Canon Color Imageclass Lbp7110cw Quick Start Guide

							Quick Setup Guide
FT6-0786   (020) XXXXXXXXXX Copyright CANON INC. 2014  PRINTED IN CHINA
1
22
1
OFF
3
 SPA  Lea esta guía primero.
    Por favor, lea esta guía antes de usar este producto.
    Después de leer esta guía, guárdela en un lugar seguro para pos\
teriores consultas.
Read this guide first.
Please read this guide before operating this product.
After you finish reading this guide, store it in a safe place for future\
 reference.
 SPA Guía de instalación rápida
 SPA Antes de instalar la impresora, lea detenidamente las 
precauciones indicadas a la derecha.
Before installing the printer, read the cautions 
carefully which are described on the right side.
  SPA  Descargue el manual y el controlador de impresora  más recientes del sitio web de Canon.
Download the latest manual and printer driver from 
the Canon Web site.
Important Safety Instructions
SymbolsInstallation
Indicates a warning concerning operations that may lead to 
death or injury to persons if not performed correctly. To use the 
machine safely, always pay attention to these warnings.
Indicates a caution concerning operations that may lead to injury 
to persons if not performed correctly. To use the machine safely, 
always pay attention to these cautions.
-  Do not install the printer in a location near alcohol, paint thinner, or other 
flammable substances. If flammable substances come into contact with 
electrical parts inside the printer, this may result in a fire or electrical 
shock.
-  Do not place the following items on the printer. -  Necklaces and other metal objects
-  Cups, vases, flowerpots, and other containers filled with water or liquids
If these items come into contact with a high-voltage area inside the 
printer, this may result in a fire or electrical shock.
If these items are dropped or spilled inside the printer, immediately turn 
OFF the power switch (1) and disconnect the interface cables if they a\
re 
connected (2). Then, unplug the power plug from the AC power outlet (3) 
and contact your local authorized Canon dealer.
Power Supply
-  Do not damage or modify the power cord. Also, do not place heavy  objects on the power cord or pull on or excessively bend it, as this can\
 
cause electrical damage, resulting in fire or electrical shock.
-  Keep the power cord away from all heat sources. Failure to do so can  cause the power cord insulation to melt, resulting in a fire or electric\
al 
shock.
-  The power cord should not be taut, as this may lead to a loose  connection and cause overheating, which could result in a fire.
-  The power cord may become damaged if it is stepped on, fixed with  staples, or if heavy objects are placed on it. Continued use of a 
damaged power cord can lead to an accident, such as a fire or electrical\
 
shock.
-  Do not plug or unplug the power plug with wet hands, as this can result \
 in electrical shock.
-  Do not plug the power cord into a multi-plug power strip, as this can  result in a fire or electrical shock.
-  Do not bundle up or tie up the power cord in a knot, as this can result \
in  a fire or electrical shock.
-  Insert the power plug completely into the AC power outlet. Failure to do  so can result in a fire or electrical shock.
-  If excessive stress is applied to the connection part of the power cord,\
 it  may damage the power cord or the wires inside the machine may 
disconnect. This could result in a fire. Avoid the following situations:
-  Connecting and disconnecting the power cord frequently.
-  Tripping over the power cord.
-  The power cord is bent near the connection part, and continuous stress is being applied to the power outlet or the connection part.
-  Applying a shock to the power connector.
-  Do not use power cords other than the one provided, as this can result i\
n  a fire or electrical shock.
-  As a general rule, do not use extension cords. Using an extension cord  may result in a fire or electrical shock.
-  Do not install the printer in unstable locations, such as on unsteady 
platforms or inclined floors, or in locations subject to excessive 
vibrations, as this may cause the printer to fall or tip over

, resulting in 
personal injury.
-  The ventilation slots are provided for proper ventilation of working par\
ts  inside the printer. Never place the printer on a soft surface, such as a 
bed, sofa, or rug. Blocking the slots can cause the printer to overheat,\
 
resulting in a fire.
-  Do not install the printer in the following locations, as this may resul\
t in a  fire or electrical shock.
- A damp or dusty location
- A location exposed to smoke and steam, such as near a cookery or humidifier
- A location exposed to rain or snow
- A location near a water faucet or water
- A location exposed to direct sunlight
- A location subject to high temperatures
- A location near open flames
-  When installing the printer, gently lower the printer to the installation site  so as not to catch your hands between the printer and the floor or 
between the printer and other equipment, as this may result in personal \
injury.
-  When connecting the interface cable, connect it properly by following th\
e  instructions in the e-Manual. If not connected properly, this may result in 
malfunction or electrical shock.
-  When moving the printer, follow the instructions in the e-Manual to hold it  correctly. Failure to do so may cause you to drop the printer, resulting in 
personal injury. -  Do not use a power supply voltage other than that listed herein, as this\
 
