Brother Dcp 383c User Manual

Printing photos from a camera53
6
Printing Images6
Note
Remove any memory cards or USB Flash 
memory drive from the machine before 
connecting a digital camera.
 
aMake sure that your camera is turned 
off. Connect your camera to the USB 
direct interface (1) on the machine using 
the USB cable.
 
1 USB direct interface
bTurn on the camera.
When the machine has recognized the 
camera, the LCD shows 
Camera Connected.
cChoose the photo you want to print 
following the instructions from your 
camera.When...

Chapter 6
54
Printing Images6
Note
Remove any memory cards or USB Flash 
memory drive from the machine before 
connecting a digital camera.
 
aMake sure that your camera is turned 
off. Connect your camera to the USB 
direct interface (1) on the machine using 
the USB cable.
 
1 USB direct interface
bTurn on the camera.
cFollow the steps in  Print Images 
on page 37.
WARNING 
To prevent damage to your machine, do not 
connect any device other than a digital 
camera or USB Flash memory drive to the 
USB...

Section IV
SoftwareIV
Software and Network features56
 

56
7
The CD-ROM includes the Software User’s 
Guide and Network User’s Guide 
(DCP-585CW only) for features available 
when connected to a computer (for example, 
printing and scanning). The guide has easy to 
use links that, when clicked, will take you 
directly to a particular section.
You can find information on these features:„ Printing
„ Scanning
„ ControlCenter3 (for Windows
®)
„ ControlCenter2 (for Macintosh
®)
„ PhotoCapture Center™
„ Network Printing (DCP-585CW only) 
„ Network Scanning...

Section V
AppendixesV
Safety and Legal58
Troubleshooting and Routine Maintenance67
Menu and Features87
Specifications101
Glossary114
 

58
A
Choosing a locationA
Put your machine on a flat, stable surface that is free of vibration and shocks, such as a desk. Put 
the machine near a standard grounded electrical socket. Choose a location where the 
temperature remains between 10°C and 35 °C.
WARNING 
DO NOT put the machine near heaters, air conditioners, refrigerators, medical equipment, 
chemicals or water. 
  
DO NOT connect your machine to electrical sockets on the same circuit as large appliances or 
other equipment that might disrupt...

Safety and Legal59
A
To use the machine safelyA
Please keep these instructions for later reference and read them before attempting any 
maintenance.
WARNING 
There are high voltage electrodes inside the machine. Before you clean the inside of the 
machine, make sure you have unplugged the power cord from the electrical socket. Doing this 
will prevent an electrical shock.
 
 
 
DO NOT handle the plug with wet hands. Doing this may cause an electrical shock.
 
 
 
DO NOT pull on the middle of the AC...

60
 
DO NOT put your hands on the edge of the paper tray under the paper tray cover. Doing this 
may cause injury.
 
 
 
DO NOT touch the area shaded in the illustration. Doing this may cause injury. 
 
 
When moving the machine you must lift it from the base, by placing a hand at each side of the 
unit as shown in the illustration. DO NOT carry the machine by holding the scanner cover or the 
Jam Clear Cover.
  
 
 

Safety and Legal61
A
 
DO NOT use flammable substances, any type of spray liquid or aerosol cleaners to clean the 
inside or outside of the machine. Doing this may cause a fire or electrical shock.
 
 
 
If the machine becomes hot, releases smoke, or generates any strong smells, immediately turn 
off the power switch and unplug the machine from the electrical socket. Call your Brother dealer 
or Brother Customer Service.
  
If metal objects, water or other liquids get inside the machine, immediately...

62
Important safety instructionsA
1 Read all of these instructions.
2 Save them for later reference.
3 Follow all warnings and instructions marked on the product.
4 DO NOT use this product near water.
5 DO NOT place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product.
6 Slots and openings in the cabinet and the back or bottom are provided for ventilation. To  ensure reliable operation of the product and to protect it from overheating, these...