Canon Eos Rebel T6i 750d Instruction Manual

331
W Digital Print Order Format (DPOF)
 Sel.Image
Select and order images one by one.
By pressing the  button, you can 
select images from a three-image 
display. To return to the single-image 
display, press the < u> button.
Press the < M> button to save the 
print order to the card.
[Standard] [Both]
Press the < W> < X> keys to set the 
number of copies to be printed for the 
displayed image.
[Index]
Press < 0> to add a checkmark to the 
box < X>. The image will be included in 
the index print.
...

332
With a PictBridge printer, you can easily 
print images with DPOF.
1Prepare to print.
See page 320.
Follow the “Connecting the Camera to a Printer” procedure up to step 5.
2Under the [ x1] tab, select [Print order].
3Select [Print].
[Print ] will be displayed only if the camera is connected to a 
printer and printing is possible.
4Set the [Paper settings] (p.322).
 Set the printing effects (p.324) if necessary.
5Select [OK].
W  Direct Printing of  Print-Ordered Images
Before printing, be sure to...

333
You can specify up to 998 images to be printed in a photobook. When 
you use EOS Utility (EOS software) to transfer images to a computer, 
the specified images will  be copied to a dedicated folder. This function 
is useful for ordering photobooks online.
1Select [Photobook Set-up].
Under the [x 1] tab, select 
[Photobook Set-up ], then press 
< 0 >.
2Select [Select images].
 Select [ Select images ], then press 
< 0 >.
 An image will be displayed.
3Select the image to be specified.
 Press the <...

p Specifying Images for a Photobook
334
You can specify all the images in a folder or on a card at once.
When [x1: Photobook Set-up ] is set 
to [All images in folder ] or [All images 
on card ], all the images in the folder or 
on the card will be specified.
To cancel the image specification, select 
[Clear all in folder ] or [Clear all on 
card ].
Specifying All Images in a Folder or on a Card
RAW images and movies cannot be specified.
 Do not specify images already spec ified for a photobook in...

335
13
Customizing theCamera
You can customize various camera functions to suit 
your picture-taking preferences with Custom Functions. 
Custom Functions can be set and used only in Creative 
Zone modes.
     Creative Zone 

336
1Select [Custom Functions (C.Fn)].
Under the [5 4] tab, select [ Custom 
Functions (C.Fn) ], then press .
2Select the Custom Function 
number.
 Press the < Y> < Z> keys to select 
the Custom Function number, then 
press < 0>.
3Change the setting as desired.
 Press the < W> < X> keys to select 
the desired setting (number), then 
press < 0>.
 Repeat steps 2 and 3 if you want to 
set other Custom Functions.
 At the bottom of the screen, the 
current Custom Function settings are 
indicated below...

337
3 Setting Custom Functions K
Custom Functions
C.Fn I: ExposureA LV  
Shooting k
Movie 
Shooting
1Exposure level incrementsp.338kk
2ISO expansionkIn  a
C.Fn II: Image
3Highlight tone priorityp.339kk
C.Fn III: Autofocus/Drive
4AF-assist beam firingp.340k*
5 AF area selection method
6Auto AF point selection: Color Trackingp.3417AF point display during focus
8 VF display illumination
p.342
9Mirror lockup
* When an EX-series Speedlite (sold separately) equipped with an LED light is used.
C.Fn IV:...

338
Custom Functions are organized into four groups based on the function 
type: C.Fn I: Exposure, C.Fn II: Image, C.Fn III: Autofocus/Drive, C.Fn 
IV: Operation/Others.
3 Custom Function SettingsK
C.Fn I: Exposure
C.Fn-1 Exposure level increments
0: 1/3-stop
1: 1/2-stop Sets 1/2-stop increments for the shutter speed, aperture, exposure 
compensation, AEB, flash exposure compensation, etc. This is 
effective when you prefer to control the exposure in less fine 
increments than 1/3-stop increments.
C.Fn-2...

339
3 Custom Function Settings K
C.Fn II: Image
C.Fn-3 Highlight tone priority
0: Disable
1: Enable
Improves the highlight detail.  The dynamic range is expanded from 
the standard 18% gray to bright highlights. The gradation between 
the grays and highlights becomes smoother.
 With setting 1, the Auto Lighting Optimizer (p.136) is automatically set to 
[Disable ] and the setting cannot be changed.
 With setting 1, noise (grainy image, banding, etc.) may become slightly 
more noticeable than with...

3 Custom Function Settings K
340
C.Fn III: Autofocus/Drive
C.Fn-4 AF-assist beam firing
Enables or disables the built-in flash’s AF-assist beam or the EOS-
dedicated external Speedlite’s AF-assist beam.
0: Enable
The AF-assist beam will be emitted when necessary.
1: Disable The AF-assist beam will not be emitted. This prevents the AF-
assist beam from disturbing others.
2: Enable external flash only If an external Speedlite is attached,  it will emit the AF-assist beam 
when necessary. The camera’s...