Canon Digital IXUS 30 User Manual

119
Erasing
Erasing
Erasing Single Images
 Please note that erased images cannot be recovered. Exercise 
adequate caution before erasing a file.
 Protected images cannot be erased with this function.
1Use the   or   button to select an 
image for deletion and press the 
 button.
2Use the   or   button to select 
[Erase] and press the FUNC./SET 
button.
To exit instead of erasing, select [Cancel].
 

120
Erasing All Images
You can erase all the images saved on the SD card.
 Please note that erased images cannot be recovered. Exercise 
adequate caution before erasing a file.
 Protected images cannot be erased with this function.
You should format the SD card when you want to erase not only image 
data but also all the data contained on the card (p. 28).
1In the   (Play) menu, select   
and press the FUNC./SET button.
See Selecting Menus and Settings (p. 49).
2Use the   or   button to select 
[OK]...

121
 

122
Print Settings
Images shot with this camera can be printed using one of the following methods.-Connecting the camera to a direct print compatible printer*1 with a single cable 
and pressing the   button on the camera.
-Selecting images and specifying the number of print copies (DPOF*2 print 
settings) with the camera before sending the images (SD card) to a photo 
developing center
*1Since this camera uses a standard protocol (PictBridge), you can use it with 
other PictBridge-compliant printers in...

123
Print Settings
     
This guide explains DPOF print settings. For information on how to print 
images, refer to the Direct Print User Guide supplied with the camera. 
Also, refer to your printer’s manual.
Please check the System Map to confirm the compact photo printer (SELPHY 
CP series), card photo printer models and Bubble Jet Printers (PIXMA series/
SELPHY DS series) that can be used with this camera.
zConnect the camera to the printerzSet various print settings (except DPOF print...

124
Setting the DPOF Print Settings
You can select images on an SD card for printing and specify the number of 
print copies in advance using the camera. This is extremely convenient for 
sending the images to a photo developing service that supports DPOF, or for 
printing on a direct print compatible printer. 
See the Direct Print User Guide for instructions on how to print.
Selecting Images for Printing
There are two ways to select images.
 Singly
 All images on an SD card (the number of print copies...

125
Print Settings
3Select images for printing.
As shown below, selection methods differ 
according to the options chosen for the   
(Print Type) settings (p. 128).
 (Print Type)
  (Standard)/  (Both)
Use the   or   button to select an image 
and the   or   button to select the 
number of print copies (up to maximum of 
99).

  (Index)
Use the   or   button to move to an 
image and the   or   button to select or 
deselect it.
A checkmark displays on selected images.
You can press the zoom lever toward...

126
All the Images on an SD Card
1In the   (Play) menu, select   
and press the FUNC./SET button.
See Selecting Menus and Settings (p. 49).
2Use the   or   button to select 
[Order] and press the FUNC./SET 
button.
To cancel the DPOF print settings, select 
[Reset].
3Press the zoom lever toward  .
The display switches to index playback (3 
images).
4Press the FUNC./SET button.
 

127
Print Settings
 The   symbol will display on images that have had print settings 
set by other DPOF-compliant cameras. These settings will be 
overwritten by those set by your camera.
 The output of some printers or photo developing services may not 
reflect the specified print settings.
 Print settings cannot be set for movie images.
 Images are printed in order from oldest to newest by the shooting 
date.
 A maximum of 998 images can be selected per SD card.
 When [Both] is selected, the...