Brother Hl 3260n User Manual

CHAPTER 1 ABOUT THIS PRINTER
1-17
Paper types to avoid
Some types of paper might not perform well or may cause damage to your
printer.
Types of paper to avoid are:
1. Highly textured paper.
2. Smooth or shiny paper.
3. Paper that is coated or has a chemical finish.
4. Damaged, wrinkled or prefolded paper.
5. Paper exceeding the recommended weight specified in this manual.
6. Paper with tabs and staples.
7. Letterheads using low temperature dyes or thermography.
8. Multipart or carbonless paper.
DAMAGE OR...

1-18
P P
r r
i i
n n
t t
i i
n n
g g
   
m m
e e
t t
h h
o o
d d
s s
This printer has various printing methods.
Choose the best printing method that you require for your print job.
♦ To print from the standard paper tray 1 or 2.
See “Loading Paper in the Standard paper tray” in this chapter.
♦ To print from the optional Multi-purpose tray
See “Multi-purpose tray” in chapter 4.
♦ To print from the optional Lower tray
See “Lower Tray Unit” in chapter 4.
 

CHAPTER 1 ABOUT THIS PRINTER
1-19
P P
a a
p p
e e
r r
   
h h
a a
n n
d d
l l
i i
n n
g g
Paper source Media
capacityMedia sizes Media types and weights
Paper tray 1500 sheets
(cut sheet)A3, 
JIS B4, Ledger,
A4, 
ISO B5, 
A5,
Legal, Letter,

ExecutivePlain paper
60 – 105 g/m2
 (16-28 lb)
Paper tray 2500 sheets
(cut sheet)A3, 
JIS B4, Ledger,
A4, 
ISO B5, 
A5,
A6, Legal, Letter,

Executive

Envelopes: Com10,
C5,     DL, MonarchPlain paper, Thick paper,
Transparencies
60 – 157 g/m2
 (16-42 lb)
✒
✒✒ ✒...

1-20
L L
o o
a a
d d
i i
n n
g g
   
p p
a a
p p
e e
r r
   
i i
n n
   
t t
h h
e e
   
s s
t t
a a
n n
d d
a a
r r
d d
   
p p
a a
p p
e e
r r
   
t t
r r
a a
y y
This section describes instructions for loading paper whose size and feed
direction is already set in the standard paper tray. If you want to change the
paper size or feed direction, see “Changing the paper size of the Paper tray”.
If you want to load paper in an Optional 500x2 Sheets Paper tray or Optional
2000 Sheets Paper tray, see...

CHAPTER 1 ABOUT THIS PRINTER
1-21
☛
☛☛ ☛ 2.Align all four sides of the paper stack, and load it into the Paper tray.
ZAEY030E 
Fig. 1-10
✒
✒✒ ✒  Note
• Do not stack paper over the limit mark.
• When you set custom size or thick paper in Paper tray 2, do not stack
paper above the lower limit mark () in Paper tray 2.
ZAEY052E 
Fig. 1-11
• Set the paper after shuffling the sheets.
• Load paper face up into the Paper tray.
☛
☛☛ ☛ 3.Slide the Paper tray into the printer until it stops.
 

1-22
C C
h h
a a
n n
g g
i i
n n
g g
   
t t
h h
e e
   
p p
a a
p p
e e
r r
   
s s
i i
z z
e e
   
o o
f f
   
t t
h h
e e
   
P P
a a
p p
e e
r r
   
t t
r r
a a
y y
For more information about the size and feed direction of paper that can be
set in the Paper tray, see “Print media and sizes” in this chapter.
☛
☛☛ ☛ 1.Slide the Paper tray out until it stops.
ZAEY012E 
Fig. 1-12
☛
☛☛ ☛ 2.Set the Paper guide lock to the “unlocked” position.
ZAEY013E 
Fig. 1-13
!Caution
Confirm that the lever of the paper...

CHAPTER 1 ABOUT THIS PRINTER
1-23
☛
☛☛ ☛ 3.Slide the side paper guide wide open () while pressing the release lever of
the side guide ().
1
2
ZAEY021E 
Fig. 1-14
☛
☛☛ ☛ 4.Slide the rear guide fully to the left while pressing the release lever of the
rear guide.
ZAEY034E 
Fig. 1-15
☛
☛☛ ☛ 5.Align all four sides of the paper stack, and load it into the Paper tray.
ZAEY030E 
Fig. 1-16
 

1-24
✒
✒✒ ✒  Note
• Do not stack paper over the limit mark.
• When you set thick paper in Paper tray 2, do not stack paper above the
lower limit mark () in Paper tray 2.
ZAEY052E 
Fig. 1-17
• Fan the paper before setting it in the Paper tray.
• Load paper face up into the Paper tray.
☛
☛☛ ☛ 6.Align the side guide to the loaded paper size () while pressing the release
lever of the side guide ().
1
2
ZAEY031E 
Fig. 1-18
☛
☛☛ ☛ 7.Set the paper guide lock to the “locked position”.
ZAEY032E 
Fig. 1-19
 

CHAPTER 1 ABOUT THIS PRINTER
1-25
☛
☛☛ ☛ 8.Align the rear guide to the loaded paper size while pressing the release lever
of the rear guide.
ZAEY033E 
Fig. 1-20
☛
☛☛ ☛ 9.Adjust the paper size dial in the paper tray for the loaded paper size.
ZAEY050E 
Fig. 1-21
✒
✒✒ ✒  Note
• Confirm that the setting of the paper size dial matches the paper size
and feed direction of the paper in the Paper tray, otherwise paper
misfeeds or unexpected printing results might occur.
• Confirm that the paper size dial...

1-26
♦ Setting the Media from the Printer driver
☛
☛☛ ☛ 1.Open the File menu and choose print.
☛
☛☛ ☛ 2.Open Properties and choose the Paper tab.
☛
☛☛ ☛ 3.Choose the paper size you want to use.
Fig. 1-23
3