Canon Elura 70, 65, 60 Instruction Manual

131

Transferring Images
E

Direct Transfer 
You can transfer images to the computer with the  (print/share) button.
Preparations
The first time you connect the camcorder to the computer, you need to install the
software and set the auto-launch setting.
1. Install the supplied Digital Video Software.
SeeInstalling the Software in the Digital Video Software Instruction Manual .
2. Connect the camcorder to the computer using the USB cable.
SeeConnecting the Camcorder to a Computer in the Digital Video...

132
Transferring All Images, New Images or Images with Transfer Orders
To transfer images with transfer order, you need to set the transfer orders ( 134).
1. Turn the SET dial to select [ ALL IMAGES], [ NEW IMAGES] or [ TRANSFER ORDERS]. 
2. Press the  button.
• The images are transferred to the computer and displayed in the Main Window of ZoomBrowser EX.
• The camcorder displays the transfer menu when transfer is complete. 
Transferring a Selected Image
1. Turn the SET dial to select [ SELECT &...

133
Transferring Images
E
❍You can press the SET dial in place of the  button. With [ ALL
IMAGES], [ NEW IMAGES] or [ TRANSFER ORDERS], a confirmation
message appears. Turn the SET dial to select [OK] and press the SET dial.
❍ To cancel transfer, turn the SET dial to select [CANCEL] and press the SET dial,
or press the MENU button.
❍ Only still images in JPEG format and movies in Motion JPEG format can be\
transferred.
❍ When printing with the  button, the camcorder retains the transfer
setting even if...

134
Selecting Images for Transfer 
(Transfer Order)
You can select images for transfer to the computer. These transfer settings are
compatible with the Digital Print Order Format (DPOF) standards. A max\
imum of 200
images can be selected.
1. Select the image you wish to transfer.
2. Press the SET dial to open the FILE OPER. menu.
3. Select [ TRANS.ORDER] and press the SET dial.
• “ ” appears on the image.
• To cancel the transfer order, press the SET dial again.
4. Select [[RETURN] to close the menu....

135

Additional
Information
E

About the NETWORK Mode
The NETWORK mode is for use with DV Messenger version 2 (Windows XP onl\
y). 
Set the camcorder to NETWORK mode and connect it to the computer using a\
 DV
(IEEE1394) cable.
For details on DV Messenger version 2, refer to the  DV Network Software Instruction
Manual .
Connection
1. Install DV Messenger.
2. Connect the power adapter to the camcorder.
3. Press the small button below the POWER switch and
turn the POWER switch to NETWORK.
4. Connect the...

136

Screen Displays
Hiding the Displays on the LCD Screen
You can hide the displays on the LCD screen to have a clear screen for pl\
ayback.
Open the menu and select [DISPLAY SETUP/ ]. Select [DISPLAYS], set it to
[OFF ] and close the menu.
• Warning messages still appear, and the data code appears if turned on.
• Tape operation displays appear for 2 seconds.
• Displays cannot be hidden on the index screen. 
Hiding/Showing the Displays on the TV Screen
When you connect a TV for recording, you can...

137
Additional
Information
E
PLAY (VCR) Mode
Screen Displays during Recording/Playback

Time code Tape operation
Remaining tape
Remaining battery 
charge (    27)
Remote sensor mode 
(    77) Condensation
warning (    144)
Recording mode (    59)
Headphones (    61)
Wind screen (    60)
16:9 mode (    78) Remaining card capacity 
for still images (    97) Audio mode (    60)
Recording reminder (    27)/
Self-timer countdown (    58)
Backup battery (    17)
Zoom (    29)
Skin detail (    50)
Self-timer (...

138
CARD CAMERA Mode

Still image quality (    93)
Movie size (    94)
Still image size (    93) Remaining card capacity 
for still images (    99)
Stitch assist (    106) Drive mode (    104)
Remaining card capacity 
for movies (    102) 
Focusing frame 
 (    103)
Camcorder shake warning 
(    57) 

CARD PLAY Mode

Length of the movie 
Lap time 
Current image/
total images File number (    95)
Slide show (    109)
Data code (    70)
Protect mark (    111)  

139

Additional
Information
E

Message Explanation
Memory card not is inserted into the camcorder.
SD Memory Card is set for erasure prevention. Replace the 
card or change the position of the protect switch.
No images are recorded on the memory card.
A memory card error occurred. The camcorder cannot record 
or play back the image.
The error may be temporary. If the message disappears after 
4 seconds and     flashes red, turn the camcorder off, remove 
the card and reinsert the card. If      changes...

140

Message ExplanationImage is recorded in a not compatible JPEG format or 
another format not compatible with the camcorder, or the 
image file is corrupted.
You attempted to set more than 200 transfer orders.
You attempted to transfer a movie file as wallpaper.
Some analog images cannot be recorded on the memory 
card depending on the signal.
You attempted to use an image recorded with another 
camcorder, recorded in a format not compatible with this 
camcorder, or that has been edited on a...