Canon Digital Ixus I5 User Guide

							99
Playback
Attaching Sound Memos to Images
In playback mode (including single image playback, index playback, and 
magnifying playback), you can attach sound memos (up to 60 seconds) to 
an image. The sound data is saved in the WAVE format.
Exiting Sound Memos
Press the MENU button until you return to the playback screen.
1In the   (Play) menu, select   
and press the SET button.
See Selecting Menus and Settings (p. 45).
2Use the   or   button to select an 
image and press the SET button.
The sound memo control panel will display.
3Use the   or   button to select 
 (Record) and press the SET 
button to record.
 The recording starts and the elapsed time 
is displayed. 
 Press the SET button again to stop 
recording. To resume recording, press the 
SET button again.
 Up to 60 seconds of recordings may be 
added to any one image.
 To return to the previous screen, select 
 (Exit) and press the SET button.
Sound Memo Panel
 
						

							100Playing/Erasing Sound Memos
1Display an image with a sound 
memo attached (p. 99) and press 
the SET button.
 Images with sound memos attached have 
the     icons displayed on them.
 The sound memo control panel will 
display.
2Use the   or   button to select 
 (Play) or   (Erase) and press 
the SET button.
 (Play)
 The sound memo will play. Playback will 
stop when you press the SET button. 
Press the SET button again to resume 
playback.
 Use the   or   button to adjust the 
sound volume.
 (Erase)
A confirmation menu will display. Use the 
 or   button to select [Erase] and press 
the SET button.
To return the playback to the beginning, 
select   (Pause) while stopped and press 
the SET button.
Sound Memo Panel
 
						

							101
Playback
 You cannot attach sound memos to movies.
 The “Memory card full” message will display when the SD card is full 
and you will be unable to record sound memos to that card.
 If an incompatible sound memo is attached to an image, you will be 
unable to record or play sound memos for that image, and the 
“Incompatible WAVE format” message will display. You can erase 
incompatible sound data using the camera.
 Sound memos for protected images cannot be erased.
The volume can be adjusted in the   (Set up) menu (p. 51).
 
						

							102
Auto Play
Use this feature to automatically playback all of the images in the SD card. 
The LCD monitor displays each image for approximately 3 seconds.  
Pausing/Resuming Auto Play
Stopping Auto Play
 The display interval may vary for some images.
 Movie images play for the length of time that they were recorded.
 The power saving function is disabled during Auto Play (p. 33). 
1In the   (Play) menu, select   
and press the SET button.
See Selecting Menus and Settings (p. 45).
 Once you have selected it, Auto Play 
starts.
 As with the single image playback mode, 
pressing the   or   button during auto 
play will advance through the images 
more rapidly.
Press the SET button.
Auto Play pauses. Press the SET button 
again to restart it.
Press the MENU button.
Auto Play stops.
 
						

							103
Playback
Protecting Images
You can protect important images from accidental erasure.
To Cancel Protection
After step 1, select an image to remove protection from and press the SET 
button.
Please note that formatting (initializing) an SD card erases all data, 
including protected images (p. 24).
1In the   (Play) menu, select   
and press the SET button.
See Selecting Menus and Settings (p. 45).
2Use the   or   button to select an 
image to protect and press the SET 
button.
 The  icon appears on protected images.
 You can make the selection of images 
easier by toggling between single image 
playback and index playback by holding 
down the SET button.
3Press the MENU button.
The Play menu displays again. Press it again 
to return to the playback screen.
Protection Icon
 
						

							104
Erasing
Erasing Single Images
 Please note that erased images cannot be recovered. Exercise 
adequate caution before erasing a file.
 Protected images cannot be erased with this function.
1Use the   or   button to select an 
image for deletion and press the 
 button.
2Use the   or   button to select 
[Erase] and press the SET button.
To exit instead of erasing, select [Cancel].
 
						

							105
Erasing
Erasing All Images
You can erase all the images saved on the SD card.
 Please note that erased images cannot be recovered. Exercise 
adequate caution before erasing a file.
 Protected images cannot be erased with this function.
You should format the SD card when you want to erase not only image 
data but also all the data contained on the card (p. 24).
1In the   (Play) menu, select   
and press the SET button.
See Selecting Menus and Settings (p. 45).
2Use the   or   button to select 
[OK] and press the SET button.
To exit instead of erasing, select [Cancel].
 
						

							106
Print Settings
Images shot with this camera can be printed using one of the following methods.-Connecting the camera to a direct print compatible printer*1 with a single cable 
and pressing the   button on the camera.
-Selecting images and specifying the number of print copies (DPOF*2 print 
settings) with the camera before sending the images (SD card) to a photo 
developing center
*1Since this camera uses a standard protocol (PictBridge), you can use it with 
other PictBridge-compliant printers in addition to Canon-brand compact 
photo printers (SELPHY CP series), card photo printers and Bubble Jet 
Printers (PIXMA series/SELPHY DS series).
*2Digital Print Order Format 
About Printing
Bubble Jet Printer  Card Photo 
Printer
Photo LabPrint
SD CardDirect Print Compatible Printer
Compact Photo 
Printer
 
						

							107
Print Settings
     
This guide explains DPOF print settings. For information on how to print 
images, refer to the Direct Print User Guide supplied with the camera. 
Also, refer to your printer’s manual.
Please check the System Map to confirm the compact photo printer (SELPHY 
CP series), card photo printer models and Bubble Jet Printers (PIXMA series/
SELPHY DS series) that can be used with this camera.
zConnect the camera to the printerzSet various print settings (except DPOF print settings)zPrint
For details, see the Direct Print User Guide.
Direct Print Compatible Printing
zSee Selecting Images for Printing (p. 108).
    T
zSet the number of print copies (p. 109)
    T
zSee Setting the Print Style (p. 112).
 Standard/Index/Both
 Date: On/Off
 File Numbers: On/Off
For details, see the Direct Print User Guide. 
zSelect the images to download to a computer (p. 114)
DPOF Print Settings
DPOF Transfer Order
 
						

							108
Setting the DPOF Print Settings
You can select images on an SD card for printing and specify the number of 
print copies in advance using the camera. This is extremely convenient for 
sending the images to a photo developing service that supports DPOF, or for 
printing on a direct print compatible printer. 
See the Direct Print User Guide for instructions on how to print.
Selecting Images for Printing
There are two ways to select images.
 Singly
 All images on an SD card (the number of print copies is set to one per 
image)
Single Images
1In the   (Play) menu, select   
and press the SET button.
See Selecting Menus and Settings (p. 45).
2Use the  ,  ,   or   button to 
select [Order] and press the SET 
button.
To cancel the Print Order settings, select 
[Reset].