Brother Hl 4050cdn User Manual

Printing Methods
12
2
bPull the paper tray completely out of the printer. 
cWhile pressing the green paper-guide release lever, slide the paper guides to fit the paper size. Make 
sure that the guides are firmly in the slots.
 
dPut paper in the tray, and make sure that the paper is below the maximum paper mark (b). The side to 
be printed on must be face down.
 
 

Printing Methods
13
2
ePut the paper tray firmly back in the printer. Make sure that it is completely inserted into the printer.
fLift up the support flap to prevent paper from sliding off the face-down output tray, or remove each page 
as soon as it comes out of the printer.
 
gSend the print data to the printer.
 

Printing Methods
14
2
Printing on plain paper or bond paper from the MP tray2
(For the recommended paper to use, see About paperon page 6.)
aChoose the following from the printer driver:
Paper Size............................ (1)
Media Type........................... (2)
Paper Source....................... (3)
and any other settings.

Windows
® printer driver
 

BR-Script printer driver (HL-4050CDN / HL-4070CDW only)
Note
To use the BR-Script printer driver you must install the driver using the Custom...

Printing Methods
15
2

Macintosh® printer driver
Paper Size........................ (1)
Media Type...................... (2)
Paper Source................... (3)
bOpen the MP tray and lower it gently. 
cPull out the MP tray support and unfold the flap (1).     
12
3
1
 

Printing Methods
16
2
dLift up the support flap to prevent paper from sliding off the face-down output tray, or remove each page 
as soon as it comes out of the printer.
 
ePut paper in the MP tray. Make sure that the paper stays under the maximum paper mark (1). The side 
to be printed on must be face up with the leading edge (top of the paper) in first.
 
fWhile pressing the paper-guide release lever, slide the paper guide to fit the paper size. 
gSend the print data to the printer.
1
 

Printing Methods
17
2
Printing on thick paper, labels and envelopes2
(For the recommended paper to use, see About paperon page 6 and Types of envelopeson page 8.)
aChoose the following from the printer driver:
Paper Size............................ (1)
Media Type........................... (2)
Paper Source....................... (3)
and any other settings.

Windows
® printer driver
 

BR-Script printer driver (HL-4050CDN / HL-4070CDW only)
  
1
2
3
1
2
3
 

Printing Methods
18
2
Note
 To use the BR-Script printer driver you must install the driver using the Custom Install from the 
CD-ROM.
 When you use Envelope #10, choose Com-10 for the Paper Size.
 For other envelopes which are not listed in the printer driver, such as Envelope #9 or Envelope C6, 
choose User Defined... (For more information on envelope sizes, see Paper sizeon page 178.)
 

Macintosh® printer driver
Paper Size........................ (1)
Media Type...................... (2)
Paper...

Printing Methods
19
2
cPull out the MP tray support and unfold the flap (1). 
dLift up the support flap to prevent paper from sliding off the face-down output tray, or remove each page 
as soon as it comes out of the printer.
 
ePut paper in the MP tray. Make sure that the paper stays under the maximum paper mark (1). 
Note
 Do not put more than 3 envelopes in the MP tray.
 Envelope joints that are sealed by the manufacturer should be secure.
 The side to be printed on must be face up.
 All sides of...

Printing Methods
20
2
fWhile pressing the paper-guide release lever, slide the paper guide to fit the paper size. 
gSend the print data to the printer.
Note
 Remove each sheet or envelope at once after printing. Stacking the sheets or envelopes may cause the 
paper to jam or curl.
 If envelopes get smudged during printing set the Media Type to Thick Paper or Thicker Paper to 
increase the fixing temperature. 
 If the envelope is creased after they are printed, see Improving the print qualityon page...

Printing Methods
21
2
Duplex printing2
The supplied printer drivers for Windows® 2000/XP/XP Professional x64 Edition, Windows Vista™, Windows 
Server
® 2003/Windows Server® 2003 x64 Edition and Mac OS® X 10.2.4 or greater all enable duplex printing. 
For more information about how to choose the settings, see the Help text in the printer driver.
Guidelines for printing on both sides of the paper2

If the paper is thin, it may wrinkle.

If paper is curled, straighten it and then put it back in the paper...