Brother Hl 5280dw User Manual

4. Control Panel
 53
Reprinting the last job three times
aMake sure that the REPRINT setting is ON by using the control panel buttons to enter the SETUP menu.
Note
If you print with the driver we have supplied with the printer, the settings for Job Spooling in the printer 
driver will take priority over the settings made on the control panel. For more information, see Device 
Options on page 31.
 
bPress Reprint.
If you wait too long to continue the control panel button operation, the printer leaves the...

4. Control Panel
 54
How to print Secure data
aPress Reprint. If there is no data, the LCD shows NO DATA STORED. 
LAST JOB
bPress the + or - button to choose SECURE FILE. Press Set. 
SECURE FILE
cPress the + or - button to choose the user name. Press Set. 
XXXXXX
dPress the + or - button to choose the job. Press Set. 
XXXXXX
eEnter your password. Press Set. 
PASS NO.=0000
Note
The printer will exit this menu after a time-out period.
 
fPress Set or Reprint.
If you press Go, the LCD shows PRESS SET TO...

4. Control Panel
 55
Using the control panel LCD menu
When you use the Menu buttons (+, -, Set or Back), remember the following basic steps:
„If no control panel operations are performed for 30 seconds, the LCD automatically returns to READY.
„When you press Set to choose a setting, an asterisk appears at the end of the LCD for a short time. After 
that, the LCD returns to the previous menu level.
„After changing the status or a setting, pressing Back before you press Set will cause the LCD to return to...

4. Control Panel
 56
Menu table
There are eight menus. For more information about the selections available in each menu, see the tables 
below.
Note
The control panel LCD names for the paper trays are as follows.
• Standard paper tray: TRAY1
• Multi-purpose tray: MP
• Optional lower tray: TRAY2 or TRAY3
 
INFORMATION
SubmenuMenu SelectionsDescriptions
PRINT SETTINGSPrints the Printer Settings page.
PRINT TESTPrints the test page.
PRINT DEMOPrints the demonstration sheet.
PRINT FILE LISTPrints the list of...

4. Control Panel
 57
PAPER
SubmenuOptionsDescriptions
SOURCEAUTO*/MP/TRAY1/TRAY2/TRAY3Chooses the tray that will be used.
PRIORITYMP>T1>T2>T3*/T1>T2>T3>MP/
T1>T2>T3When SOURCE is chosen as AUTO:
Chooses the order in which the printer uses the 
paper trays that contain paper of the same size.
MP FIRST ON/OFF*Chooses whether to feed paper from the MP tray as 
a priority.
MP SIZEANY*/LETTER/LEGAL/A4... Chooses the size of paper you put in the MP tray.
MP MEDIA FIXOFF*/PLAIN PAPER/THIN PAP
ER...Chooses the...

4. Control Panel
 58
PANEL CONTROL LCD DENSITY0*/1Adjusts the density of the LCD.
AUTO ONLINEON*/OFF
BUTTON REPEAT0.1*/0.2/0.3/0.4/0.5/1.0
/1.5/2.0 SECSets the time for the LCD message to 
change when holding the + or - 
button at intervals.
MESSAGE SCROLLLEVEL 1*/LEVEL 
2.../LEVEL10Sets the time in seconds that an LCD 
message will scroll across the LCD. 
From Level 1=0.2 to Level 10=2.0.
POWER SAVE TIME 1/2/3/4/5*.../ 240 MINSets the time to return to Power Save 
mode.
AUTO CONTINUEOFF*/ON
LOCK PANEL...

4. Control Panel
 59
PAPERLETTER*/LEGAL/A4*/EXECU
TIVE/COM-10/DL/JIS B5/B
5/A5/B6/A6/MONARCH/C5/A4
LONG/FOLIO/DLL/POST CA
RD/ORGANIZER J/ORGANIZ
ER K/ORGANIZER M/ORGAN
IZER LSets the size of paper.
COPIES1*/2.../999Sets the number of printed pages.
ORIENTATIONPORTRAIT*/LANDSCAPEThis printer can print pages in portrait 
or landscape orientation.
PRINT POSITION X OFFSET -500/-499.../0*.../+499/
+500Moves the print start position (at the 
top-left corner of pages) horizontally 
up to -500 (left) to +500...

4. Control Panel
 60
HP LASERJET FONT NO. I000...#### (59)*
FONT PITCH/POIN
T##.## (10.00/12.00)*
SYMBOL SETPC-8*... Sets the symbol set or the character 
set.
TABLE PRINTPrints code table.
AUTO LFOFF*/ONON: CR i CR+LF,OFF: CR i CR
AUTO CROFF*/ONON: LFiLF+CR, FFiFF+CR, or 
VT i VT+CR
OFF: LF i LF, FF i FF, or VT i 
VT
AUTO WRAPOFF*/ONChooses whether a line feed and 
carriage return will happen when the 
printer reaches the right margin.
AUTO SKIPOFF*/ONChooses whether a line feed and 
carriage return...

4. Control Panel
 61
EPSON FX-850 FONT NO. I000...####(59)*
FONT PITCH/POIN
T##.##(10.00/12.00)*
CHARACTER SET PC-8...(US ASCII)*Sets the symbol set or the character 
set.
TABLE PRINTPrints code table.
AUTO LFOFF*/ONON: CR i CR+LF OFF: CR i CR
AUTO MASKOFF*/ON
LEFT MARGIN ####Sets the left margin at column 0 to 70 
columns at 10 cpi.
RIGHT MARGIN ####Sets the right margin at column 10 to 
80 columns at 10 cpi.
TOP MARGIN ####Sets the top margin at a distance 
from the top edge of the paper - 0, 
0.33,...

4. Control Panel
 62
IBM PROPRINTER FONT NO. I000...####(59)*
FONT PITCH ##.##(10.00/12.00)*
CHARACTER SETPC-8...*Sets the symbol set or the character 
set.
TABLE PRINTPrints code table.
AUTO LFOFF*/ONON: CR i CR+LF,OFF: CR i CR
AUTO CROFF*/ONON: LFiLF+CR, FFiFF+CR, or 
VT i VT+CR
OFF: LF i LF, FF i FF, or VT i 
VT
AUTO MASKOFF*/ON
LEFT MARGIN ####Sets the left margin at column 0 to 70 
columns at 10 cpi.
RIGHT MARGIN ####Sets the right margin at column 10 to 
80 columns at 10 cpi.
TOP MARGIN ####Sets...