may result in a fire or electrical shock.
- 

Always grasp the power plug when unplugging the power plug. Do not 
pull on the power cord, as this may expose the core wire of the power 
cord or damage the cord insulation, causing electricity to leak, resulti\
ng 
in a fire or electrical shock.
-  Leave sufficient space around the power plug so that it can be  unplugged easily. If objects are placed around the power plug, you may 
be unable to unplug it in an emergency.
To avoid the risk of personal injury or damage to the printer, and for legal 
information, make sure to read the Legal Notices and Impor tant Safety 
Instructions in the e-Manual included on the accompanying CD-ROM 
carefully before using the printer.
English Español
Para evitar el riesgo de lesiones personales o daños al equipo, y a efectos 
de información legal, recuerde leer detenidamente los Avisos legales y las 
Instrucciones de seguridad importantes del e-Manual incluido en el  CD-ROM antes de utilizar la impresora.
ADVERTENCIA
This manual describes only warnings and cautions for the installation an\
d the power 
supply. Be sure to read Important Safety Instructions described in the e-Man\
ual 
(HTML manual) included in the supplied CD-ROM also.
User SoftwareDisplaying the Printer Driver Guide for Macintosh
Double-click [index.html] in the [SFP] - [Documents] - 
[english] - [GUIDE] folder in the supplied CD-ROM.
Displaying the e-Manual
Double-click [index.html] in the [Manuals] - [Source] folder in 
the supplied CD-ROM.
This guide describes how to set up the printer in the Windows 
environment as examples. 

To view how to use printer drivers or 
utilities for Macintosh, see the Printer Driver Guide for Macintosh 
(HTML manual). For handling the printer or maintenance methods 
and so on, see the e-Manual (HTML manual).

 
						

							1
3
2
12
Remove all the tape.
2
8
43
9
51
2
1
67
21
Close the covers and insert the paper drawer after you finish checking.
A
Confirm the supplied accessories.
Remove the packing materials.
Check!
Did you remove all the packing 
materials?
Connect the power cord.
Make sure that all the orange tape is completely removed.Pull out the sealing tapes of all the 
toner cartridges.
  SPA   Verifique los accesorios suministrados.
 SPA   Retire los materiales de embalaje.
 
SPA   Retire la totalidad de la cinta.
 SPA   ¿Ha retirado todos los materiales de 
embalaje?
 SPA   Conecte el cable de alimentación.
Remove all the orange tape attached to the printer when performing the f\
ollowing procedure.
The packing materials may be changed in form or placement, or may be add\
ed or removed without notice.
 SPA  Retire la totalidad de la cinta naranja acoplada a la impresora cuando l\
leve a cabo el siguiente procedimiento.
   Los materiales de embalaje pueden diferir en su forma o posición y pu\
eden añadirse o eliminarse sin previo aviso.
 SPA   Tire de las cintas de sellado de todos 
los cartuchos de tóner .
 SPA   Cierre las tapas e inserte la bandeja de papel una vez finalizada la com\
probación.
 SPA  Asegúrese de retirar completamente la totalidad de la cinta naranja.
Setup finished. SPA   Ha finalizado la configuración.
4
5
7
6
C    C    
1
1
23
23
213
45
45
6
1
2
12
Load paper.
Specify the connection settings and install the driver.
Next, see the e-Manual. Specify the paper settings and check the operation.
Restart your computer.
If you have a problem during 
the connection settings, see 
the Useful 
Tips. Longer than A4
Up to here
Follow the instructions on the screen.
 SPA  Cargue papel.
 SPA   Especifique la configuración de la conexión e instale el controlad\
or.
 SPA   Siga las instrucciones de la pantalla.
 SPA  Reinicie el ordenador.
 SPA   Si tiene un problema durante la 
configuración de la conexión, 
consulte los Consejos útiles.
 SPA   Especifique la configuración del papel y compruebe el funcionamiento.\
Setup finished.
 SPA   Ha finalizado la configuración.
 SPA   A continuación, consulte el e-Manual.
* English sample
*  If you are using Macintosh, see the Printer Driver Guide for Macintosh\
 
(HTML manual).
*  If you are using Macintosh, see the Printer Driver Guide for Macintosh\
  (HTML manual).
* If you are using Macintosh, double-click  [index.html] in the [Manuals] - [Source] folder 
in the supplied CD-ROM.
* You can check the operation (      and      ) only when using Windows.\
45
BAC
Para la configuración
de Wi-FiFor Wi-Fi settings
SPA