Canon cinema EOS C300 Mark II User Manual
Here you can view all the pages of manual Canon cinema EOS C300 Mark II User Manual. The Canon manuals for Cinema are available online for free. You can easily download all the documents as PDF.
Page 1
Wireless File Transmitter WFT-E6 Guide for EOS C300 Mark II Users E DIE-0478-000
Page 2
2 You can attach a WFT-E6 Wireless File Transmitter to the Canon Digital Cinema Camera EOS C300 Mark II to connect the camera to a Wi-Fi network and use the camera’s network functions. This guide will explain how to attach the WFT-E6 to the camera and configure the transmitter. For specifications and additional information about the WFT-E6, refer to the Wireless File Transmitter WFT-E6 Instruction Manual. For details about how to use Browser Remote to operate the camera, refer to the camera’s...
Page 3
3 Introduction2 About this Guide ................................................................................................................................ 2 Attaching to the Camera .................................................................................................................... 4 1Network Settings 5 Available Network Functions.............................................................................................................. 6 Connecting to a Wi-Fi Network...
Page 4
4 Turn off the camera before attaching the WFT-E6 Wireless File Transmitter. The transmitter is powered by the camera. Make sure the camera’s battery pack is sufficiently charged before using the transmitter. 1 Turn off the camera. 2 Attach the transmitter. Open the camera’s system extension terminal cover (), align the transmitter’s plug with the system extension terminal as shown in the illustration and firmly push the transmitter in (). Turn the tightening screw in the direction of the arrow...
Page 5
5 1 Network Settings Complete the network settings using the camera’s menu screens.
Page 6
6 After you connect the camera to a network via Wi-Fi (A7), you can use the following network functions. Wi-Fi functions and connection types 1Connection to a Wi-Fi network via an external access point (wireless router, etc.)2Direct connection to one Wi-Fi-enabled device where the camera serves as the Wi-Fi access point. Available Network Functions FunctionDescription Wi-Fi connection Infrastructure1Camera Access Point2 Browser RemoteControl the camera remotely from the Web browser of a connected...
Page 7
7 Before using the network functions, you need to complete the network settings on a camera with the transmitter attached. Once you attach the transmitter to the camera, you can check the current network settings on the status screens (A21) and change them if necessary. The camera can be connected to a Wi-Fi enabled device either through an access point (Infrastructure connection) or directly (Camera Access Point connection). The connection used will depend on the network function you want to use....
Page 8
![Page 8
8
Connecting to a Wi-Fi Network
[Manual]
If the access point you want to use has stealth mode activated and it cannot be automatically
detected by the camera, you can enter all the necessary settings manually. This requires more
advanced knowledge of Wi-Fi and network settings.
Depending on the country/region of use, some restrictions on outdoor use or camera access point
connections may apply when operating the IEEE802.11a/n wireless standard in the 5 GHz band. For
details see Areas of Use and...](http://img.usermanuals.tech/thumb/14/1567/w300_cinema-eos-c300-mark-ii-1478307182_d-7.png "Page 8
8
Connecting to a Wi-Fi Network
[Manual]
If the access point you want to use has stealth mode activated and it cannot be automatically
detected by the camera, you can enter all the necessary settings manually. This requires more
advanced knowledge of Wi-Fi and network settings.
Depending on the country/region of use, some restrictions on outdoor use or camera access point
connections may apply when operating the IEEE802.11a/n wireless standard in the 5 GHz band. For
details see Areas of Use and...")
8 Connecting to a Wi-Fi Network [Manual] If the access point you want to use has stealth mode activated and it cannot be automatically detected by the camera, you can enter all the necessary settings manually. This requires more advanced knowledge of Wi-Fi and network settings. Depending on the country/region of use, some restrictions on outdoor use or camera access point connections may apply when operating the IEEE802.11a/n wireless standard in the 5 GHz band. For details see Areas of Use and...
Page 9
![Page 9
9
When the camera is set to mode, connect a Wi-Fi enabled device using a Camera
Access Point connection. Initially, basic default network settings (SSID, password, etc.) are
saved in the camera and you can use these settings to immediately connect a device to the
camera.
If you prefer to use different settings, follow the procedure below.
1
Set the camera to mode and open
the [Connection Settings] submenu.
[wSystem Setup] > [Network Settings] >
[Connection Settings]
The current Camera Access...](http://img.usermanuals.tech/thumb/14/1567/w300_cinema-eos-c300-mark-ii-1478307182_d-8.png "Page 9
9
When the camera is set to mode, connect a Wi-Fi enabled device using a Camera
Access Point connection. Initially, basic default network settings (SSID, password, etc.) are
saved in the camera and you can use these settings to immediately connect a device to the
camera.
If you prefer to use different settings, follow the procedure below.
1
Set the camera to mode and open
the [Connection Settings] submenu.
[wSystem Setup] > [Network Settings] >
[Connection Settings]
The current Camera Access...")
9 When the camera is set to mode, connect a Wi-Fi enabled device using a Camera Access Point connection. Initially, basic default network settings (SSID, password, etc.) are saved in the camera and you can use these settings to immediately connect a device to the camera. If you prefer to use different settings, follow the procedure below. 1 Set the camera to mode and open the [Connection Settings] submenu. [wSystem Setup] > [Network Settings] > [Connection Settings] The current Camera Access...
Page 10
![Page 10
10
Camera Access Point Connection
6
To change the [Encryption Key]
(password), select [Input] and then
press SET.
Enter the encryption key (password) the camera
will use as a Wi-Fi access point using the
keyboard screen.
The encryption key (password) is needed to
connect the Wi-Fi enabled device to the camera. If
necessary, write it down.
After confirming the encryption key (password),
continue with the procedure to configure the IP
address assignment (A16).
Using the Virtual Keyboard Screen...](http://img.usermanuals.tech/thumb/14/1567/w300_cinema-eos-c300-mark-ii-1478307182_d-9.png "Page 10
10
Camera Access Point Connection
6
To change the [Encryption Key]
(password), select [Input] and then
press SET.
Enter the encryption key (password) the camera
will use as a Wi-Fi access point using the
keyboard screen.
The encryption key (password) is needed to
connect the Wi-Fi enabled device to the camera. If
necessary, write it down.
After confirming the encryption key (password),
continue with the procedure to configure the IP
address assignment (A16).
Using the Virtual Keyboard Screen...")
10 Camera Access Point Connection 6 To change the [Encryption Key] (password), select [Input] and then press SET. Enter the encryption key (password) the camera will use as a Wi-Fi access point using the keyboard screen. The encryption key (password) is needed to connect the Wi-Fi enabled device to the camera. If necessary, write it down. After confirming the encryption key (password), continue with the procedure to configure the IP address assignment (A16). Using the Virtual Keyboard Screen...