Brother DCP 750CW User Manual
Here you can view all the pages of manual Brother DCP 750CW User Manual. The Brother manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 51
Printing photos from a memory card 43 5 Print Quality5 aPress a or b to choose Print Quality. Press OK. bPress a or b to choose Normal or Photo. Press OK. cIf you do not want to change additional settings, press Colour Start to print. Paper options5 Paper Type5 aPress a or b to choose Paper Type. Press OK. bPress a or b to choose the type of paper you are using, Plain Paper, Inkjet Paper, Brother Photo or Other Photo. Press OK. cIf you do not want to change additional settings, press Colour...
Page 52
Chapter 5 44 dIf you do not want to change additional settings, press Colour Start to print. Adjusting Brightness, Contrast and Colour5 Brightness5 aPress a or b to choose Brightness. Press OK. bPress a or b to make a lighter or darker print. Press OK. cIf you do not want to change additional settings, press Colour Start to print. Contrast5 You can choose the contrast setting. More contrast will make an image look sharper and more vivid. aPress a or b to choose Contrast. Press OK. bPress a or b...
Page 53
Printing photos from a memory card 45 5 Cropping5 If your photo is too long or wide to fit the available space on your chosen layout, part of the image will automatically be cropped. The factory setting is On. If you want to print the whole image, turn this setting to Off. aPress a or b to choose Cropping. Press OK. bPress a or b to choose Off (or On). Press OK. cIf you do not want to change additional settings, press Colour Start to print. Cropping: On 5 Cropping: Off 5 Borderless printing5 This...
Page 54
Chapter 5 46 Scan to Card 5 Entering Scan mode5 When you want to scan to card, press (Scan). The LCD shows: Press a or b to choose Scan to Card. press OK. If you are not connected to your computer only the Scan to Card selection will appear on the LCD. (See Software User’s Guide for details about the other menu options.) How to scan to card5 You can scan monochrome and colour documents into a memory card. Monochrome documents will be stored in PDF (*.PDF) or TIFF file formats (*.TIF). Colour...
Page 55
Printing photos from a memory card 47 5 Understanding the Error Messages 5 Once you are familiar with the types of errors that can occur while you are using the PhotoCapture Center™, you can easily identify and troubleshoot any problems. „Media Error This message will appear if you put in a media card that is either bad or not formatted, or when there is a problem with the media drive. To clear this error, take out the media card. „No File This message will appear if you try to access a media...
Page 56
48 6 Your Brother machine supports the PictBridge standard, allowing you to connect to and print photos directly from any PictBridge compatible digital camera. Before Using PictBridge 6 PictBridge requirements6 To avoid errors, remember the following points: „The machine and the digital camera must be connected using a suitable USB cable. „The image file extension must be .JPG (Other image file extensions like .JPEG, .TIF, .GIF and so on will not be recognized). „PhotoCapture Center operations...
Page 57
Printing photos from a camera with PictBridge 49 6 Printing Images6 Note Remove any memory cards from the machine before connecting the digital camera. aMake sure that your camera is turned off. Connect your camera to the PictBridge port (1) on the machine using the USB cable. 1 PictBridge port bTurn on the camera. When the machine has recognized the camera, the LCD shows Camera Connected. When the machine starts printing a photo, the LCD will show Printing. WARNING To prevent damage to your...
Page 58
Chapter 6 50 Understanding the Error Messages 6 Once you are familiar with the types of errors that can occur while you are using PictBridge, you can easily identify and troubleshoot any problems. „Out of Memory This message will appear if you are working with images that are too large for the machines memory. „Wrong USB device This message will appear if you connect a non-PictBridge compatible or broken device to the PictBridge port. To clear the error, unplug the device from the PictBridge...
Page 60
52 7 The CD-ROM includes the Software User’s Guide and Network User’s Guide (DCP-540CN and DCP-750CW only) for features available when connected to a computer (for example, printing and scanning). The guide has easy to use links that, when clicked, will take you directly to a particular section. You can find information on these features: „Printing „Scanning „ControlCenter3 (for Windows ®) „ControlCenter2 (for Macintosh ®) „Network Scanning (DCP-540CN and DCP-750CW only) „PhotoCapture Center™...