Canon Eos Rebel T3 1100d Instruction Manual

211
You can set the print type, date imprinting, and file No. imprinting. The 
print settings will be applied to all print-ordered images. (They cannot 
be set individually for each image.)
1Select [Print order].
  Under the [ 3] tab, select [Print 
order], then press < 0>.
2Select [Set up].
  Select [Set up ], then press .
3Set the option as desired.
  Set the [Print type ], [Date ], and [ File 
No. ].
  Select the option to be set, then press 
. Select the desired setting, 
then press < 0>.
W Digital...

W Digital Print Order Format (DPOF)
212
4 Exit the setting.
 Press the < 7> button.
XThe print order screen will reappear.
  Next, select [Sel.Image], [ Byn ], or 
[All image] to order the images to be 
printed.
Print type
KStandard Prints one image on one sheet.
LIndexMultiple thumbnail images  are printed on one sheet.
K
LBothPrints both the standard and index prints.
Date On
[On ] imprints the recorded  date on the print.
Off
File numberOn[On ] imprints the file No. on the print.
Off
  Even if [ Date]...

213
W Digital Print Order Format (DPOF)
 Sel.Image
Select and order images one by one.
To display the three-image display, press 
the  button. To return to the 
single-image display, press the < u> 
button.
After completing the print order, press 
the < M > button to save the print 
order to the card.
[Standard] [Both]
Press the < V> key to set the number of 
copies to be printed for the displayed 
image.
[Index]
Press the < V> key to checkmark the 
box < X> and the image will be included 
in the index...

214
With a PictBridge printer, you can easily 
print images with DPOF.
1Prepare to print.
 See page 202. Follow the “Connecting  the Camera to a Printer” 
procedure up to step 5.
2Under the [ 3] tab, select [Print order].
3Select [Print].
  [Print] will be displayed only if the camera is connected to a 
printer and printing is possible.
4Set the [Paper settings] (p.204).
 Set the printing effects (p.206) if necessary.
5Select [OK].
W Direct Printing with DPOF
  Before printing, be sure  to set the paper...

215
Customizing theCamera
You can customize various came ra features to suit your 
picture-taking preferences with Custom Functions. 
Custom Functions can be set and used only in Creative 
Zone modes.
Creative Zone
COPY  

216
1Select [Custom Functions (C.Fn)]. 
 Under the [ 7] tab, select [Custom 
Functions (C.Fn)], then press < 0>.
2Select the Custom Function No.
  Press the < U> key to select the 
Custom Function No., then press 
< 0 >.
3Change the setting as desired.
  Press the < V> key to select the 
setting (number), then press < 0>.
  Repeat steps 2 and 3 if you want to 
set other Custom Functions.
  At the bottom of the screen, the 
current Custom Function settings are 
indicated below the respective 
function...

217
3 Setting Custom Functions N
Custom Functions
C.Fn I: ExposureA LV shooting
1Exposure level incrementsp.218k
2Flash sync. speed in Av modek
C.Fn II: Image
3Long exposure  noise reductionp.219k
4High ISO speed noise reductionk
5 Highlight tone priority p.220k
C.Fn III: Autofocus/Drive
6 AF-assist beam firing p.220k (With  f*)
* If you use an EX-series Speedlite (s old separately) equipped with a LED 
light, the LED light will turn on  for AF-assist even in the d and  c 
modes.
C.Fn IV:...

218
Custom Functions are organized into four groups based on the function 
type: C.Fn I: Exposure, C.Fn II: Image,  C.Fn III: Autofocus/Drive, C.Fn 
IV: Operation/Others.
3 Custom Function Settings N
C.Fn I: Exposure
C.Fn-1 Exposure level increments
0: 1/3-stop
1: 1/2-stop
Sets 1/2-stop increments for the  shutter speed, aperture, exposure 
compensation, AEB, flash exposure  compensation, etc. Effective when 
you prefer to control the exposure in  less fine increments than 1/3-stop 
increments.
C.Fn-2...

219
3 Custom Function Settings N
C.Fn II: Image
C.Fn-3 Long exposure noise reduction
0: Off
1: Auto
For 1 sec. or longer exposure s, noise reduction is performed 
automatically if noise typical of lo ng exposures is detected. This [Auto] 
setting is effective in most cases.
2: On Noise reduction is performed for all ex posures of 1 sec. or longer. The 
[ On ] setting may be effective for no ise that cannot be detected or 
reduced with the [Auto ] setting.
C.Fn-4 High ISO speed noise reduction
Reduces the...

3 Custom Function Settings N
220
C.Fn-5 Highlight tone priority
0: Disable
1: Enable
Improves the highlight detail. The  dynamic range is expanded from the 
standard 18% gray to bright highli ghts. The gradation between the grays 
and highlights becomes smoother.
C.Fn III: Autofocus/Drive
C.Fn-6 AF-assist beam firing
The AF-assist beam can be emitted by t he camera’s built-in flash or by an 
external, EOS-dedicated Speedlite.
0: Enable
If necessary, the AF-assist beam will  be emitted by the built-in...