Canon Cp 330 User Guide

							51
Correction :Replace the ink cassette with a new one.
Correction :Insert the ink cassette into the printer.
Correction :Make sure the indicator light on the printer is green. (➡ p.28)
Correction :Check the USB cable to make sure it is connected correctly. (➡ p.29)
Correction :Insert the paper cassette into the printer.
Correction :Replace the paper with the correct size.
Ink cassette is empty and must be replaced.
Press [Resume] to resume, or [Cancel] to stop.
Cause : There is no more ink in the ink cassette.
Ink cassette not installed.
You must insert an ink cassette before printing.
Press [Resume] to resume, or [Cancel] to stop.
Cause : The ink cassette is not inserted into the printer.
The printer is not ready for printing.
Check the printer power and printer connections.
Cause : No power is supplied to the printer.
Cause : The USB cable is not connected correctly.
No Paper Cassette has been found.
Insert an appropriate one.
Press [Resume] to resume, or [Cancel] to stop.
Cause : The paper cassette is not inserted.
Wrong type of paper.
Replace with the right type.
Press [Resume] to resume, or [Cancel] to stop.
Cause : The paper is not suitable for the print settings.
 
						

							52
Correction :Insert the correct paper cassette.
Correction :Insert the correct ink cassette.
Correction :Insert the correct ink cassette and paper.
Correction :Use a new or fully charged battery pack, or use the printer with the 
AC adapter (compact power adapter) connected.
The paper cassette differs from the setup.
Please check the paper cassette.
Press [Resume] to resume, or [Cancel] to stop.
Cause : The paper cassette in the printer is not suitable for the print 
settings.
The specified Ink Cassette cannot be found.
Replace the Ink Cassette with the specified one.
Press [Resume] to resume, or [Cancel] to stop.
Cause : The ink cassette in the printer is not suitable for the print 
settings.
The specified Ink Cassette and Paper cannot be found.
Replace the Ink Cassette and Paper with the specified one.
Press [Resume] to resume, or [Cancel] to stop.
Cause : The ink cassette and paper in the printer are not suitable for the 
print settings.
The battery capacity of the printer is insufficient.
Please connect AC adapter and press [Resume] to resume, or click 
[Cancel] to stop printing and replace the battery.
Cause : The printer’s battery charge is running low. The printer will not 
work.
 
						

							53
Errors where printing is canceled
If any of the following messages appear, printing is canceled. After using the 
recommended solution to clear the error, you need to start the print job over 
again.
Correction :After closing the dialog, turn the printer off and then back on again. 
Paper is automatically ejected from the print receptacle or the paper 
handling slot. Remove the paper and then turn the printer off and 
back on again a second time, and start the print job over.
Correction :Take out the ink cassette from the printer. Remove any slack from the 
ink sheet and then insert the ink cassette back into the printer. If the 
problem still continues, replace the ink cassette with a new one.
Paper jammed in printer.
Clear the jam as follows, then try printing again.
1. Remove the paper that caused the error.
2. Turn printer off and back on.
Cause : Paper is jammed inside the printer while printing, or there is 
paper still inside the printer before printing starts.
Problem with ink cassette.
Correct as follows, then try printing again.
1. Check the state of the ink cassette.
2. Turn printer off and back on.
3. Remove the paper that caused the error.
Cause : There is a problem with the ink cassette.
 
						

							54
Correction :Make sure the indicator light on the printer is green. (➡ p.28)
Correction :Check to make sure the USB cable is connected correctly. (➡ p.29)
Correction :Turn the printer’s power off and back on again. Start the print job over.
Correction :Remove paper from the paper cassette, and then make sure to load 
the correct amount of paper in the paper cassette.
For messages caused by errors related to the operating environment of your 
computer, follow the messages on the screen.
Error occurred during communication.
Check the printer power and printer connections.
Cause : Power to the printer goes off while printing is in progress.
Cause : The cable came loose or was disconnected while printing was in 
progress.
If the USB cable is not properly connected, communication problems may 
occur. Make sure that the printer is connected to your computer’s root hub 
port with suitable USB cable, and then try printing again.
Problem with the printer.
Turn printer off and back on.
Cause : The printer unit was not initialized successfully.
Cause : There is too much paper in the paper cassette.
CDP-E031© 2004 CANON INC.