Boxlight Xd 10m Manual
Have a look at the manual Boxlight Xd 10m Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 257 Boxlight manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
33 If you’re using Windows 98: 1Open “My Computer” icon, the Control Panel folder and then the Display icon. 2Click the Settings tab. 3Verify that the Desktop area is set to 1280x1024 or less. Problem: Color or text not being projected You might need to adjust the brightness up or down until the text is visible. Refer to “Brightness” on page 17 for more infor- mation. Problem: The screen resolution is not right Make sure the computer ’s video card is set for a resolution of no greater than 1280x1024. Problem: Image isn’t centered on the screen Move the projector to reposition the image. Reposition the image using the menu. Refer to “Horizontal Position” on page 20 and “Vertical Position” on page 20. Be sure the projector lens is at a 90 degree angle to the screen. Problem: Image is too wide or narrow for screen Adjust the zoom or projector placement. Adjust the resolution of your video card if it’s greater than 1280x1024. Problem: Image is out of focus Turn the projection lens to focus the image. Make sure the projection screen is at least 5 feet (1.5 m) from the projector. Check the projection lens to see if it needs cleaning. Problem: Image and menus are reversed left to right Rear projection mode is probably turned on. Turn Rear Projec- tion off in the Controls menu. The image should immediately return to forward projection. See “Rear Projection” on page 23.
34 Maintenance & Troubleshooting Problem: the projector displays vertical lines, “bleeding” or spots Adjust the brightness. See “Brightness” on page 17. Check the projection lens to see if it needs cleaning. Problem: Image is “noisy” or streaked Try these steps in this order. 1Deactivate the screen saver on your computer. 2Tu r n Auto Image off and then back on again. See “Auto Image” on page 19. 3Tu r n Auto Image off and adjust the synchronization and track- ing manually to find an optimal setting. See “Manual Sync” on page 20 and “Manual Tracking” on page 20. The problem could be with your computer ’s video card. If possible, connect a different computer. Problem: Projected colors don’t match the computer or video player’s colors Just as there are differences in the displays of different moni- tors, there are often differences between the computer image and the projected image. Adjust the brightness, tint and/or contrast from the Display menu. See “Brightness” on page 17, “Tint” on page 18 and “Contrast” on page 18. Problem: Lamp seems to be getting dimmer The lamp begins to lose brightness when it has been in use for a long time. Replace the lamp as described in “Replacing the Projection Lamp” on page 27. Problem: Lamp shuts off A minor power surge may cause the lamp to shut off. Unplug the projector, wait at least a minute, then plug it back in. Make sure the vents are not blocked. Before calling B OXLIGHT for assistance, please have the following information available: the projector ’s serial number (located on the bottom label) the resolution of your computer. Call B OXLIGHT at 1-800-762-5757 or 360-779-7901
35 APPENDIX Specifications The projector must be operated and stored within the tempera- ture and humidity ranges specified. Te m p e r a t u r e Operating 50 to 104 ° F (10 to 40° C) at sea level 50 to 95 ° F (10 to 35° C) at 10,000 feet Non-operating -4 to 158 ° F (-20 to 70° C) Altitude Operating 0 to 10,000 feet (3,048 meters) Non-operating 0 to 20,000 feet (6,096 meters) Humidity Operating and non-oper. 10% to 95% relative humidity, non-condensing Dimensions 6.68 x 8.63 x 2 inches (16.9 x 21.9 x 5.1 cm) We i g h t 3.0 lbs. (1.36 kg) unpacked Optics Focus Range 4.9 - 16.4 feet (1.5-5 m) Lamp Type 120-watt UHP lamp Input Power Requirements 100-120VAC 2A;50/60Hz 200-240VAC 1A; 50Hz
36 Appendix Accessories NOTE: Use only BOXLIGHT- approved accessories. Other products have not been tested with the projector.Power Cords (one ships with projector, type depends on country)Standard Accessories (ship with the projector) Quick Start card User’s Guide Soft Case Shipping Box Analog Computer Cable 6 ft (1.8 m) Composite RCA Video Cable 6 ft (1.8 m) S-video Cable 6 ft (1.8 m) Remote Projection Lamp Module (included in projector) Lens Cap North American Power Cord Australian Power Cord UK Power Cord European Power Cord Japanese Power Cord
37 Optional Accessories Deluxe Travel Case Hard Travel Porter Case Projection Lamp Module Digital Computer Cable Digital/Analog Interface Card Macintosh Adaptor Executive Plus Remote Full-Feature LaserPro Remote Control B OXLIGHT GyroMouse Presenter RF Remote (US, Mexico, Canada, UK only) Executive Remote IR Receiver Remote Point RF Remote PC Guardian Projector Cable Lock 40” Portable Projection Screen 50” Portable Projection Screen 60” Deluxe Insta-Theatre Screen Portable Projector Stand
