Canon G9 X Owners Manual

							161
Switching the Color of Screen Information
 Still Images  Movies
Information displayed on the screen and menus can be changed to a color 
suitable for shooting under low-light conditions. Enabling this setting is 
useful in modes such as [
] (= 63).
 z
Choose [Night Display] on the [2] tab, 
and then choose [On] ( = 29).
 z
To restore the original display, choose 
[Off].
 ● You can also return the setting to [Off] by holding down the 
[] button for at least one second on the shooting screen or 
in Playback mode during single-image display.
Using Eco Mode
This function allows you to conserve battery power in Shooting mode. 
When the camera is not in use, the screen quickly darkens to reduce 
battery consumption.
1 Configure the setting.
 z Choose [Eco Mode] on the [2] tab, and 
then choose [On].
 z [] is now shown on the shooting 
screen ( = 188).
 z
The screen darkens when the camera 
is not used for approximately two 
seconds; approximately ten seconds 
after darkening, the screen turns off. 
The camera turns off after approximately 
three minutes of inactivity.
Electronic Level Calibration
Calibrate the electronic level if it seems ineffective in helping you level the 
camera.
For greater calibration accuracy, display grid lines ( =
 98) to help you 
level the camera in advance.
1 Make sure the camera is level.
 z Place the camera on a flat surface, such 
as a table.
2 Calibrate the electronic level.
 zChoose [Electronic Level] on the [1] tab, 
and then press the [] button.
 z Choose [Calibrate] and press the 
[] button. A confirmation message is 
displayed.
 z Touch [OK].
Resetting the Electronic Level
Restore the electronic level to its original state as follows. Note that this is 
not possible unless you have calibrated the electronic level.
 zChoose [Electronic Level] on the [1] tab, 
and then press the [] button.
 z Choose [Reset], and then press the [] 
button.
 z Touch [OK].
Accessories
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wi-Fi Functions
Setting Menu  
						

							162
 ●For maximum brightness, press and hold the [] button 
for at least one second when the shooting screen is displayed 
or when in single-image display. (This will override the [Disp. 
Brightness] setting on the [
2] tab.) To restore the original 
brightness, press and hold the [] button again for at least 
one second or restart the camera.
World Clock
To ensure that your shots will have the correct local date and time when 
you travel abroad, simply register the destination in advance and switch to 
that time zone. This convenient feature eliminates the need to change the 
Date/Time setting manually.
1 Specify your home time zone.
 z Choose [Time Zone] on the [2] tab, and 
then press the [] button.
 z When configuring this setting for the first 
time, make sure [ Home] is selected, 
and then press the [] button.
 z Touch [][] to choose the home time 
zone.  
To set daylight saving time (1 hour 
ahead), touch [
].
 z Press the [] button.
2 Specify your destination.
 zTouch [ World], and then press the [] 
button.
 z Touch [][] to choose the destination 
time zone.
 z If necessary, specify daylight saving time 
as in step 1.
 zPress the [] button.
2 Shoot.
 zTo activate the screen and prepare for 
shooting when the screen is off but the 
lens is still out, press the shutter button 
halfway.
Power-Saving Adjustment
Adjust the timing of automatic camera and screen deactivation (Auto 
Power Down and Display Off, respectively) as needed ( = 26).
 z
Choose [Power Saving] on the [2] tab, 
and then press the [] button.
 z Choose an item, and then choose an 
option.
 ● To conserve battery power, you should normally choose [On] for 
[Auto Power Down] and [1 min.] or less for [Display Off].
 ●The [Display Off] setting is applied even if you set [Auto Power 
Down] to [Off].
 ●These power-saving functions are not available when you have 
set Eco mode ( = 161) to [On].
Screen Brightness
Adjust screen brightness as follows.
 z
Choose [Disp. Brightness] on the [2] 
tab, and then press the [] button.
 z Touch [][] to adjust the brightness.
Accessories
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wi-Fi Functions
Setting Menu  
						

							163
Display Language
Change the display language as needed.
 zChoose [Language ] on the [3] tab, 
and then press the [] button.
 z Choose a language, and then press the 
[] button.
 ● You can also access the [Language] screen in Playback mode by 
pressing and holding the [] button and immediately pressing 
the [] button.
Silencing Camera Operations
Silence camera sounds and movies as follows.
 z Choose [Mute] on the [3] tab, and then 
choose [On].
 ● Operation can also be silenced by holding down the [] 
button as you turn the camera on.
 ● Sound is not played during movies ( = 103) if you mute camera 
sounds. To restore sound during movies, drag up across the 
screen. Adjust volume by dragging up or down, as needed.
3 Switch to the destination time zone.
 z Make sure [ World] is selected, and 
then press the [] button.
 z [] is now shown on [Time Zone] and 
shooting screens ( = 188).
 ●
Adjusting the date or time while in [] mode ( = 21) will 
automatically update your [ Home] time and date.
Date and Time
Adjust the date and time as follows.
 z Choose [Date/Time] on the [2] tab, and 
then press the [] button.
 z Touch the option to configure, and then 
touch [][] to specify the date and 
time.
Lens Retraction Timing
The lens is normally retracted for safety about one minute after you press 
the [] button in Shooting mode ( = 25). To have the lens retracted 
immediately after you press the [] button, set the retraction timing to 
[0 sec.].
 z Choose [Lens Retraction] on the [2] tab, 
and then choose [0 sec.].
Accessories
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wi-Fi Functions
Setting Menu  
						

