Canon Hf G10 Instruction Manual

Recording Movies and Photos
41
NOTES
• About the power saving mode:  If 6    [Power Saving Mode]   [Auto Power Off] is set to 
[ A On], the camcorder will shut off automatically to save power when it is powered by a battery 
pack and is left without any operation for 5 minutes. Press  x to turn on the camcorder.
• When recording in bright places, it may be difficult to use the LCD screen. In such cases, you can  turn on the LCD backlight ( 023) or adjust the brightness of the LCD screen with the  6...

Recording Movies and Photos
42
Reviewing the Latest Scene Recorded
You can review the last 4 seconds of the last scene recorded with the camcorder without switching to 
playback mode. While reviewing the latest scene, the picture will be played back without sound.
1 Set the mode switch to y or  .
2 Review the last 4 seconds of the scene.  [FUNC.]  [
 Review Recording]
NOTES
• When double slot recording is activated, only the scene recorded on memory card  X will be played 
back.
IMPORTANT
• Observe the...

Quick Start Function
43
Quick Start Function
When you close the LCD panel with the camcorder on, the camcorder enters the standby mode. In 
standby mode the camcorder consumes only about 1/3 the power used when recording, saving 
energy when you are using a battery pack. Additionally, when you open the LCD panel or pull out the 
viewfinder, the camcorder is ready to start recording in approximately 1 second*, allowing you to 
record the subject right away.
* The actual time required varies depending on...

Selecting the Video Quality (Recording Mode)
44
Selecting the Video Quality (Recording Mode)
The camcorder offers 5 recording modes. Changing the recording mode will change the recording 
time available on the memory. Select MXP or FXP mode for better movie quality; select LP mode for 
longer recording times. The following table gives approximate recording times.
1 Open the [Recording Mode] screen.
[FUNC.]  [MENU]  8  [Recording Mode]
2 Touch the desired recording mode and then touch [ a].
NOTES
• Movies...

Selecting the Frame Rate
45
Selecting the Frame Rate
You can change the frame rate (the number of frames recorded per second) to change the look of your 
movies.
1 Open the [Frame Rate] screen.
[FUNC.]  [MENU]  8   [Frame Rate]
2 Touch the desired frame rate and then touch [ a].
Options
* Recorded as 60i.
NOTES
• Movies recorded with the [  24P] frame rate cannot be converted to standard definition using the  camcorder. If you want to upload your movies to video sharing Web sites, set the frame rate to...

Focus Adjustment
46
Focus Adjustment
You can adjust the focus manually and use the peaking function to assist you or you can let the 
camcorder focus for you by using autofocus. With autofocus, you can set the autofocus speed.
The camcorder also features two more focusing functions, face detection and Touch & Track.
POINTS TO CHECK
• Adjust the zoom before you start the procedure.
Manual Focus
Use the focus ring to focus manually. You can also use peaking to help you focus more accurately.
1 Open the...

Focus Adjustment
47
5 After adjusting the focus, touch [ ] to return to the preset focus position.• Touch [ ] again to cancel the current preset focus position.
• [ ] will be grayed out while adjusting the focus or zoom.
• You can use the 6    [Focus Preset Speed] setting to adjust the speed at which the 
camcorder returns to the preset focus position.
NOTES
• The preset focus position will be canceled when the camcorder is turned off.
• When the camcorder is in   mode, the focus preset function cannot...

Focus Adjustment
48
NOTES
• While using autofocus, you can turn the manual ring to focus manually. When you stop turning the  ring, the camcorder returns to autofocus. This is useful in situations such as when focusing on a 
subject on the other side of a window.
• When recording in bright surroundings, the camc order closes down the aperture. This may cause 
the picture to appear blurred and is more noticeable toward the wide angle end of the zoom range. 
In such case, set  7   [ND Filter] to [ O...

Focus Adjustment
49
To select the main subject
If there is more than one person in the picture, the camcorder will automatically select one person it 
determines is the main subject. The main subject is indicated by a white face detection frame and the 
camcorder will optimize the settings for that person. Other faces will have gray frames.
Touch a different face on the touch screen to optimize the 
camcorder’s settings for that person using the Touch & Track 
function.
Limiting Autofocus to Faces
While...

Focus Adjustment
50
Touch & Track
When recording a group of people using face detection, the camcorder will automatically detect one 
person as the main subject. You can use Touch & Track to tell the camcorder to track and optimize 
settings for a different person. You can also use Touch & Track to always keep in focus other moving 
subjects, such as pets or moving vehicles.
1 Make sure face detection (048) and autofocus ( 047) are activated.
• Face detection is always activated in   mode.
2 Point the...