Canon Digital IXUS 230 HS User Manual

							Adding Effects and Shooting
71
Specify the range of colors to be 
swapped.
zPress the op buttons to adjust the range 
of colors to be swapped.
zChoose a negative value to limit the range 
of colors. Choose a positive value to 
extend the range of colors to similar colors.
zPress the m  button to complete the 
setting and restore the shooting screen.
• Using the flash may cause unexp ected results in this mode.
• Depending on shooting conditions, the image may become coarse, or the 
colors may not come out as expected.
 
						

							72
You can make a short movie of a day just by taking still images.
Each time you take a picture, the scene just before taking your shot will be 
recorded as a movie. All the movies recorded that day will be saved as a 
single file.
Choose .
zFollow Steps 1 – 2 on p. 62 to choose  .
Shoot.
zPress the shutter button fully to shoot a still 
image.
XA movie of approx. 2 – 4 sec. will be 
recorded just before the image is taken.
Making Short Movies Automatically 
(Movie Digest)
What if a movie is not recorded?
If you take a picture just after turning on the camera, selecting   mode or 
otherwise operating the camera, a movie may not be recorded.
Viewing movies made with Movie Digest mode
You can select movies made in   mode by date for viewing (p. 115).
•Since you are also shooting movies  when you shoot still images, the 
battery will be depleted more quickly than in  A mode.
• The image quality will be fixed at   for movies made in   mode.
• In the following cases, movies will be saved as separate files even if they 
were made on the same day with   mode.
-If the clip file size reaches 4 GB or the recording time reaches approximately 
1 hour
- If the movie is protected (p. 124)
- If the Time Zone setting is changed (p. 164)
- If a new folder is created (p. 162)
• If you operate the camera while shooting a movie, the sounds made will 
be recorded in the movie.
• The camera will not play sounds, such as when pressing the shutter 
button halfway, using the controls or the self-timer (p. 158).
 
						

							73
The camera will shoot, even without pressing the shutter button, when it 
detects a smile.
Choose .
zFollow Steps 1 – 2 on p. 62 to choose  , 
then press the p button.
zPress the  qr buttons to choose  , then 
press the  m button.
XThe camera will enter shooting stand-by, 
and [Smile Detection on] will appear on the 
screen.
Point the camera at a person.
zEach time the camera detects a smile it will 
shoot after the lamp lights.
zPress the q  button to pause smile 
detection. Press the  q button again to 
resume smile detection.
Detecting a Face and Shooting 
(Smart Shutter)
Detecting a Smile and Shooting
What if a smile is not detected?
Smiles are easier to detect if the subject faces the camera, and opens their mouth 
enough to show some teeth when smiling.
Changing the number of shots
After choosing   in Step 1, press the  op buttons.
•You should switch to another mode when you finish shooting, or the 
camera will continue taking shots each time the camera detects a smile.
• You can also shoot by pressing the shutter button.