Canon EOS 5D Mk.4 Manual

69
3 Menu Operations
Example: Highlight tone priority
Dimmed menu items cannot be set. The 
menu item is dimmed if another function 
setting is overriding it.
You can see the overriding function by 
selecting the dimmed menu item and 
pressing .
If you cancel the overriding function’s 
setting, the dimmed menu item will 
become settable.
Dimmed Menu Items
  The explanation of menu functions hereafter assumes that you have 
pressed the < M> button to display the menu screen.
  You can also use < 9> to...

70
You can operate the camera by touching the LCD monitor (touch-sensitive panel) with your fingers.
Sample Display (Quick Control)
 Use your finger to tap on (touch 
briefly and then remove your finger 
from) the LCD monitor.
  By tapping, you can select menus, 
icons, etc., displayed on the LCD 
monitor.
  When touch operation is possible, a 
frame will appear around the icon 
(except on menu screens).
For example, when you tap on [ Q], 
the Quick Control screen appears. By 
tapping on [ 2], you can...

71
d Operating the Camera with Touch Screen
Sample Display (Menu screen)
  Slide your finger while touching the 
LCD monitor.
Sample Display (Scale display)
Operations possible by draggi ng your finger on the screen
 Selecting a menu tab or item after pressing the < M> button
  Setting with scale display
  Quick Control
  Selecting AF points
  Playback operations
Drag 

d Operating the Camera with Touch Screen
72
1Select [Touch control].
  Under the [ 52] tab, select [ To u c h  
control ], then press < 0>.
2Set the touch control sensitivity 
setting.
  Select the desired setting, then press 
.
  [Standard ] is the normal setting.
  [Sensitive ] provides a more reactive 
touch screen response than 
[ Standard ]. Try using both settings 
and select the one you prefer.
  To disable touch operations, select 
[Disable ].
3 Touch Control Settings
Cautions for Touch Control...

73
If the card is new or was previously formatted by another camera or 
computer, format the card with this camera.
1Select [Format card].
 Under the [ 51] tab, select [ Format 
card ], then press < 0>.
2Select the card.
  [f ] is the CF card, and [ g] is the SD 
card.
  Select the card, then press < 0>.
3Format the card.
  Select [ OK], then press < 0>.
X The card will be formatted.
  When [ g] is selected, low-level 
formatting is possible (p.74).
For low-level formatting, press the 
< L > button to...

Before You Start
74
 The card is new.
  The card was formatted by a different camera or a computer.
  The card is full of images or data.
  A card-related error is displayed  (p.573).
 Card’s file formats
CF cards up to 128 GB in capacity and SD/SDHC cards will be 
formatted in FAT32. CF cards exceeding 128 GB and SDXC cards 
will be formatted in exFAT.When shooting a movie with a card formatted in exFAT, the movie 
will be recorded in a single file (i nstead of being split into multiple 
files) even if...

75
Before You Start
 If you format a CF card exceeding 128 GB or SDXC card with this 
camera and then insert it into another camera, an error may be displayed 
and the card may become unusable. Certain computer operating 
systems or card readers may not reco gnize a card formatted in exFAT.
  When the card is formatted or data is erased, only the file management 
information is changed. The actual dat a is not completely erased. Be 
aware of this when selling or discarding the card. When discarding the...

Before You Start
76
You can prevent the beeper from sounding when focus is achieved, 
during self-timer shooting, and during touch operations.
1Select [Beep].
 Under the [ z1] tab, select [ Beep], 
then press < 0>.
2Select [Disable].
  Select [ Disable ], then press < 0>.
X The beeper will not sound.
  If [To u c h  t o   ] is selected, the 
beeper will be silent only for touch 
operations.
To save battery power, the camera turns off automatically after a set 
time of idle operation elapses. The default...

77
Before You Start
You can set how long the image is displayed on the LCD monitor 
immediately after shooting. To keep the captured image displayed, set 
[Hold ]. To not have the captured image displayed, set [ Off].
1Select [Image review].
 Under the [ z1] tab, select [ Image 
review ], then press < 0>.
2Set the desired time.
  Select the desired setting, then press 
.
The camera’s shooting function  settings and menu settings can be 
reverted to their defaults.
1Select [Clear all camera settings]....

Before You Start
78
Shooting Function Settings AFAF operationOne-Shot AFCase 1 - 6Case1/Parameter 
settings of all 
cases clearedAF area selection 
modeSingle-point AF 
(Manual selection)
AF point selectionCenterAI Servo 1st image 
priorityEqual priorityRegistered AF pointCanceled
Metering modeq (Evaluative 
metering)AI Servo 2nd image 
priorityEqual priority
ISO speed settingsLens electronic MFEnable after 
One-Shot AF
ISO speedAutomatic setting 
(Auto)AF-assist beam 
firingEnableRange for...