Canon 80d Manual

321
N Shooting Time-lapse Movies
Card- time left
The total length of a time-lapse movie that can be recorded on the 
card based on its remaining capacity.
7Exit the menu.
Press the  button to turn off 
the menu screen.
8Read the message.
Read the message and select [OK].
9Take test shots.
Set the exposure and shooting 
functions, and press the shutter 
button halfway to focus as you do 
with Live View shooting.
Press the shutter button completely to 
start taking test shots. The test 
images will be...

N Shooting Time-lapse Movies
322
11Shoot the time-lapse movie.
Press the shutter button halfway to 
check the focus and exposure.
Press the shutter button completely to 
start shooting the time-lapse movie.
AF will not work during time-lapse 
movie shooting. The exposure setting 
for the first shot will be applied to 
subsequent shots.
During time-lapse movie shooting, 
nothing will be displayed on the LCD 
monitor.  will blink on the LCD panel.
Since the electroni c shutter is used 
for shooting,...

323
N Shooting Time-lapse Movies
With time-lapse movie set to [ Enable], you cannot set [z 4: Movie rec 
quality ] and [53: Video system ].
 Cannot be set when movie digital zoom is set.
 If the camera is connected to a computer with the interface cable, or if an 
HDMI cable is connected to the camera, you cannot select [ Enable].
 The maximum ISO speed will be ISO 6400 in the < d>, < s>, < f >, 
and < F> modes, and in the < a> mode with ISO Auto set.
 If the shooting mode is < f>,  or < F>, the...

N Shooting Time-lapse Movies
324
If the time it takes to record to the card exceeds the interval between 
shots due to the shooting functions set or card performance, shooting 
with the set interval may not be performed.
 The captured images are not recorded  as still photos. Even if you cancel 
the time-lapse movie shooting after only one shot is taken, it will be 
recorded as a movie file.
 If the card does not have enough free space to record the set number of 
shots, [ Playback time ] will be...

325
N Shooting Time-lapse Movies
You can perform time-lapse movie shooting with a fully-charged Battery 
Pack LP-E6N for the approximate durations (from start of shooting until the 
battery is exhausted) listed in the table below. Possible time for time-lapse 
movie shooting will vary depending  on the shooting conditions.
Approximate Total Possible Time for Time-lapse Movie Shooting(Approx.)
Room Temperature 
(23°C / 73°F)Low Temperatures  (0°C / 32°F)
Shooting interval: 1 sec.3 hr. 50 min.3 hr. 20...

326
z4
When the Live View shooting/Movie 
shooting switch is set to <
k>, the 
movie shooting menu  options will appear 
under the [
z4] and [z5] tabs (the 
[
z2] and [z3] tabs in Basic Zone 
modes).
Movie Servo AF
With this function enabled, the camera focuses on the subject 
continuously during mov ie shooting. The default setting is [
Enable].When [Enable] is set:
•The camera focuses on the subject continuously even when you 
are not pressing the shutter button halfway.
• If you want to keep the...

327
3 Menu Function Settings
AF method
The AF methods are the same as described on pages 276-285. You 
can select [u+Tracking], [FlexiZone - Multi], or [FlexiZone - 
Single
].
Cautions When [Movie Servo AF] is Set to [Enable]
 Shooting Conditions that Make Focusing Difficult
• A fast-moving subject approaching  or moving away from the camera.
• A subject moving at a close distance in front of the camera.
• Also see “Shooting Conditions that  Make Focusing Difficult” on page 
284.
 Since this drives...

3 Menu Function Settings
328
Movie recording quality
You can set the movie recording format (MOV or MP4) and movie 
recording size. For details, see page 306.
Digital zoom
You can use digital zoom for telephoto shooting. For details, see 
page 311.
Sound recordingYou can set the sound-recording f unctions. For details, see page 
312. 

329
3 Menu Function Settings
Movie Servo AF speedO
You can set the Movie Servo AF’s AF 
speed and its operation conditions.
This function is settable when [
Movie 
Servo AF
] is set to [Enable] and [AF 
method] is set to [FlexiZone - Single]. 
Additionally, the function is enabled 
when using a lens s upporting slow focus 
transition during movie shooting*.
When active:[Always on] sets the AF adjustment speed to take effect 
at all times for movie shoot ing (before and during movie 
shooting). [
During...

3 Menu Function Settings
330
Movie Servo AF tracking sensitivityO
You can change the Movie Servo AF’s 
tracking sensitivity to one of seven 
levels. This affects the responsiveness of 
AF tracking sensitivity when the AF 
points stray from the subject, such as 
during panning or when an obstacle cuts 
across the AF points.
This function is settable when [
Movie 
Servo AF
] is set to [Enable] and [AF 
method
] is set to [FlexiZone - Single].
Locked on: -3/-2/-1This setting makes the camera less incli ned...