Canon GL2 Instruction Manual

121
E
Using a Memory Card
2Card Jump Function
You can jump from the current image to the desired image of unadjacent image number without
displaying the images one by one.
The numbers shown in the upper right corner in CARD PLAY (VCR) mode indicate the image
number of the current still image and the total number of still images on the memory card.
With a still image in the display, press and hold the CARD +/– button.
•Press the + button to jump forwards through the images and press the – button to jump...

122
E
Using a Memory Card
You can easily erase unwanted still images while viewing them, protect them from accidental
erasure, or mark them for printing. (File Operation)
●Preventing Accidental Erasure (Protect  )
Select important images and protect them from accidental erasure.
•If a memory card is formatted, however, all images, including protected images, will be
permanently erased.
1.+➡File Operation menu  ( 123)
2.+➡Card Operations submenu  ( 124)
●Marking a Still Image for Printing (Print Mark  )...

123
E
Using a Memory Card
1. With an image in the display, press the SELECT dial in to open the FILE OPER.
menu.
•PROTECT  , PRINT MARK  , and IMAGE ERASE settings appear.
•If you select |RETURN, the menu disappears from the display.
2. Select PROTECT  and press the SELECT dial in.
•The  protect mark appears on the image, and the image cannot be erased.
•Press the SELECT dial again to cancel it.
•If you select |RETURN, the menu disappears from the display.
•To cancel image protection, select PROTECT  and...

124
E
Using a Memory Card
REC SEARCH
CARD   SLIDE
SHOW
This section describes how to protect the still image from the Card Operation submenu when
displaying an index screen in CARD PLAY (VCR) mode (including the way to cancel the setting).
You can also protect a still image through the File Operation menu ( 123).
PROTECTCARD OPER.
(20)
Make sure a memory card that has images recorded on it is inserted into the camcorder.
1. With an image in the display, press the INDEX SCREEN button.
•Up to 6 images...

125
E
Using a Memory Card
This section describes how to mark a still image for printing from Card Operation submenu in
CARD PLAY (VCR) mode (including the way to cancel the setting).
–When displaying an index screen, you can mark the still image for printing.
–When playing back a single image, you can erase all print marks.
You can also mark a still image for printing through File Operation menu ( 123).
Marking a Still Image for Printing While Viewing an Index Screen
Make sure a memory card that has...

126
E
Using a Memory Card
Make sure a memory card that has images recorded on it has been inserted into the camcorder.
1. With a still image in the display, open the menu and select CARD OPER.
2. Select PRINT MARKS  ALL ERASE.
•ERASE ALL PRINT MARKS  ? YES NO appears in the display.
3. Select YES.
•The  print mark disappears from the image.
4. Close the menu.
PRINT MARKS  ALL ERASECARD OPER.
(20)
Erasing all Print Marks
+PLAY
(VCR)CARD 

127
E
Using a Memory Card
REC SEARCH
CARD   SLIDE
SHOW
This section describes how to erase still images from the Card Operation submenu when playing
back a single image in CARD PLAY (VCR) mode.
You can also erase a still image through the File Operation menu ( 123).
Make sure a memory card that has images recorded on it is inserted into the camcorder.
1. Select the still image you wish to erase.
•Use the index screen ( 121) or card jump function ( 121) if necessary and make sure the
image you wish to...

128
E
Using a Memory Card
1. Open the menu and select CARD OPER.
2. Select IMAGE ERASE.
•CANCEL, SINGLE and ALL settings appear.
•To cancel erasing, select CANCEL and close the menu.
3. Select ALL.
•ERASE ALL IMAGES? [EXCEPT FOR  IMAGES] NO YES appears in the display.
4. Select YES.
•All images in the folder of the displayed image except the protected ones are erased.
•If you select NO, you return to step 2.
5. Close the menu.
To erase all still images in a folder 

129
E
Using a Memory Card
Combine a title image recorded on a memory card with camcorder recordings. You can change the
color of a title and adjust the mix level. 
•Speedlite and video light cannot be used when creating a title.
1. Insert a memory card into the camcorder.
2. Slide the POWER switch to CAMERA and the TAPE/CARD switch to TAPE.
3. Open the menu and select \TITLE MIX.
•The title mix menu appears.
4. Select \CREATE TITLE.
•The CREATE TITLE menu appears.
5. Press the PHOTO button halfway....

130
E
Using a Memory Card
1. Slide the POWER switch to CAMERA and the TAPE/CARD switch to TAPE.
2. Open the menu and select \TITLE MIX.
•The title mix menu appears.
3. Select \TITLE SELECT.
•Up to 6 titles images are displayed.
4. Select the title you wish to combine.
5. Press the SELECT dial in.
•You return to the title mix menu.
1.  Slide the program selector to Qand select a recording program.
•Title mix cannot be used in the 
[(Easy Recording) program.
2. Press the MIX/SLIDE SHOW button.
•The...