Candy Cs2 115 User Instructions

20
21
PL
Wypoziomowaç pralkë
manipulujåc jej przednimi
nóãkami.
Przekrëciç n
óãkë podnoszåc
jå lub opuszczajåc, tak aby
uzyskaç doskonaäe
przyleganie do podäoãa.
Sprawdziç czy pokr´t∏o
programów jest na pozycji
OFF i czy drzwiczki sà
zamkni´te.Wäoãyç wtyczkë kabla
zasilajåcego do gniazda
sleciowego.
Po zainstalowaniu,
urzådzenie naleãy ustawiç w
pozycji zapewniajåcej
swobodny dostëp do
kontaktu (wtyczki).
Praöka má 2 pohyblivé
noïiöky, kterÿmi lze vyrovnat
vodorovnou polohu praöky.
Otáöením sniïujte...

CAPITOLUL6
COMENZIManerul usii
Led indicator hublou blocat 
Buton Pornit/Oprit 
Buton Antisifonare 
Buton Aquaplus 
Buton intensiv 
Buton pornire intarziata 
Buton viteza de stoarcere
Led indicator viteza de
stoarcere
Led indicator sistem de
contorizare a timpului ramas
din program in curs
Leduri indicatoare butoane 
Buton selectare programe 
Caseta detergenti 
22
23
A
B
C
D
E
F
G
H
I
L
M
N
P
DE
KAPITEL 6
BEDIENUNGSELEMENTETüröffnungsgriff
Leuchtanzeige Tür
geschlossen
Start/Pause Taste
Taste...

25
24
A
2 min.
B
DE
BESCHREIBUNG DERBEDIENELEMENTETÜRÖFFNUNGSGRIFF 
Um das Bullauge zu öffnen,
drücken Sie den Hebel im
Türgriff.ACHTUNG:
DIE SICHERHEITSTÜR-
VERRIEGELUNG
VERHINDERT DAS
SOFORTIGE ÖFFNEN 
DES BULLAUGES NACH
BEENDIGUNG DES
WASCH-PROGRAMMS.
WARTEN SIE DAHER NACH
DEM LETZTEN
SCHLEUDERN CA. ZWEI
MINUTEN, BEVOR SIE DIE
TÜR ÖFFNEN.LEUCHTANZEIGE TÜR
GESCHLOSSEN 
Die Anzeige leuchtet, wenn die
Tür korrekt geschlossen ist und
das Gerät eingeschaltet ist.
Nach Drücken der Taste
START/PAUSE blinkt...

27
26
C
DE
START/PAUSE TASTE
Nachdem Sie das gewünschte
Waschprogramm eingestellt
haben, warten Sie, bis die
STOP-Anzeige anfängt zu
blinken, bevor Sie die START-
Taste drücken.
Drücken Sie diese Taste, um das
Programm zu starten, die mit
dem Programmwahlschalter
gewählt wurde (je nach
eingestelltem Programm wird
eine der Leuchtanzeigen
aufleuchten).
ANMERKUNG: NACH DER
BETÄTIGUNG DER START-
TASTE DAUERT ES EINIGE
SEKUNDEN, BIS DAS
GERÄT ANFÄNGT ZU
ARBEITEN.EINSTELLUNGEN NACH DEM
PROGRAMMSTART ÄNDERN...

28
D
EN
The option buttons should
be selected before pressing
the START button
CREASE GUARD button 
The Crease Guard function
minimizes creases as much
as possible with a uniquely
designed     anti-crease
system that is tailored to
specific fabrics.
MIXED FABRICS- the water is
gradually cooled
throughout the final two
rinses with no spinning and
then a delicate spin assures
the maximum relaxation of
the fabrics.
DELICATE FABRICS– final two
rinses with no spinning and
then the fabrics are left in
water...

30
E
EN
AQUAPLUS BUTTON
By pressing this button you
can activate a special new
wash cycle in the Colourfast
and Mixed Fabrics
programs, thanks to the new
Sensor Activa System. This
option treats with care the
fibres of garments and the
delicate skin of those who
wear them.
The load is washed in a
much larger quantity of
water and this, together with
the new combined action
of the drum rotation cycles,
where water is filled and
emptied, will give you
garments which have been
cleaned and rinsed to...

32
F
EN
INTENSIVE BUTTON
By pressing this button,
which can only be
activated in the Cotton
cycles, the sensors in the
new Activa system come
into operation. They affect
both the selected
temperature, keeping it at a
constant level throughout
the wash cycle, and the
mechanical function of the
drum.
The drum is made to turn at
two different speeds at
crucial moments. When the
detergent enters the
garments, the drum rotates
in such a way that the
detergent is distributed in a
uniform manner; during the...

START DELAY BUTTON
Appliance start time can be
set with this button, delaying
the star by 3, 6 or 9 hours.
Proceed as follow to set a
delayed start:
Select a programme
(“STOP” indicator light blinks)
Press Start Delay button
(each time the button is
pressed the start will be
delayed by 3, 6 or 9 hours
respectively and the
corresponding light will
blink).
Press START to commence
the Start Delay operation
(the indicator light
associated with the
selected Start Delay time
stops blinking and remains
ON).
At...

36
H
EN
SPIN SPEED BUTTON
The spin cycle is very
important to remove as
much water as possible from
the laundry without
damaging the fabrics. You
can adjust the spin speed of
the machine to suit your
needs.
By pressing this button, it is
possible to reduce the
maximum speed, and if you
wish, the spin cycle can be
cancelled.
To reactivate the spin cycle
is enough to press the
button until you reach the
spin speed you would like to
set.
For not damage the fabrics,
it is not possible to increase
the speed...

38
EN
BUTTONS INDICATOR LIGHT
The indicator light around
the option buttons will light
when specific options 
are selected
PROGRAMME SELECTOR WITH
OFF POSITION 
RO
TATES IN BOTH
DIRECTIONS.
THE MACHINE IS
TURNED ON BY
SELECTING A
PROGRAMME VIA  THE
PROGRAMME
SELECTOR.
THIS STATUS WILL BE
INDICATED BY THE STOP
INDICATOR LIGHT
FLASHING, THIS LIGHT
WILL CONTINUE TO
FLASH UNTIL THE
MACHINE HAS STARTED
OR THE MACHINE IS
RETURNED TO THE OFF
POSITION.
Press the Start/Pause
button to start the selected
cycle....