Browning Cynergy Shotgun Owners Manual

STANDARD INVECTOR
™
(28 GA. & .410)
Rim Notches  Pattern With Lead Shot Pattern With Steel ShotI Full FullIII Modified Imp. ModifiedIIII Imp. Cylinder Modified
1
IIIII Skeet Modified
1
No Notches Cylinder Imp. Cylinder1When more than one choke designation is listed for a given steel shot pattern, use the
more open choke listed for high velocity, larger shot size steel shot loads.INVECTOR-PLUS
™
(20 GA. &  12 GA.)
Rim Notches  Pattern With Lead Shot Pattern With Steel ShotKnurled X-Full Turkey **IFull*II...

21 20
CLEANING SUGGESTIONSYour Cynergy Over and Under Shotgun will function better and more 
reliably over a longer period of time if it is properly maintained and
kept clean.BEFORE PERFORMING ANY CLEANING PROCEDURES, ALWAYS MAKE 
CERTAIN THERE ARE NO SHELLS IN THE CHAMBERS.You should clean your Cynergy after every day of shooting, and more
often if it becomes excessively dirty. A minimum cleaning includes
wiping down the action and oiling/greasing key parts. Most regular
maintenance will also include...

thickness of each pad, and each spacer is 
1⁄4 thick. Call the Parts 
Dept. number above for ordering any of these extra accessories.
Two hidden screw slits are located at each end of the recoil pad.
Locate these entry holes by gently probing in the areas shown in
Figure 11. When the access holes are located, place a small amount 
of petroleum jelly on the tip of a Phillips screwdriver to avoid 
damage to the recoil pad and engage the hidden screw. Turn 
counterclockwise until the screw is completely...

THE BROWNING TRIPLE TRIGGER
™SYSTEM
This information will explain how to remove, to replace and to adjust
the trigger shoes in the Triple Trigger
™System, unique to Browning
Sporting models.
The Triple Trigger System has three different gold finished trigger
shoes with different surfaces: wide with checkered surface, wide with
smooth surface and narrow with smooth surface. Each trigger shoe is
adjustable to three positions for length of pull. Please heed all safety
warnings, cautions and procedures found...

27
To replace the trigger shoe, press the rearward end of the trigger 
plate and slide the trigger shoe down the side grooves of the plate.CHANGING THE LENGTH OF PULLWith the trigger shoe loosely on the trigger plate, select the length 
of pull by lining up the notch on the right side of the trigger shoe 
with one of the three notches on the right side of the trigger plate
(Figure 16). Make sure you line up the notches so you do not mar 
the trigger plate.
Use an Allen wrench to tighten the screw on the...

NOTES
2803-220/Cynergy OM  4/14/04  4:05 PM  Page 28 

SERVICE OR REPAIR 
If your firearm should require service or repairs, we suggest you
first contact a local recommended Browning Firearms Service
Center. Contact your Browning sporting goods dealer or call our
Service Department for the address of the Service Center nearest
you. Otherwise, you may send your firearm directly to our own
Service Department. For technical questions about your firearm or
service, contact:
Browning Service Department
One Browning Place
Arnold, MO 63010-9406
Phone:...

WWW.BROWNING.COM
BROWNING US:Morgan, Utah 84050-9326BROWNING CANADA:Browning Canada Sports Ltd/Ltee,St-Laurent, Quebec, H4S 1W6BROWNING INTL:Parc Industriel des Hauts-Sarts, B-4040 Herstal, Belgium
AO03111/03220
03-220/Cynergy OM Cover  4/14/04  4:22 PM  Page 1