Brother DCP 195C User Manual

							
43
6
6
Printing photos 
directly from a 
PictBridge camera
6
 
Your Brother machine supports the 
PictBridge standard, allowing you to connect 
to and print photos directly from any 
PictBridge compatible digital camera.
If your camera is using the USB Mass 
Storage standard, you can also print photos 
from a digital camera without PictBridge. See 
Printing photos directly from a digital camera 
(without PictBridge)  on page 45. 
PictBridge requirements6
To avoid errors, remember the following 
points:
„ The machine and the digital camera must 
be connected using a suitable USB cable.
„ The image file extension must be .JPG 
(other image file extensions like .JPEG, 
.TIF, .GIF and so on will not be 
recognized).
„ PhotoCapture Center™ operations are 
not available when using the PictBridge 
feature.
Setting your digital camera6
Make sure your camera is in PictBridge 
mode. The following PictBridge settings may 
be available from the LCD of your PictBridge 
compatible camera.
Depending on your camera some of these 
settings may not be available.
1See  DPOF printing  on page 44 for more details.
2If your camera is set to use the Printer Settings 
(Default setting), the machine will print your photo 
using the following settings.
Printing photos from a camera 
(DCP-193C, DCP-195C, 
DCP-197C, DCP-365CN only)
6
Camera Menu 
Selections Options
Paper Size Letter, A4, 10 ×15 cm, 
Printer Settings (Default 
setting)
2
Paper Type Plain Paper, Glossy  Paper, Inkjet Paper, 
Printer Settings (Default 
setting)
2
Layout Borderless: On, Borderless: Off, Printer 
Settings (Default setting)
2
DPOF setting1-
Print Quality Normal, Fine, Printer  Settings (Default setting)
2
Colour 
EnhancementOn, Off, Printer Settings 
(Default setting)
2
Date Print On, Off, Printer Settings 
(Default setting)
2
Downloaded from ManualsPrinter.com Manuals 
						

							
Chapter 6
44
„ When your camera does not have any 
menu selections, this setting is also used.
„ The names and availability of each setting 
depends on the specification of your 
camera.
Please refer to the documentation supplied 
with your camera for more detailed 
information on changing PictBridge settings.
Printing Images6
Note
Remove any memory cards or USB Flash 
memory drive from the machine before 
connecting a digital camera.
 
aMake sure that your camera is turned 
off. Connect your camera to the USB 
direct interface (1) on the machine using 
the USB cable.
 
1 USB direct interface
bTurn on the camera.
When the machine has recognized the 
camera, the LCD shows the following 
message:
 
Camera Connected
cChoose the photo you want to print 
following the instructions from your 
camera.
When the machine starts printing a 
photo, the LCD will show  Printing.
IMPORTANT
To prevent damage to your machine, do 
not connect any device other than a digital 
camera or USB Flash memory drive to the 
USB direct interface.
 
DPOF printing6
DPOF stands for Digital Print Order Format.
Major digital camera manufacturers (Canon 
Inc., Eastman Kodak Company, FUJIFILM 
Corporation, Panasonic Corporation and 
Sony Corporation) created this standard to 
make it easier to print images from a digital 
camera.
If your digital camera supports DPOF 
printing, you will be able to choose on the 
digital camera display the images and 
number of copies you want to print.
Note
A DPOF File error can occur if the print 
order that was created on the camera has 
been corrupted. Delete and recreate the 
print order using your camera to correct 
this problem. For instructions on how to 
delete or recreate the print order, refer to 
your camera manufacturer’s support 
website or accompanying documentation.
 
Settings Options
Paper Size 10 ×15 cm
Paper Type Glossy Paper
Layout Borderless: On
Print Quality Fine
Colour 
Enhancement Off
Date Print Off
1
Downloaded from ManualsPrinter.com Manuals 
						

							
Printing photos from a camera (DCP-193C, DCP-195C, DCP-197C, DCP-365CN only)45
6
Printing photos 
directly from a digital 
camera (without 
PictBridge)
6
If your camera supports the USB Mass 
Storage standard, you can connect your 
camera in storage mode. This enables you to 
print photos from your camera.
If you would like to print photos in PictBridge 
mode, see Printing photos directly from a 
PictBridge camera  on page 43.
Note
The name, availability and operation differ 
among digital cameras. Please refer to the 
documentation supplied with your camera 
for detailed information, such as how to 
switch from PictBridge mode to USB mass 
storage mode.
 
Printing Images6
Note
Remove any memory cards or USB Flash 
memory drive from the machine before 
connecting the digital camera.
 
aConnect your camera to the USB direct 
interface (1) on the machine using the 
USB cable.
 
1 USB direct interface
bTurn on the camera.
cFollow the steps in  Printing Photos 
on page 34.
IMPORTANT
To prevent damages to your machine, do 
not connect any device other than a digital 
camera or USB Flash memory drive to the 
USB direct interface.
 
