Candy Cdi 2012e10 S User Instructions

20
EN 50242 place load
Capacity with pans and dishes
Water supply pressure 
Fuse
Power input
Supply voltage12
8 persons
Min. 0,08 - Max 0,8 MPa
(see rating plate)
(see rating plate)
(see rating plate)DESCRIPTION OF THE CONTROL
TECHNICAL DATA: DIMENSIONS:Height
Depth 
Width 
Depth with door open
cm
cm
cm
cm82 ÷ 88,5
55
59,8
11 7
A
"ON/OFF" button 
B
PROGRAMME DESCRIPTION 
C
"PROGRAMS" buttons
D 
"HALF LOAD" button
E
"DELAY START" button 
F 
"PROGRAM STATUS" LEDs/...

22
■Close the door to allow the water to be
discharged.
The running program will be cancelled
and the LED for the“recommended”
program or the LED for the program that
was used at least 3 times consecutively
will start to blink.
IMPORTANT 
To cancel the "COLD RINSE" program,
simultaneously hold down the
"RAPID" program button and "HALF
LOAD" option button.
■At this point a new program can be set.
WARNING!
Before starting a new programme,
you should check that there is still...

25
24
5
•
• • ••••• ••••
• ••
50°C
32
•
•
• •
65°C
95
•
•
YES
75°C
120
•
••
•
••••
45°C
140
• • •
• •
YES
•
•
• • • •
•
YES
YES
YES YES
Programme PROGRAMME SELECTION
YES
Check list  
Avarage
durationin minutes
Special function
buttons 
available
Detergent for soaking
(Prewash)
Detergent for washing
Clean filter
Check rinse aid 
dispenser
Check salt container
Hot pre-wash
Cold pre-wash
Main wash
First cold rinse
Second cold rinse
Hot rinse with rinse aid
With cold water (15°C)
-Tolerance ± 10%-
"DELAY...

27
N.B.: Should any of the situations occur and should the machine give a bad wash performance,
it is necessary to remove the deposits from the dishes by hand since the final drying cycle hardens the
deposits which a second wash in the machine would not be able to remove.
If the malfunction continues contact a Service Centre quoting the serial number of the dishwasher.
This is found on the plaque on the inside of the dishwasher door at the top or on the guarantee. 
This information will make it possible...

The manufacturer declines all responsibility in the event of any printing mistakes in this
booklet. The manufacturer also reserves the right to make appropriate modifications to
its products without changing the essential characteristics.
 

04.07- 41012911 - Printed in Italy - Imprimé en ItalieEN