Canon EOS 5D Mk.4 Manual

159
When Autofocus Fails
1Set the lens’s focus mode switch 
to .
X will be displayed on the 
LCD panel.
2Focus on the subject.
  Focus by turning the lens focusing 
ring until the subject looks sharp in 
the viewfinder.
MF: Manual Focus
Focusing ring
  If you manually focus while pressing the shutter button halfway, the focus 
indicator < o> will light up when focus is achieved.
  With Automatic selection AF, when t he center AF point achieves focus, 
the focus indicator < o> will light up. 

160
Single and continuous drive modes are provided. You can select the drive mode suiting the scene or subject.
1Press the  button (9 ).
2Select the drive mode.
 While looking at the LCD panel or in 
the viewfinder, turn the < 5> dial.
u : Single shooting
When you press the shutter button completely, only one shot will be taken.
o ():  High-speed continuous shooting
While you hold down the shutter button completely, you can shoot 
continuously at 
approx. 7.0 shots/sec. maximum.
However, the maximum...

161
i Selecting the Drive Mode
 With the Digital Lens Optimizer set:
When [Digital Lens Optimizer] is set to [Enable], the 
continuous shooting sp eed will greatly decrease.
The maximum continuous shooting speed will vary depending on 
the shooting conditions. For details, see page 162.
i:Low-speed continuous shooting
While you hold down the shutter button completely, you can shoot 
continuously at 
approx. 3.0 shots/sec. maximum.
During Live View shooting, if [AF operation] is set to [Servo AF],...

i Selecting the Drive Mode
162
  The approx. 7.0 shots/sec. maximu m high-speed continuous shooting 
speed < o> (p.160) is achieved under the following conditions: Fully 
charged battery pack, 1/500 sec. or faster shutter speed, maximum 
aperture (varies depending on the lens)*, at room temperature (23°C / 
73°F), flicker reduction disabled, Dual Pixel RAW shooting disabled, Live 
View shooting with One Shot AF and Silent LV shooting both disabled, 
and Digital Lens Optimizer disabled.
* With the AF...

163
Use the self-timer when you want to be in the picture such as a commemorative photograph.
1Press the  button (9 ).
2Select the self-timer.
 While looking at the LCD panel or in 
the viewfinder, turn the < 5> dial.
Q : Shoot in approx. 10 sec.
k : Shoot in approx. 2 sec.
3Take the picture.
  Look through the viewfinder, focus on 
the subject, then press the shutter 
button completely.
X You can check the self-timer 
operation with the self-timer lamp, 
beeper, and countdown display (in 
seconds) on...

164
MEMO 

165
4
Image Settings
This chapter explains image-related function settings: 
Image-recording quality, Dual Pixel RAW function, ISO 
speed, Picture Style, white balance, Auto Lighting 
Optimizer, noise reduction, highlight tone priority, lens 
aberration correction, anti-flicker shooting, and other 
functions.
  A M  icon at the upper right of a page title indicates a 
function that can be used only in the following modes: < d> 
< s >   < F>. 

166
If either a CF card or SD card is already inserted in the camera, you 
can start recording captured images. When only one card is 
inserted, you do not have to follow the procedures described on 
pages 166-168.If you insert both cards, you can select the recording method and select 
which card to use for recording and playing back images.
[f ] indicates the CF card, and [ g] the SD card.
1Select [Record func+card/folder 
sel.].
  Under the [ 51] tab, select [ Record 
func+card/folder sel. ], then...

167
3 Selecting the Card for Recording and Playback
 Standard
Images will be recorded to the card selected with [ Record/play].
  Auto switch card
Same as with the [ Standard] setting, but if the card becomes full, 
the camera will automatically switch to the other card to record 
images. When the card is automatically switched, a new folder will 
be created.
  Rec. separately
You can set the image-recording quality for each card (p.169). Each 
image is recorded to both the CF and SD cards at the...

3 Selecting the Card for Recording and Playback
168
If [Record func. ] is set to [Standard] or [Auto switch card ], select the 
card for recording and playing back images.
If [ Record func. ] is set to [Rec. separately ] or [Rec. to multiple ], 
select the card for playing back images.
Standard / Auto switch card
Select [Record/play].
 Select [ Record/play ], then press 
< 0 >.
f : Record images to and play back 
images from the CF card.
g: Record images to and play back images from the SD card....