							164
Hiding Hints and Tips
Hints and tips are normally shown when you choose Quick Set menu 
(= 28) items. If you prefer, you can deactivate this information.
 z
Choose [Hints & Tips] on the [3] tab, 
and then choose [Off].
Listing Shooting Modes by Icon
List shooting modes on the selection screen by icon only, without mode 
names, for faster selection.
 z Choose [Mode icon size/info] on the [3] 
tab, and then choose [Small, no info].
Increasing Touch-Screen Panel Sensitivity
Sensitivity of the touch-screen panel can be increased, so that the camera 
responds to a lighter touch.
 z Choose [Touch Operation] on the [4] 
tab, and then choose [Sensitive].
Adjusting the Volume
Adjust the volume of individual camera sounds as follows.
 z Choose [Volume] on the [3] tab, and 
then press the [] button.
 z Drag up or down to choose an item, and 
then adjust the volume by touching the 
desired position on the bar.
Customizing Sounds
Customize camera operating sounds as follows.
 zChoose [Sound Options] on the [3] tab, 
and then press the [] button.
 z Choose an item, and then press the [] 
button.
 z Choose an option.
 ● The shutter sound in digest movies recorded in [] mode 
( = 35) cannot be changed.
Start-Up Screen
Customize the start-up screen shown after you turn the camera on as 
follows.
 z
Choose [Start-up Image] on the [1] tab, 
and then press the [] button.
 z Choose an option.
Accessories
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wi-Fi Functions
Setting Menu  
						

							165
Checking Certification Logos
Some logos for certification requirements met by the camera can be 
viewed on the screen. Other certification logos are printed in this guide, on 
the camera packaging, or on the camera body.
 zChoose [Certification Logo Display] on 
the [4] tab, and then press the [] 
button.
Setting Copyright Information to Record in 
Images
To record the author’s name and copyright details in images, set this 
information beforehand as follows.
 z Choose [Copyright Info] on the [4] tab, 
and then press the [] button.
 z Choose [Enter Author’s Name] or [Enter 
Copyright Details], press the [] button 
to access the keyboard, and then enter 
the name ( =
 30).
 z
Press the [] button. When [Accept 
changes?] is displayed, touch [Yes].
 z The information set here will now be 
recorded in images.
 ● To check the information entered, choose [Display Copyright Info] 
on the screen above, and then press the [] button.
Automatically Locking the Touch-Screen Panel
To prevent unintended operations, you can set up automatic locking of the 
touch-screen panel.
 zChoose [Screen auto-lock settings] on 
the [4] tab, and then press the [] 
button.
 z Choose [Screen auto lock], and then 
choose [Enable].
 zChoose [Auto-locks after], and then 
choose an option.
 zTo unlock the touch-screen panel, press 
the shutter button halfway.
 ● The touch-screen panel can also be unlocked by pressing or 
turning controls, such as the [] button or [] ring.
Metric / Non-Metric Display
Change the unit of measurement shown in the zoom bar ( = 33), the 
MF indicator ( = 81), and elsewhere from m/cm to ft/in as needed.
 z
Choose [Units] on the [4] tab, and then 
choose [ft/in].
Accessories
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wi-Fi Functions
Setting Menu  
						

							166
Restoring Default Camera Settings
If you accidentally change a setting, you can restore default camera 
settings.
1 Access the [Reset All] screen.
 zChoose [Reset All] on the [5] tab, and 
then press the [] button.
2 Restore default settings.
 z Touch [OK].
 zDefault settings are now restored.
 ● The following functions are not restored to default settings. -Information registered using Face ID ( = 43) -
[1] tab setting [Video system] ( = 160) -
[2] tab settings [Time Zone] ( = 162), [Date/Time] (= 163), 
and [3] tab setting [Language ] ( = 163) -
Custom white balance data you have recorded ( = 78) -
Shooting Mode -Wi-Fi settings ( = 131) -
Calibrated value for the electronic level ( = 161) -
Copyright information ( = 165)
Deleting All Copyright Information
You can delete both the author’s name and copyright details at the same 
time as follows.
 z
Follow the steps in “Setting Copyright 
Information to Record in Images” 
(=
 165) and choose [Delete Copyright 
Info].
 z Touch [OK].
 ● The copyright info already recorded in images will not be deleted.
Adjusting Other Settings
The following settings can also be adjusted.
 ●[4] tab setting [Wi-Fi Settings] ( = 131)
 ●
[4] tab setting [Mobile Device Connect Button] ( = 134)
Accessories
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wi-Fi Functions
Setting Menu  
						

