Power Off] is set to 
[ i On], the camcorder will shut off automatically to save power when it is powered by a battery 
pack and is left without any operation for 5 minutes. Press  P to turn on the camcorder.
• When recording in bright places, it may be difficult to use the LCD screen. In such cases, you can  turn on the LCD backlight ( A23) or adjust the brightness of the LCD screen with the  q >...

Recording Movies and Photos
42
Recording in n (Manual) Mode
When the mode switch is set to  n (Manual mode), you can enjoy full access to the menus and 
manually adjust the exposure, focus, white balance and many more of the camcorder’s settings to 
your preference. Even in   mode, though, the camcorder can help you with the settings. For 
example, by using Special Scene recording programs ( A64).
1 Set the mode switch to  n.
2 Turn on the camcorder.
3 Record movies and photos.
• The procedure is the...

Recording Movies and Photos
43
• If supported recordings were made on an Eye-Fi card in memory card slot 3, wireless upload will 
start automatically after setting the camcorder to playback mode, if you are within the range of a 
configured network. Always verify that Eye-Fi cards have been approved in the country/region of 
use. See also  Using an Eye-Fi Card  (A 136).
NOTES
• About the power saving mode:  If q  >  [Power Saving Mode]  > [Auto Power Off] is set to 
[ i On], the camcorder will shut off...

Quick Start Function
44
Quick Start Function
When you close the LCD panel with the camcorder on, the camcorder enters the standby mode. In 
standby mode the camcorder consumes only about 1/3 the power used when recording, saving 
energy when you are using a battery pack. Additionally, when you open the LCD panel or pull out the 
viewfinder, the camcorder is ready to start recording in approximately 1 second*, allowing you to 
record the subject right away.
* The actual time required varies depending on...

Selecting the Video Quality (Recording Mode)
45
Selecting the Video Quality (Recording Mode)
The camcorder offers 5 recording modes. Changing the recording mode will change the recording 
time available on the memory. Select MXP or FXP mode for better movie quality; select LP mode for 
longer recording times. The following table gives approximate recording times.
1 Open the [Recording Mode] screen.
[FUNC.] > [MENU]  > r  >  [Recording Mode]
2 Touch the desired recording mode and then touch [ X].
NOTES
•...

Selecting the Frame Rate
46
Selecting the Frame Rate
You can change the frame rate (the number of frames recorded per second) to change the look of your 
movies.
1 Open the [Frame Rate] screen.
[FUNC.] > [MENU] >  r  >  [Frame Rate]
2 Touch the desired frame rate and then touch [ X].
Options
* Recorded as 50i.
Operating modes:
[ µ 50i (Standard)]50 fields per second, interlaced. Standard frame rate of PAL analog TV signals.
[¸ PF25]Shooting at 25 frames per second, progressive*. Using this frame rate...

Focus Adjustment
47
Focus Adjustment
You can adjust the focus manually and use the peaking function to assist you or you can let the 
camcorder focus for you by using autofocus. With autofocus, you can set the autofocus speed.
The camcorder also features two more focusing functions, face detection and Touch & Track.
POINTS TO CHECK
• Adjust the zoom before you start the procedure.
Manual Focus
Use the focus ring to focus manually. You can also use peaking to help you focus more accurately.
1 Open the...

Focus Adjustment
48
5 After adjusting the focus, touch [ON] to return to the preset focus position.• Touch [SET] again to cancel the current preset focus position.
• [ON] will be grayed out while adjusting the focus or zoom.
• You can use the  q >  [Focus Preset Speed] setting to adjust the speed at which the 
camcorder returns to the preset focus position.
NOTES
• The preset focus position will be canceled when the camcorder is turned off.
• When the camcorder is in   mode, the focus preset function...

Focus Adjustment
49
Options( Default value)
NOTES
• When recording in bright surroundings, the camcorder closes down the aperture. This may cause  the picture to appear blurred and is more noticeable toward the wide angle end of the zoom range. 
In such case, select the [ “ Aperture-Pri. AE] or [n Manual Exposure] recording program and set 
p  >  [ND Filter] to [ k Automatic].
• When you set  p >  [Conversion Lens] to a setting other than [ j Off], the [ =Instant AF] 
and [ ? Medium AF] settings are not...

Focus Adjustment
50
By default, face detection is activated. If the function was turned off, perform the following procedure 
to turn it on.
1 Open the [Face Detection & Tracking] screen.
[FUNC.] > [MENU] >  p  >  [Face Detection & Tracking]
2Touch [ iOn}] and then touch [ X].
To select the main subject
If there is more than one person in the picture, the camcorder will automatically select one person it 
determines is the main subject. The main subject is indicated by a white face-detection frame and...