1
Downloaded from ManualsPrinter.com Manuals 
						

							
Chapter 6
46
Understanding the 
Error Messages
6
Once you are familiar with the types of errors 
that can occur while you are using a digital 
camera, you can easily identify and 
troubleshoot any problems. „ Out of Memory
This message will appear if you are 
working with images that are too large for 
the machines memory.
„ Unusable Device
This message will appear if you connect a 
camera which is not using the USB Mass 
storage standard. This message can also 
appear if you connect a broken device to 
the USB direct interface.
For more detailed solutions see  Error and 
Routine Maintenance messages  on page 64.
Downloaded from ManualsPrinter.com Manuals 
						

							
Section IV
SoftwareIV
Software and Network features48
Downloaded from ManualsPrinter.com Manuals 
						

							
48
7
Note
Network User’s Guide is only available 
for DCP-365CN, DCP-373CW, 
DCP-375CW and DCP-377CW.
 
The CD-ROM includes the Software User’s 
Guide and Network User’s Guide for features 
available when connected to a computer (for 
example, printing and scanning). The guide 
has easy to use links that, when clicked, will 
take you directly to a particular section.
You can find information on these features:
„ Printing
„ Scanning
„ ControlCenter3 (Windows
®)
„ ControlCenter2 (Macintosh)
„ PhotoCapture Center™ 
„ Network Printing
„ Network Scanning
„ Wired and Wireless Network
How to read the HTML User’s Guide 
This is a quick reference to use the HTML 
User’s Guide.
For Windows
®
Note
If you have not installed the software, see 
Viewing Documentation  on page 3.
 
aFrom the Start menu, point to  Brother, 
DCP-XXXX  (where XXXX is your model 
number) from the programs group, then 
click  User’s Guides in HTML format .
bClick SOFTWARE USER’S GUIDE  (or 
NETWORK USER’S GUIDE ) from the 
top menu.
 
cClick the heading you would like to view 
from the list at the left of the window.
 
For Macintosh
aMake sure your Macintosh is turned on. 
Insert the Brother CD-ROM into your 
CD-ROM drive.
bDouble-click the  Documentation icon.
cDouble-click your language folder, and 
then double-click  top.html.
dClick SOFTWARE USER’S GUIDE (or 
NETWORK USER’S GUIDE) in the top menu, 
and then click the heading you would like to 
read from the list at the left of the window.
 
Software and Network features7
Downloaded from ManualsPrinter.com Manuals 
						

							
Section V
AppendixesV
Safety and Legal50
Troubleshooting and Routine Maintenance59
Menu and Features81
Specifications93
Downloaded from ManualsPrinter.com Manuals 
						

							
50
A
Choosing a locationA
Put your machine on a flat, stable surface that is free of vibration and shocks, such as a desk. Put 
the machine near a standard, grounded electrical socket. Choose a location where the 
temperature remains between 10°C and 35 °C.
WARNING 
DO NOT put the machine near heaters, air conditioners, refrigerators, medical equipment, 
chemicals or water.
  
DO NOT connect your machine to electrical sockets on the same circuit as large appliances or 
other equipment that might disrupt the power supply.
 
CAUTION 
• Avoid placing your machine in a high-traffic area.
• Avoid placing your machine on a carpet.
• DO NOT expose the machine to direct sunlight, excessive heat, moisture, or dust.
• DO NOT connect your machine to electrical sockets controlled by wall switches or automatic 
timers.
• Disruption of power can wipe out information in the machines memory.
• DO NOT tip the machine, or place it on any tilted surface. Doing this may cause ink spillage  and internal damage to your machine.
 
Safety and LegalA
 
Downloaded from ManualsPrinter.com Manuals 
						

							
Safety and Legal51
A
To use the machine safelyA
Please keep these instructions for later reference and read them before attempting any 
maintenance.
WARNING 
There are high voltage electrodes inside the machine. Before you clean the inside of the 
machine, make sure you have unplugged the power cord from the electrical socket. Doing this 
will prevent an electrical shock.
 
 
 
DO NOT handle the plug with wet hands. Doing this might cause an electrical shock.
 
 
 
DO NOT pull in the middle of the power cord. Doing this might cause an electrical shock.
  
DO NOT use flammable substances, any type of spray, liquid or aerosol cleaners to clean the 
inside or outside of the machine. Doing this may cause a fire or electrical shock.
  
If the machine becomes hot, releases smoke, or generates any strong smells, immediately 
unplug the machine from the electrical socket. Call your Brother dealer or Brother Customer 
Service. 
 
Downloaded from ManualsPrinter.com Manuals 
						

							
52
 
If metal objects, water or other liquids get inside the machine, immediately unplug the machine 
from the electrical socket. Call your Brother dealer or Brother Customer Service. 
  
This product must be installed near an electrical socket that is easily accessible. In case of an 
emergency, you must unplug the power cord from the electrical socket to shut off the power 
completely.
 
 
This product should be connected to an AC power source within the range indicated on the 
rating label. DO NOT connect it to a DC power source or inverter. If you are not sure, contact a 
qualified electrician.
  
Always make sure the plug is fully inserted.
  
DO NOT use the machine if the power cord is frayed or damaged, doing so may cause a fire.
 
Downloaded from ManualsPrinter.com Manuals