Brother Laserprinter Hl 1650 1670n User Guide

CHAPTER 6 TROUBLESHOOTING
6-15
!Caution
• We recommend that you put the Drum unit assembly on a piece of
disposable paper or cloth so you don’t accidentally spill or scatter toner.
• To prevent damage to the printer caused by static electricity, do not touch
the electrodes shown below.
☛
☛☛ ☛ 3.Pull the jammed paper out of the printer.
Fig. 6-12
If the paper jam can be cleared, go to Step 7.
☛
☛☛ ☛ 4.Open the Face up output tray.
Fig. 6-13 

6-16
!Caution
After you have just used the printer, some internal parts of the printer are
extremely hot!  Wait for the printer to cool down before you touch the
internal parts of the printer.
☛
☛☛ ☛ 5.Open the Jam clear cover.  Pull the jammed paper out of the fuser unit.
Fig. 6-14
☛
☛☛ ☛ 6.Close the Jam clear cover.  Close the Face up output tray.
Fig. 6-15
Jam clear cover 

CHAPTER 6 TROUBLESHOOTING
6-17
☛
☛☛ ☛ 7.Install the Drum unit assembly into the printer.
Fig. 6-16
☛
☛☛ ☛ 8.Close the Front cover. 

6-18
J J
A A
M M
   
D D
U U
P P
L L
E E
X X
JAM DUPLEX
Follow the instructions below to clear a paper jam:
☛
☛☛ ☛ 1.Open the Face up output tray.
Fig. 6-17
☛
☛☛ ☛ 2.Pull the jammed paper out of the fuser unit.
Fig. 6-18 

CHAPTER 6 TROUBLESHOOTING
6-19
☛
☛☛ ☛ 3.Close the Face up output tray.
Fig. 6-19
If the paper jam cannot be cleared, go to the next step.
☛
☛☛ ☛ 4.Pull the Duplex tray and Paper cassette out of the printer.
Fig. 6-20
☛
☛☛ ☛ 5.Pull the jammed paper out of the printer.
Fig. 6-21 

6-20
☛
☛☛ ☛ 6.Install the Duplex tray and Paper cassette into the printer.
Fig. 6-22
✒  Note
•  The JAM DUPLEX message appears if you remove a sheet of paper from the Face
down output tray after only one side has printed.
•  The paper sizes you can use for the Duplex Printing function are A4, Letter and Legal.
•  If the Paper adjustment lever for duplex printing is not set correctly for the paper size,
paper jams may occur and the printing will be out of position on the page. 

CHAPTER 6 TROUBLESHOOTING
6-21
P P
A A
P P
E E
R R
   
J J
A A
M M
PAPER JAM
Follow the instructions below to clear a paper jam:
☛
☛☛ ☛ 1.Pull the Paper cassette completely out of the printer.
Fig. 6-23
☛
☛☛ ☛ 2.Pull the jammed paper out of the printer.
Fig. 6-24
If the paper jam can be cleared, go to Step 10. 

6-22
☛
☛☛ ☛ 3.Press the Cover release button, and then open the Front cover.
Fig. 6-25
☛
☛☛ ☛ 4.Pull the Drum unit assembly out of the printer. Pull the jammed paper up and
out of the printer
Fig. 6-26
If the paper jam can be cleared, go to Step 8.
☛
☛☛ ☛ 5.Open the Face up output tray.
Fig. 6-27 

CHAPTER 6 TROUBLESHOOTING
6-23
☛
☛☛ ☛ 6.Open the Jam clear cover.  Pull the jammed paper out of the fuser unit.
Fig. 6-28
☛
☛☛ ☛ 7.Close the Jam clear cover.  Close the Face up output tray.
Fig. 6-29
Jam clear cover 

6-24
☛
☛☛ ☛ 8.Install the Drum unit assembly into the printer.
Fig. 6-30
☛
☛☛ ☛ 9. Close the Front cover.
☛
☛☛ ☛ 10.Install the paper cassette into the printer.