Canon Digital Ixus 220 Hs User Guide

Changing Camera Settings
171
Setting the Screen Shut-Off Time
You can adjust the time the screen takes to shut off automatically (p. 52). This 
also works when [Auto Power Down] is set to [Off].
zChoose [Power Saving], then press the m 
button.
zPress the op buttons to choose [Display 
Off], then use the qr buttons to choose a 
time.
zIn order to save battery power, you should 
choose less than [1 min.].
Using the World Clock
When traveling abroad, you can record images with local dates and times 
simply...

Changing Camera Settings
172
Set the world time zone.
zPress the op buttons to choose 
[ World], then press the m button.
zPress the qr buttons to choose the world 
time zone.
zYou can also set the daylight saving time 
as in Step 1.
zPress the m button.
Choose the world time zone.
zPress the op buttons to choose 
[ World], then press the n button.
X will appear on the shooting screen 
(p. 186).
If you change the date or time in the   setting (p. 19), your [ Home] 
time and date will automatically change.
 

173
If you set the mode switch to 4, and the mode to G, you can change the 
settings in the 4 tab (p. 47).
Turning Off the AF Assist Beam
The lamp will automatically light to assist focusing in low light conditions when 
you press the shutter button halfway. You can turn off the lamp.
zChoose [AF-assist Beam], then press the 
qr buttons to choose [Off].
Turning Off the Red-Eye Reduction Function
The red-eye reduction lamp lights in order to reduce the red-eye effect that 
occurs when shooting in dark...

Changing Shooting Function Settings
174
Changing the Image Display Time Right After 
Shooting
You can change the length of time the images display right after shooting.
zChoose [Review], then press the qr 
buttons to choose an option.
Changing the Way the Image Displays Right After 
Shooting
You can change the way the image displays right after shooting.
zChoose [Review Info], then press the qr 
buttons to choose an option.
Displaying Grid Lines
You can display grid lines on the screen for vertical and...

Changing Shooting Function Settings
175
Changing the IS-Mode Settings
zChoose [IS Mode], then press the qr 
buttons to choose an option.
Grid lines will not be recorded on the image.
ContinuousImage stabilization is always on. 
You can confirm the effects 
directly on the display, which 
makes it easier to check the 
composition or focus.
When shooting movies, the 
camera also reduces strong 
camera shake, for example when 
walking (Dynamic mode).
Shoot Only*Image stabilization is only active 
at the...

176
You can adjust the settings in the 1 tab by pressing the 1 button (p. 47).
Choosing the Image that First Displays in 
Playback
zChoose [Resume], then press the qr 
buttons to choose an option.
Turning Off the Auto Rotate Function
When you play back images on the camera, images shot in vertical 
orientation automatically rotate and display vertically. You can turn off this 
function.
zSelect [Auto Rotate], then press the qr 
buttons to select [Off].
Changing Playback Function Settings
Last seenResumes...

177
Useful Information
This chapter introduces how to use the AC adapter kit and Eye-Fi card 
(both sold separately), troubleshooting tips, and contains lists of 
functions and items that appear on the screen.
10
 

178
If you use AC Adapter Kit ACK-DC60 (sold separately), you can use the 
camera without worrying about how much charge is left in the battery.
Turn off the camera.
Insert the coupler.
zFollow Step 2 on p. 16 to open the cover, 
then insert the coupler as shown until it 
locks into place with a click.
zFollow Step 5 on p. 17 to close the cover.
Plug the cord into the coupler.
zOpen the cover and fully insert the plug 
into the coupler.
Connect the power cord.
zConnect the power cord to the compact...

179
Before using an Eye-Fi card, be sure to check whether Eye-Fi card use is 
authorized in the country or territory of use (p. 16).
When you put a prepared Eye-Fi card into the camera, you can automatically 
transfer your images wirelessly to a computer, or upload them to a web 
service.
Image transfer is a function of the Eye-Fi card. For details on how to setup 
and use the card, and concerning problems transferring images, please refer 
to the Eye-Fi card user guide, or contact the manufacturer.
If...

Using an Eye-Fi Card
180
Checking Connection Information
You can check the Eye-Fi card’s access point SSID, or connection status.
Choose [Connection info].
zPress the n button to choose [Eye-Fi 
Settings] from the 3 tab, then press the 
m button.
zPress the op buttons to choose 
[Connection info], then press the m 
button.
XThe connection info screen will appear.
Disabling Eye-Fi Transfer
You can set the card to disable Eye-Fi transfer.
Choose [Disable] in [Eye-Fi trans.].
zPress the n button to choose...