Canon Canoscan Lide220 Quick Start Guide

Cannot Scan Properly with Auto Scan
Check 1 Make sure that the items are placed correctly.
Placing Items (When Scanning from a Computer)
Check 2
 Multiple items scanning may not be supported.
Some applications do not support multiple image scanning. In that case, scan each item individually.
241
 

Slow Scanning Speed
Check 1 To view the image on a monitor, set the output resolution to around 150 dpi. To
print, set it to around 300 dpi.
Resolution
Check 2  Set Fading Correction , Grain Correction , etc. to None.
Refer to "Image Settings" for your model from Home of the  Online Manual for details.
Check 3
 In IJ Scan Utility, deselect the  Correct slanted text document  / Detect the
orientation of text document and rotate image  checkbox and scan again.
Settings (Document Scan) Dialog Box...

"There is not enough memory." Message Is Displayed
Check 1 Exit other applications and try again.
Check 2
 Reduce the resolution or output size and scan again.
Resolution
243
 

Computer Stops Operating during Scanning
Check 1 Restart the computer, reduce the output resolution in ScanGear (scanner
driver) and scan again.
Refer to "Output Settings" for your model from Home of the  Online Manual for details.
Check 2
 Delete unnecessary files to obtain sufficient free hard disk space, then scan
again.
Error message may appear if there is not enough hard disk space to scan and save, when the image size is too large (such as when scanning a large item at high resolution)....

Scanner Does Not Work after Upgrading Windows
Check Disconnect the USB cable, then uninstall (delete) and reinstall ScanGear
(scanner driver) and IJ Scan Utility.
Step 1: Uninstall ScanGear.
Refer to "Deleting the Unnecessary ScanGear (Scanner Driver)" for your model from Home of the  Online Manual
for how to delete ScanGear.
Step 2: Uninstall IJ Scan Utility.
•
Windows 8.1 / Windows 8:
1.
Click the  Settings charm >  Control Panel  > Programs  > Programs and Features .
2.
Double-click Canon IJ...

Scanned Image Does Not Open
Check If the data format is not supported by the application, scan the image again and
select a popular data format such as JPEG when saving it.
Refer to the application's manual for details. If you have any questions, contact the manufacturer of the
application.
246
 

Position or Size of the Image Cannot be Detected Correctly When
Scanning Using the Scanner Buttons
Check 1  Make sure that the items are placed correctly.
Placing Items (When Scanning from a Computer)
Check 2 Check that the settings match the item to be scanned.
If you cannot scan properly using the  AUTO SCAN button, specify the item type in IJ Scan Utility and scan
again.
Scanning Photos
Scanning Documents
Scanning with Favorite Settings
247
 

Scan Results Not Satisfactory
Scan Quality (Image Displayed on the Monitor) Is Poor
Scanned Image Is Surrounded by Extra White Areas
Cannot Scan at the Correct Size
Item Is Placed Correctly, but the Scanned Image Is Slanted
Scanned Image Is Enlarged (Reduced) on the Computer Monitor
248
 

Scan Quality (Image Displayed on the Monitor) Is Poor
Check 1 Increase the scanning resolution if the image is jagged.
Resolution
Check 2
 Set the display size to 100 %.
Some applications do not display images clearly if the display size is too small.
Check 3  Update the calibration data.
Perform calibration by scanning after setting  Execute at Every Scan in Calibration Settings  to ON  on the
Scanner  tab in the  Preferences  dialog box of ScanGear (scanner driver). Calibration may take time depending...

Check 8 If the color tone of images is different from the original document, take the
following measures and scan again.•
On the  Advanced Mode  tab of ScanGear, set  Image Adjustment in Image Settings  to None .
Refer to "Image Settings" for your model from Home of the  Online Manual for details.
•
On the Color Settings  tab in the Preferences  dialog box of ScanGear, set  Color Matching.
Refer to "Color Settings Tab" for your model from Home of the  Online Manual for details.
Check 9...