38 Appendix Portable and Laptop Activation Chart Many laptop computers do not automatically turn on their exter- nal video port when a projector is connected. Activation com- mands for some laptop computers are listed in the following table. (If your computer is not listed or the given command does not work, refer to the computer ’s documentation for the appro- priate command.) On many laptops, the activation function key is labeled with an icon, for example or the text CRT/LCD. NOTE: Usually, pressing the key commands once activates the external video port, pressing it again activates both the external and internal ports, and pressing it a third time activates the internal port. Refer to your computer’s documentation for details on your specific model. ComputerKey command to activate portKey command to de-activate port Acer Ctrl-Alt-Esc (for setup) Ctrl-Alt-Esc (for setup) AST* ** FN-D or Ctrl-D FN-D or Ctrl-D Ctrl-FN-D Ctrl-FN-D FN-F5 FN-F5 type from A:/IVGA/CRT type from A:/IVGA/CRT FN-F12 FN-F12 AMS FN-F2 FN-F2 AMT setup screen setup screen AT & T F N - F 3 FN-F6FN-F3 FN-F6 Advanced Logic ResearchCtrl-Alt-V Ctrl-Alt-V Altima Shift-Ctrl-Alt-C Shift-Ctrl-Alt-L setup VGA/ Conf.Simulscansetup VGA/ Conf.Simulscan Ambra** FN-F12 FN-F12 FN-F5 FN-F5 F2/Choose Option/F5 F2/Choose Option/F5 Amrel* ** setup menu setup menu Shift-Ctrl-D Shift-Ctrl-D Apple see Mac Portable and Mac PowerBook Aspen automatic automatic Award FN-F6 FN-F6 BCC* automatic reboot computer
39 Bondwell LCD or CRT options after bootupreboot for LCD or CRT options to appear Chaplet** setup screen setup screen FN-F6 FN-F6 FN-F4 FN-F4 Chembook FN-F6 FN-F6 Commax Ctrl-Alt-#6 Ctrl-Alt-#5 Compaq* ** Ctrl-Alt-< Ctrl-Alt-> FN-F4 FN-F4 automatic automatic mode/? (for setup option) mode/? (for setup option) Compuadd* ** automatic automatic Alt-F for screen setup optionAlt-F for screen setup option Data General Ctrl-Alt-Command Ctrl-Alt-Command Data General Wa l k a b o u t2 CRT/X at DOS prompt reboot Datavue Ctrl-Shift-M Ctrl-Shift-M DEC** FN-F5 FN-F5 FN-F4 FN-F4 Dell** Ctrl-Alt-< Ctrl-Alt-> Ctrl-Alt-F10 Ctrl-Alt-F10 FN-F8 (CRT/LCD) FN-F8 FN-D FN-D FN-F12 FN-F12 Digital* automatic reboot FN-F2 FN-F2 Dolch dip switch to CRT dip switch to LCD Epson dip switch to CRT dip switch to LCD Everex* setup screen option setup screen option For-A Ctrl-Alt-Shift-C Ctrl-Shift-Alt-L Fujitsu FN-F10 ComputerKey command to activate portKey command to de-activate port
40 Appendix Gateway FN-F3 FN-F1/FN-F1 again simul- taneousFN-F3 FN-F1 Grid* ** FN-F2, choose auto or simultaneousFN-F2 Ctrl-Alt-Tab Ctrl-Alt-Tab Hitachi FN-F7 FN-F7 Honeywell FN-F10 FN-F10 Hyundai setup screen option setup screen option IBM 970* automatic warm reboot IBM ThinkPad** reboot, enter setup menu FN-F2 FN-F7, select choice from setup menu FN-F1, select choice FN-F5, select choice PS/2 SC select choice (CRT, LCD, etc.) Infotel FN-F12 FN-F12 Kaypro boot up, monitor plugged inunplug monitor Kris Tech FN-F8 FN-F8 Leading Edge FN-T FN-T Mac Portable 100no video port: not compatible Mac PowerBook 140, 145, 150, 170no video port: requires a 3rd-party interface 160, 165, 180, 520, 540, 5300Control Panel folder, Pow- erBook Display folder; Activate Video Mirroringwarm reboot 210, 230, 250, 270, 280, 2300requires Apple Docking Station or Mini Dock Magitronic FN-F4 FN-F4 Mastersport FN-F2 FN-F1 ComputerKey command to activate portKey command to de-activate port
41 Micro Express* automatic warm reboot Micron FN-F2 FN-F2 Microslate* automatic warm reboot Mitsubishi SW2 On-Off-Off-Off SW2 Off-On-On-On NCR setup screen option setup screen option NEC* ** setup screen option setup screen option CRT at the DOS prompt LCD at the DOS prompt FN-F3 FN-F3 Olivetti* automatic automatic FN-O/* FN-O/* Packard Bell* ** FN-F0 FN-F0 Ctrl-Alt-< Ctrl-Alt-> Panasonic FN-F2 FN-F2 Prostar Ctrl-Alt-S at bootup Ctrl-Alt-S at bootup Samsung* setup screen option setup screen option Sanyo setup screen option setup screen option Sharp dip switch to CRT dip switch to LCD Sun SPARC- DataviewCtrl-Shift-M Ctrl-Shift-M Tandy** Ctrl-Alt-Insert Ctrl-Alt-Insert setup screen option setup screen option Tangent FN-F5 FN-F5 Texas Instru- ments*setup screen option setup screen option Top-Link* ** setup screen option setup screen option FN-F6 FN-F6 Toshiba* ** Ctrl-Alt-End Ctrl-Alt-Home FN-End FN-Home FN-F5 FN-F5 setup screen option setup screen option Twinhead* FN-F7 FN-F7 FN-F5 FN-F5 Automatic Automatic WinBook Ctrl-Alt-F10 Ctrl-Alt-F10 ComputerKey command to activate portKey command to de-activate port
42 Appendix * These manufacturers have models that automatically send video to the external CRT port when some type of display device is attached. ** These manufacturers offer more than one key command depend- ing on the computer model. Wyse software driven software driven Zenith** FN-F10 FN-F10 FN-F2 FN-F2 FN-F1 FN-F1 Zeos** Ctrl-Shift-D FN-F1Ctrl-Shift-D FN-F1 ComputerKey command to activate portKey command to de-activate port