Home > Brother > Software > Brother Control Center 3 User Guide

Brother Control Center 3 User Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Brother Control Center 3 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 331 Brother manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Firewall settings (For Network users) 
    115
    7
    dClick the New Rule. 
    eChoose Port and click Next.
    fTo add port enter the information below:
    For network scanning
    Choose UDP and enter “54925” in the Specific local ports.
    Click Next.
    For Network PC-Fax
    Choose UDP and enter “54926” in the Specific local ports.
    Click Next.
     
    gChoose Allow the connection and click Next. 
    						
    							Firewall settings (For Network users) 
    116
    7
    hCheck the applicable items and click Next.
    iEnter any description in Name: (for example “Brother Scanner” or “Brother PC-Fax”) and click Finish. 
    jMake sure that the new setting is added and is checked.
    kClick the Outbound Rules.  
    						
    							Firewall settings (For Network users) 
    117
    7
    lClick the New Rule. 
    mChoose Port and click Next.
    nTo add port enter the information below:
    For network scanning
    Choose UDP and enter “54925” in the Specific remote ports.
    Click Next.
    For Network PC-Fax
    Choose UDP and enter “54926” in the Specific remote ports.
    Click Next.
     
    oChoose Allow the connection and click Next. 
    						
    							Firewall settings (For Network users) 
    118
    7
    pCheck the applicable items and click Next.
    qEnter any description in Name: (for example “Brother Scanner” or “Brother PC-Fax”) and click Finish. 
    rMake sure that the new setting is added and is checked. 
    						
    							Section II
    Apple MacintoshII
    Printing and Faxing120
    Scanning139
    ControlCenter2154
    Remote Setup & PhotoCapture Center®173 
    						
    							120
    8
    8
    Setting up your Macintosh8
    Note
    • The screens shown in this section are from Mac OS X 10.5.x. Screens on your Macintosh may 
    vary depending on your operating system and application.
    • Before you can connect the machine to your Macintosh, you need to purchase a USB cable (type A/B) that 
    is no longer than 6 feet (2 meters).
     
    IMPORTANT
    DO NOT connect the machine to a USB port on a keyboard or a non-powered USB hub.
     
    Choosing the right type of paper8
    For high quality printing, it is important to choose the right type of paper. Be sure to read Loading paper in the 
    Basic User’s Guide before buying paper.
    Simultaneous printing, scanning and faxing8
    Your machine can print from your Macintosh while sending or receiving a fax in memory, or while scanning 
    a document into the Macintosh Fax sending will not be stopped during Macintosh printing.
    However, when the machine is copying or receiving a fax on paper, it pauses the Macintosh printing 
    operation, and then continues printing when copying or fax receiving has finished.
    Clearing data from the memory8
    If the LCD shows Data Remaining, you can clear the data that is left in the printer memory by pressing 
    Stop/Exit key on the control panel.
    Printing and Faxing8 
    						
    							Printing and Faxing 
    121
    8
    Status Monitor8
    The Status Monitor utility is a configurable software tool for monitoring the status of the machine, letting you 
    see error messages such as paper empty, paper jam or ink replacement required at pre-set update intervals. 
    Before you can use the tool you must choose your machine in the Model pop-up menu in ControlCenter2.
    You can check the device status by clicking the Ink Level icon in the DEVICE SETTINGS tab of 
    ControlCenter2 or by choosing Brother Status Monitor located in 
    Macintosh HD/Library/Printers/Brother/Utilities.
    Updating the machine’s status
     If you want the latest machine status while the Status Monitor window is open, click the update 
    button (1).
     
    You can set at what interval the software will update the machine status information. Go to the menu bar, 
    Brother Status Monitor and choose Preferences.
    Hiding or showing the window
    After starting the Status Monitor, you can hide or show the window. To hide the window, go to the menu 
    bar, Brother Status Monitor and choose Hide Status Monitor. To show the window, click the 
    Status Monitor icon in the dock or click the Ink Level button in the DEVICE SETTINGS tab of 
    ControlCenter2.
     
    Quitting the window
    Click Brother Status Monitor in the menu bar and then choose Quit Status Monitor from the pop-up 
    menu.
    1 
    						
    							Printing and Faxing 
    122
    8
    Using the Brother Ink driver8
    Choosing page setup options8
    aFrom an application such as Apple TextEdit, click File, then Page Setup. Make sure 
    Brother MFC-XXXX (where XXXX is your model name) is chosen in the Format for pop-up menu. You 
    can change the settings for Paper Size, Orientation and Scale, then click OK.
     
    bFrom an application such as Apple TextEdit, click File, then Print to start printing.
    (Mac OS X 10.4.11)
     
    (Mac OS X 10.5.x to 10.6.x)
    For more page setup options, click the disclosure triangle beside the Printer pop-up menu.
      
    						
    							Printing and Faxing 
    123
    8
     
    To do borderless printing8
    From the Paper Size pop-up menu, choose the size of paper you want to print such as Letter (Borderless).
    Choosing printing options8
    To control special printing features, choose Print Settings in the Print dialog box.
      
    						
    							Printing and Faxing 
    124
    8
    Basic settings8
    You can choose the Media Type, Slow Drying Paper, Quality and Color Mode settings.
     
    Note
    Check Slow Drying Paper when printing with plain paper on which ink dries slowly. This setting may 
    cause some slight blurring of text.
     
    Media Type8
    To achieve the best print results, the media being printed on should be selected in the driver. The machine 
    changes the way it prints depending on the selected media type.
    Plain Paper
    Inkjet Paper
    Brother BP71 Photo Paper
    Brother BP61 Photo Paper
    Other Photo Paper
    Transparencies 
    						
    All Brother manuals Comments (0)