Canon 70d W User Manual

391
w: Register Custom Shooting ModesN
 Shooting Function Settings
Shooting mode, Shutter speed,  Aperture, ISO speed, Exposure 
compensation, Flash exposure compensation, AF operation, AF 
point, Drive mode, Metering mode.
  Menu functions
z1 Image quality, VF grid display  l, Viewfinder level, Beep, 
Release shutter without card, Image review
z 2 Lens aberration correction (Perip heral illumination, Chromatic 
aberration), Flash control, E-TTL II metering, Flash sync. 
speed in Av mode, Red-eye...

w: Register Custom Shooting ModesN
392
C.Fn I: Exposure
Exposure level increments, ISO speed setting increments, 
Bracketing auto cancel, Brac keting sequence, Number of 
bracketed shots, Safety shift
C.Fn II: Autofocus Tracking sensitivity, Acceleration/deceleration tracking, AI 
Servo 1st image priority, AI  Servo 2nd image priority, AF-
assist beam firing, Lens drive when AF impossible, Select AF 
area selection mode, AF area selection method, Orientation 
linked AF point, Manual AF point  selection...

393
Reference
This chapter provides reference information for camera 
features, system accessories, etc.
Certification Logo
Select [5 4: Certification Logo Display ] and press  to 
display some of the l ogos of the camera’s certifications. Other 
certification logo s can be found in this In struction Manual, on the 
camera body, and on the camera’s package.
COPY  

394
When you press the  button 
while the camera is ready to shoot, you 
can display [ Displays camera settings], 
[Electronic level ] (p.65), and [Displays 
shooting functions ] (p.395).
Under the [ 53] tab, [ z button 
display options ] enables you to select 
the options displayed when the < B> 
button is pressed.
  Select the desired display option and 
press < 0> to append a checkmark 
< X>.
  After making the selection, select 
[OK ], then press < 0>.
B  Button Functions
Camera Settings
 Note that...

395
B Button Functions
 Pressing the < Q> button enables Quick Control of the shooting 
settings (p.50).
  When you press the < f>, < R >, , , < S>, or 
< B > button, the setting screen will appear and you can use < 6>, 
< 5 >, < 9>, and < B> to set the function.
Shooting Function Settings
Battery check Shutter speed
Auto Lighting Optimizer
Image-recording quality
Picture Style
Shooting mode
ISO speed
Possible shots
Eye-Fi card transmission status
Max. burst/
Number of remaining 
multiple exposures
AF...

396
You can check the battery’s condition on the LCD monitor. Each Battery 
Pack LP-E6 has a unique serial number, and you can register multiple 
battery packs to the camera. When you use this feature, you can check 
the registered battery pack’s remain ing capacity and operation history.
Select [Battery info.].
 Under the [ 54] tab, select [ Battery 
info. ], then press < 0>.
X The battery info screen will appear.
3  Checking the Battery Information
Battery model or household power source being used....

397
3 Checking the Battery Information
You can register up to six LP-E6 battery packs to the camera. To 
register multiple battery packs to the camera, do the procedure below 
for each battery pack.
1Press the < B> button.
 With the battery info. screen 
displayed, press the < B> button.
X The battery history screen will 
appear.
X If the battery has not been registered, 
it will be grayed out.
2Select [Register].
  Select [Register ], then press .
X The confirmation dialog will appear.
3Select [OK]....

3 Checking the Battery Information
398
It is convenient to label all regist ered Battery Pack LP-E6 with their serial numbers, using commercially available labels.
1Write the serial number on a 
label.
 Write the serial number displayed on 
the battery history screen on a label 
approx. 25 mm x 15 mm / 1.0 in. x 0.6 
in. in size.
2Take out the battery and affix the 
label.
 Set the power switch to .
  Open the battery compartment cover 
and remove the battery.
  Affix the label as shown (side with no...

399
3 Checking the Battery Information
You can check the remaining capaci ty of any battery pack (even when not installed) and also when it was last used.
Look for the serial number.
 Refer to the battery’s serial number 
label and look for the battery’s serial 
number on the battery history screen.
X You can check the respective battery 
pack’s remaining capacity and the 
date when it was last used.
1Select [Delete info.].
  Follow step 2 on page 397 to select [ Delete info.], then press 
< 0 >.
2Select...

400
With AC Adapter Kit ACK-E6 (sold separately), you can connect the 
camera to a household power outle t and not worry about the remaining 
battery level.
1Connect the DC Coupler’s plug.
 Connect the DC Coupl er’s plug to the 
AC Adapter’s socket.
2Connect the power cord.
  Connect the power cord as shown in 
the illustration.
  After using the camera, unplug the 
power plug from the power outlet.
3Place the cord in the groove.
 Insert the DC Coupler’s cord carefully 
without damaging the cord.
4Insert...