Canon Camera Eos 6d Basic Instruction Manual

							121
Search for images quickly with the index display showing four or nine images on one screen.
1Press the  button.
  Press the < u> button during image 
playback.
X[6 u] will be displayed on the lower 
right of the screen.
2Switch to the index display.
 Turn the  dial counterclockwise.XThe 4-image index display will appear. The 
selected image is highli ghted in a orange frame.
 If you turn the  dial further to the left, 
the 9-image index disp lay will appear. If you 
turn the <
6> dial to the right, the index 
display will change as follows: 9-image, 4-
image, and single-image display.
3Select an image or movie.
 Turn the  dial to move the orange 
frame and select the image. You can also 
select it with the <
V> or  key.  Press the < u> button to turn off the 
[6 u] icon, then turn the  dial 
to go to the next or preceding screen.
 
Press  in the index display, and the selected 
image will be displayed as a single image.
x  Searching for Images Quickly
H Display Multiple Images  on One Screen (Index Display)
Î
Î
COPY  
						

							122
You can magnify a captured image by approx. 1.5x to 10x on the LCD 
monitor.
1Magnify the image.
 The image can be magnified during 
image playback (single-image 
display), during image review after 
image capture, and from shooting-
ready state.
  Press the < u> button.
XThe magnified view will appear. The 
magnified area and [ 6u] will be 
displayed on the lower right of the 
screen.
  The image magnification increases 
as you turn the  dial clockwise. 
You can magnify the image up to 
approx. 10x.
  The image magnification decreases 
as you turn the < 6> dial 
counterclockwise. Turning the dial 
further will display the index display 
(p.121).
2Scroll around the image.
  Use < 9> to scroll around the 
magnified image.
  To exit the magnified display, press 
the < u> button or < x> button and 
the single-image display will 
reappear.
u  Magnified View
Magnified area position
COPY  
						

							123
1Play back the image.
 Press the < x> button to display 
images.
2Select a movie.
  Turn the < 5> dial to select the 
movie to be played.
  On the single-image display, the 
 icon displayed on the 
upper left indicates a movie. If the 
movie is a video snapshot, < > 
will be displayed.
  You can press the < B> button to 
switch to the shooting information 
display.
  In the index display, perforations at 
the left edge of a thumbnail indicate a 
movie.  As movies cannot be played 
on the index display, press < 0> 
to switch to the single-image 
display.
3In the single-image display, press 
< 0>.
XThe movie playback panel will appear 
at the bottom of the screen.
4Play back the movie.
  Select [7 ] (Play), then press < 0>.XThe movie will start playing.
  You can pause the movie playback by 
pressing .
  You can adjust the sound volume by 
turning the < 6> dial even during 
movie playback.
  For more details on the playback 
procedure, see the next page.
k  Playing Movies
Speaker
COPY  
						

							k Playing Movies
124 Movie Playback Panel
* When background music is set, the movie’s sound will not be played.
OperationPlayback Description
7 PlayPressing < 0> toggles between play and stop.
8 Slow motionAdjust the slow motion  speed by pressing the < U> key. 
The slow-motion speed is indica ted at the upper right of the 
screen.
5  First frameDisplays the movie’s first frame.
3  Previous 
frameEach time you press < 0>, the previous frame is displayed. 
If you hold down , it will rewind the movie.
6 Next frameEach time you press < 0>, the movie will play frame-by-
frame. If you hold down < 0>, it will fast  forward the movie.
4 Last frameDisplays the movie’s last frame.
 Background 
music*Play back a movie with the selected background music.
X  EditDisplays the editing screen.
Playback position
mm’ ss”Playback time (minutes:seconds with [ Movie play count: 
Rec time ] set)
hh:mm:ss:ffTime code (hours:minutes :seconds:frames with [Movie play 
count: Time code ] set)
9 Vo l u m eYou can adjust the built-in sp eaker’s (p.123) volume by 
turning the < 6> dial.
3 2Pressing the < M> button returns to the single-image 
display.
COPY  
						

							125
You can either select and erase images one by one or erase them in 
one batch. Protected images will not be erased. Once an image is erased, it cann ot be recovered. Make sure 
you no longer need the image before erasing it. To prevent 
important images from being erased accidentally, protect 
them. Erasing a RAW+JPEG image will erase both the RAW 
and JPEG images.
1Play back the image to be erased.
2Press the < L> button.
XThe Erase menu will appear at the 
bottom of the screen.
3Erase the image.
  Select [ Erase], then press < 0>. The 
image displayed will be erased.
L  Erasing Images
Erasing a Single Image
COPY  
						

							
COPY  
						

							127
Viewing the CD-ROM Instruction Manuals /Downloading Images to Your Computer
This chapter explains how to install the Camera 
Instruction Manual (on the CD-ROM provided) to your 
computer, download images fr om the camera to your 
computer, gives an overview  of the software in the EOS 
DIGITAL Solution Disk (CD-RO M), and explains how to 
install the software on your  computer. It also explains 
how to view the PDF files on  the Software Instruction 
Manual CD-ROM.
EOS DIGITAL 
Solution Disk
(Software)
Software 
Instruction ManualCamera 
Instruction Manual
COPY  
						

							128
The Camera Instruction Manual CD-ROM contains the 
following electronic manuals (PDF):
  Camera Instruction Manual
Explains all the camera functions and procedures, including basic 
content (this booklet).
  Wi-Fi Function Instruction Manual
Explains all the Wi-Fi functions and procedures, including basic 
content.
To view the instruction manuals (PDF  files), Adobe Reader 6.0 or higher 
must be installed in your computer. Adobe Reader can be downloaded 
free from the Internet. After installing Adobe Reader, follow the 
procedure below.
1Insert the “CAMERA INSTRUCTION 
MANUAL” CD-ROM into your computer.
2Double-click the CD-ROM icon.
  For Windows, the icon is displayed in [ (My) 
Computer ].
  For Macintosh, the icon is displayed on the 
desktop.
  The icon displayed will di ffer depending on your 
computer’s operating system.
Viewing the Camera Instruction Manual CD-ROM
Viewing the Camera Instruction Manual on the CD-ROM
COPY  
						

							129
Viewing the Camera Instruction Manual CD-ROM
3Double-click the START file.
XThe screen shown in step 4 will appear.
  The icon displayed will di ffer depending on your 
computer’s operating system.
4Click on the manual you want to view.
  Click on the name of the manual under your 
respective language.
XThe instruction manual  in your language will be 
displayed.
  You can save the PDF fi le to your computer.
  All the instruction manuals  (PDF files) have page links to make it quick to 
find the desired page. Click on a page number in the Table of Contents or 
Index and that page will appear.
  To learn how to use Adobe Reader, see Adobe Re ader’s Help section.
COPY  
						

							130
You can use the provided software to download the images in the 
camera to your computer. There are two ways to do this.
1Install the software (p.134).
2Use the provided interface cable 
to connect the camera to your 
computer.
 Use the interface cable provided with 
the camera.
  Connect the cable to the camera’s 
 terminal with the cable 
plug’s < D> icon facing the front of 
the camera.
  Connect the cord’s plug to the 
computer’s USB terminal.
3Use EOS Utility to download the 
images/movies.
 For details, refer to the Software 
Instruction Manual on the CD-ROM 
(p.135).
Downloading Images to a Computer
Download by Connecting the Camera to the Computer
Under the [ 53] tab, if [ Wi-Fi] is set to [ Enable], the camera cannot connect 
to a computer. Set [ Wi-Fi] to [Disable ], then connect the interface cable.
COPY