							167
System Map
*1 Also available for purchase separately.
*2 A genuine Canon accessory is also available (Interface Cable IFC-600PCU).
*3 Use a commercially available cable no longer than 2.5 m (8.2 ft.).
Wrist Strap Battery Pack
NB-13L*1Battery Charger
CB-2LH/CB-2LHE*1
USB Cable (camera end: Micro-B)*2
Memory Card Card Reader Computer
TV/Video System
Connect
Station CS100
AC Adapter Kit
ACK-DC110
Included Accessories
Power
Cables
HDMI Cable
(camera end: Type D)*
3
Power
PictBridge-Compatible Printers
High-Power Flash HF-DC2
Compact Power Adapter
CA-DC30/CA-DC30E
Flash Unit
Accessories
Enjoy the camera in more ways with optional Canon 
accessories and other compatible accessories sold 
separately
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories  
						

							168
Optional Accessories
The following camera accessories are sold separately. Note that 
availability varies by area, and some accessories may no longer be 
available.
Power Supplies
Battery Pack NB-13L
 zRechargeable lithium-ion battery
Battery Charger CB-2LH/CB-2LHE
 zCharger for Battery Pack NB-13L
 ● The message [Battery communication error] is displayed if you 
use a non-genuine Canon battery pack, and user response is 
required. Note that Canon shall not be liable for any damages 
resulting from accidents, such as malfunction or fire, that occur 
due to use of non-genuine Canon battery packs.
 ●The battery pack includes a convenient cover which you can 
attach to know the charge status at a glance. Attach the cover so 
that 
 is visible on a charged battery pack, and attach it so that  is not visible on an uncharged battery pack.
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used 
with genuine Canon accessories.
Canon shall not be liable for any damage to this product and/or accidents 
such as fire, etc., caused by the malfunction of non-genuine Canon 
accessories (e.g., a leakage and/or explosion of a battery pack). Please 
note that any repairs your Canon product may require as a result of such 
malfunction are not covered under warranty and will incur a fee.
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories  
						

							169
Other Accessories
Interface Cable IFC-600PCU
 zFor connecting the camera to a computer 
or printer.
Printers
Canon-Brand PictBridge-Compatible 
Printers
 zEven without using a computer, you can 
print images by connecting the camera 
directly to a printer.  
For details, visit your nearest Canon 
retailer
.
Photo and Movie Storage
Connect Station CS100
 ●A media hub for storing camera images, 
viewing on a connected TV, printing 
wirelessly on a Wi-Fi-compatible printer
, 
sharing over the Internet, and more.
AC Adapter Kit ACK-DC110
 z For powering the camera using 
household power. Recommended when 
using the camera over extended periods, 
or when connecting the camera to a 
printer or computer. Cannot be used to 
charge the battery pack in the camera.
Compact Power Adapter   
CA-DC30/CA-DC30E
 z Insert the included battery pack into the 
camera for charging. Interface Cable 
IFC
-600PCU (sold separately) is required 
to connect the adapter to the camera.
 ● The battery charger, AC adapter kit, and compact power adapter 
can be used in areas with 100 – 240 V AC power (50/60 Hz).
 ●For power outlets in a different format, use a commercially 
available adapter for the plug. Never use an electrical transformer 
designed for traveling, which may damage the battery pack.
Flash Unit
High-Power Flash HF-DC2
 zExternal flash for illuminating subjects 
that are out of range of the built-in flash.   
High-Power Flash HF-DC1 can also be 
used.
 ● High-Power Flash units cannot be used in [], [], or [] 
shooting mode when [Flash Mode] is set to [Manual].
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories  
						

							170
 zOn the camera, open the terminal cover 
and insert the cable plug fully into the 
camera terminal.
3 Turn the TV on and switch to 
external input.
 zSwitch the TV input to the external input 
you connected the cable to in step 2.
4 Turn the camera on.
 zPress the [] button.
 zImages from the camera are now 
displayed on the TV. (Nothing is 
displayed on the camera screen.)
 zWhen finished, turn off the camera and 
TV before disconnecting the cable.
 ● Some information may not be displayed when viewing images on 
a TV ( = 189). ●
Camera operating sounds are not played while the camera is 
connected to an HDTV.
Using Optional Accessories
 Still Images  Movies
Playback on a TV
 Still Images  Movies
You can view your shots on a TV by connecting the camera to an HDTV 
with a commercially available HDMI cable (not exceeding 2.5 m / 8.2 ft., 
with a Type D terminal on the camera end). Movies shot at an image 
quality of [
], [], [], [], [], [], or 
[] can be viewed in high definition.
For details on connection or how to switch inputs, refer to the  TV manual.
 ●The following camera functions are available when using a TV for 
display.
 -Browsing images  
Drag left or right across the screen ( = 103).
 -
Playing movies ( = 104)
 -
Zoom in ( = 112) 
To zoom in, move the zoom lever toward [] or spread your fingers 
apart (pinch out).
 - Group playback ( = 110)
 -
Touch Actions ( = 119) 
Erasing is not available.
Note that when the camera is connected to a TV, nothing is displayed on 
the camera screen. Watch the TV screen as you control the camera.
1 Make sure the camera and TV are 
off.
2 Connect the camera to the TV.
 z On the TV, insert the cable plug fully into 
the HDMI input as shown.
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories