Canon Cp 330 User Guide

21
Windows XP
1Close any programs that are running.
2Place the Canon CP Printer Solution Disk in the CD-ROM drive.
When the installer panel appears, click [Exit] to close it.
3Turn the printer on. (➡ p.28)
4Connect the printer to your computer, using the USB cable. 
(➡ p.29)
After a moment, the Found New Hardware Wizard dialog appears.
5Select “Install the software automatically (Recommended)”, and 
then click the [Next] button.
Log on to Windows XP with administrator privileges before installing the...

22
6In the list of printer drivers, select [Canon CP-330] so that 
[\CP_DRV\7ENGLISH\WIN2K\CP330\CNY3302k.INF] appears in 
[Location], then click the [Next] button.
For the CP-220, select [Canon CP-220] so that 
[\CP_DRV\7ENGLISH\WIN2K\CP220\CNY2202k.INF] appears.
The printer driver is installed.
7When the following message appears, click the [Finish] button.
 

23
If you have problems with the printer driver installation (for example, the 
printer driver’s installation program stops during the installation), the USB 
driver may not be installed correctly.
1When the Add New Hardware Wizard dialog appears, click the 
[Cancel] button to cancel the installation.
2Make sure power is supplied to the printer (its indicator light is 
green), and that the printer is connected to your computer with the 
USB cable.
3Click the [Start] button and select [Settings], and...

24
5Click the [Device Manager] tab.
6Following the examples shown below, select [Canon CP-330] or 
[Canon CP-220] under [Universal Serial Bus controllers] or [Other 
devices], and then click the [Remove] button.
Example 1:
Use the following screen examples as a reference and make sure you 
select the correct device for deletion. If you delete other devices, 
Windows may become inoperable.
 

25
Example 2:
7When the confirmation message appears, click the [OK] button.
8Click the [OK] button to close the System Properties dialog.
9Close the Control Panel window.
10Disconnect the USB cable from your computer.
11Restart your computer.
12Reinstall the Printer Driver.
 

26
This section describes the procedure for uninstalling the software.
You must uninstall the software as outlined in the following procedure.
Using any other procedure to uninstall the software may lead to problems 
when you attempt to reinstall it.
1Turn off your computer.
2Disconnect the USB cable from your computer and make sure that 
the printer is not connected to your computer.
3Start your computer.
With Windows 2000 or Windows XP, be sure to log on with Administrator 
privileges. 
Close any...

27
8From the list of printers available for deletion, select 
[Canon CP-330] and then click the [Delete] button.
If you are using the CP-220, select [Canon CP-220].
9When the confirmation message appears, check the printer name 
and then click the [Yes] button.
The printer driver is deleted, and the CP Printer Driver Uninstaller window 
reappears.
10Click the [Exit] button.
11Restart your computer.
For Windows 98 or Windows Me
If [Canon CP-330] or [Canon CP-220] does not appear, it was probably 
not...

28
Turning On the Printer
Refer to the above figure during the following procedure (the numbers in the 
figure correspond to the steps in the procedure).
1Place the printer on a flat surface.
When printing, the paper temporarily projects out from the rear, so allow a clear 
space of at least 15 cm (6 inches) in the back.
2Connect the supplied power cord to the CA-CP100 Compact Power 
Adapter (also supplied).
3Plug the power cord into a power outlet.
4Connect the Compact Power Adapter cable to the printer....

29
Connecting the Printer to Your 
Computer
Notes about connection
•Using the USB cable, be sure to connect the printer directly to your computer. If 
you connect it via a USB hub, the printer may not function properly.
•Do not use the printer together with other USB devices (except a USB mouse or 
keyboard); otherwise the printer may not function properly. If this happens, 
disconnect the other USB devices from your computer and then reconnect the 
printer.
•Do not connect two or more direct print...

30
1Connect one end of the USB cable to the USB port on the printer, 
and the other end to a USB port on your computer.
•There is no need to turn off the printer or your computer.
•When connecting the printer to your computer, make sure the connectors on 
the ends of the USB cable match the ports on the printer and your computer.
•For the location and direction of your computer’s USB port, refer to the 
documentation provided with your computer.
2The first time the printer is connected to your computer,...