Brother Gt3 Manual

 
 
GT-3 Series 
4. Printing Directly from Applications
41
Photoshop CS4/CS5 
Make print options as follows, go to [Page Setup...] > [Printer Settings] to do Printer Driver settings, and then click “Print” . 
  Color Management: Document 
  Color Handling: Printer Manages Colors 
  Rendering Intent: Rela tive Colorimetric 
 
 
Photoshop CS4/CS5 
< Note> 
z  Do not check “Print to File on Print window to make  print files. Use GT-3 FileOutput Printer Driver. 
z  Photoshop CS2 and CS3 use lots of PC memo...

 
  
GT-3 Series 
4. Printing Directly from Applications 
42 
Color Swatch in Useful Tools:   
(1)  See 3-3-7. Opening the Useful Tools and download Photoshop Color Swatch (called palette in CorelDRAW) 
GT_Colors_T.aco. 
(2)  Select [ Window ] and check [ Swatches ] to show. Click the  little triangle at the right top of the window (in the orange 
circle below) to show the submenu. 
    
 
Photoshop CS2 
 
(3)  Select [ Replace Swatches... ] and  select file GT_Colors_T.aco.   
The swatch replaced. Use...

 
 
GT-3 Series 
4. Printing Directly from Applications
43
Change RGB=255 bitmap white to RGB=254:   
RGB=255 (paper color) white is always transparent with no ink printed. When you print an image like photo, there may be 
RGB=255 white spots and they will be ink holes. Normally you can select RGB=255 white directly with the menu in select and 
replace to RGB=254 white. If you can not select directly RGB=255 in the image, follow the steps below to change RGB=255 
white to RGB=254 white.   
(1)  Select [...

 
  
GT-3 Series 
4. Printing Directly from Applications 
44 
4-2-4. Settings for Adobe Illustrator 
 
z  Set either Brother GT-3 or Brother  GT-3 FileOutput as the default printer bef ore you go on to the following steps, 
otherwise, an image may be printed incorrectly. Check the print dat a by the preview by using Brother GT-3 FileOutput. 
z   GT-3 is an RGB printer. Make the print data in RGB Color mode to get the best Color accuracy. In CMYK color mode 
artwork may be printed dark and unclear....

 
 
GT-3 Series 
4. Printing Directly from Applications
45
Opening the new file: Set the New Document settings as follows:   
Width: 14 in (355.6 mm) 
Height: 16 in (406.4 mm) 
Orientation: Portrait 
Color Mode: RGB Color
 
 
 
Printing: 
(1)  Click [ File ] > [ Print ] menu. 
(2)  Illustrator 10/CS:  Make sure the following settings. 
Source Space is either sRGB  IEC61966-2.1 or Untagged RGB.   
Print Space/ Profile:  Same As Source 
Click Properties (Illustrator 10) or Setup  (Illustrator CS) to do...

 
  
GT-3 Series 
4. Printing Directly from Applications 
46 
Illustrator CS2/CS3/CS4/CS5: Make sure the following settings. 
Document Profile and Printer Profile are ei ther sRGB IEC61966-2.1 or Untagged RGB. 
Color Handling: Let Illustrator determine Colors 
Rendering Intent: Rela tive Colorimetric 
Click Setup to do Printer Driver Settings. 
 
Illustrator CS 2/CS3/CS4/CS5  

 
 
GT-3 Series 
4. Printing Directly from Applications
47
Color Swatch in Useful Tools:   
(1)  See 3-3-7. Opening the Useful Tools and download Illustrator Color swatch GT_Colors_T.ai. 
(2)  Select [ Window ] and check [ Swatches ] to show. Click the  little triangle at the right top of the window (in the orange 
circle below) to show the submenu. Select [ Open Swatch  Library ] and [ Other Library ... ] at the bottom.   
    
 
Illustrator CS 
(3) Select GT_Colors_T.ai.   The swatch replaced. Use them...

 
  
GT-3 Series 
4. Printing Directly from Applications 
48 
z  An image that is smaller than 14 x 16 inches (e.g. a lette r-size image) may not be printed on proper positions, or 
may result in errors. If this happens follow the steps below to correct. 
(1)  Open Document Setup on File menu. 
(2) Select Artboard. 
(3)  Check Use Print Setup, and then click Print Setup….  The Print Setup window appears. 
If Platen 14x16 is selected for Size, tempora lly change it to Platen 10x12, and then click “OK”....

 
 
GT-3 Series 
4. Printing Directly from Applications
49
4-2-5. Settings for Adobe Photoshop Elements 
Color settings and print settings are required before printing. After the printer driver is installed, set the Colors before editing the 
document. 
 
Color settings: 
(1)  Select Color Sett ings... on Edit menu. 
The Color Settings window appears. 
(2)  Select Limited Color management or Always Optimi ze Colors for Computer Screens and then click “OK”. 
 
Photoshop Elements 3 (English Version)...

 
  
GT-3 Series 
4. Printing Directly from Applications 
50 
Printing 
Refer to Photoshop page in 4-2-3. Settings for Adobe Photoshop.   
(1)  Select [ File ] > [ Print... ] menu. The Print Preview window appears. 
(2)  Do the settings as follows:   
Show More Options: Check 
Print Space/ Profile: Printer Color Management 
(3)  Click Properties on Print dial og to do Printer Driver settings. 
 
Color Palette (swatch) in install CD: 
Color Palette GT_Colors_T.aco is available for Photos hop Element. See...