Canon Eos Rebel Xsi 450d Instruction Manual

31
The captured image is recorded onto the card (sold separately).Make sure the card’s write protect switch is set upward to 
enable writing/erasing.
1Open the cover.
 Slide the cover as shown by the 
arrow to open it.
2Insert the Card.
 As shown by the  illustration, face 
the card’s label side toward you 
and insert it until it clicks in place.
3Close the cover.
  Close the cover and slide it in the 
direction shown by the arrow until it 
snaps shut.
  When you set the power switch to 
, the number of...

Installing and Removing the Card
32
1Open the cover.
 Set the power switch to < 2>.
  Check that “Recording...” is not 
displayed on the LCD monitor.
  Make sure the access lamp is off, 
then open the cover.
2Remove the card.
 Gently push in the card, then let go. 
The card will stick out.
  Pull the card straight out, then close 
the cover.
Removing the Card
Access lamp
 When the access lamp is lit or blinking, it indicates that the images 
are being written to or read by the card, being erased, or...

33
1Remove the caps.
 Remove the rear lens cap and the 
body cap by turning them as shown 
by the arrow.
2Attach the lens.
 Align the EF-S lens with the camera’s 
white EF-S lens mount index and turn 
the lens as shown by the arrow until it 
clicks in place.
 
When attaching a lens other than an 
EF-S lens, align the lens with the red 
EF lens mount index.
3On the lens, set the focus mode 
switch to  (autofocus).
  If it is set to < MF> (manual focus), 
autofocus will not operate.
4Remove the front lens...

Mounting and Detaching a Lens
34
To zoom, turn the zoom ring on the lens 
with your fingers.
If you want to zoom, do it before 
focusing. Turning the zoom ring after 
achieving focus may throw off the 
focus slightly.
While pressing the lens release 
button, turn the lens as shown by 
the arrow.
 Turn the lens until it stops, then 
detach it.
About Zooming
Detaching the Lens
Minimizing Dust
  When changing lenses, do it in  a place with minimal dust.
  When storing the camera without a lens attached, be...

35
The procedure explained here is based on the EF-S18-55mm f/3.5-5.6 
IS lens as an example.
* IS stands for Image Stabilizer.
1Set the IS switch to .
 Set the camera’s power switch to 
.
2Press the shutter button halfway.
XThe Image Stabilizer will operate.
3Take the picture.
  When the picture looks steady in the 
viewfinder, press the shutter button 
completely to take the picture.
About the Lens Image Stabilizer
  The Image Stabilizer is not effective for moving subjects.
  The Image Stabilizer may...

36Turn the dioptric adjustment 
knob.
 
Turn the knob left or right so that the 
nine AF points in the viewfinder look 
sharp.
To obtain sharp images, hold the camera still to minimize camera 
shake.
1. Wrap your right hand around the camera grip firmly.
2. Hold the lens bottom with your left hand.
3. Press the shutter button lightly with your right hand’s index finger.
4. Press your arms and elbows lightly  against the front of your body.
5. Press the camera against your face and look through the...

37
Basic Operation
The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely.
Pressing halfway
This activates autofocusing and 
automatic exposure metering that sets 
the shutter speed and aperture.
The exposure setting (shutter speed and 
aperture) is displayed in the viewfinder. 
(0 )
Pressing completely
This releases the shutter and takes the 
picture.
Preventing Camera Shake
Camera movement during the moment of exposure is...

38
By setting various optional settings with the menus, you can set the image-
recording quality, date/time, etc. While looking at the LCD monitor, you use the 
 button,  cross keys, and  button on the camera back.
Menu Operations and Settings
 Cross keys
Ta b
Menu items
Menu settings
1 Shooting
< M > button
LCD monitor
5 Set-up
9 My Menu
<
0 > button
3 Playback
* The [2 /7 /9] tabs are not displayed in the Full Auto and Basic Zone modes. When a Basic Zone mode is set, there are menu items which are not...

39
Menu Operations and Settings
1Display the menu.
 Press the < M> button to display 
the menu.
2Select a tab.
  Press the < U> key to select a 
menu tab.
  You can also turn the < 6> dial to 
select a tab.
3Select a menu item.
  Press the < V> key to select the 
menu item, then press < 0>.
4Select the setting.
  Press the < V> or < U> key to 
select the setting. (Some settings 
require you to press either the < V> 
or < U > key to select it.)
  Some menus will indicate the current 
setting in blue....

40
If the card is new or was previously formatted by another camera or 
personal computer, format the card with the camera.Formatting the card will erase ever ything in the card. Even 
protected images will be erased, so make sure there is 
nothing you need to keep. If necessary, transfer the images to 
a personal computer before formatting the card.
1Select [Format].
  Under the [ 5] tab, select [ Format], 
then press < 0>.
2Format the card.
  Select [ OK], then press < 0>.
X The card will be...