Boxlight Projector Write 6 User Manual

69  MENU  
 
P r esentation   Menu   
  
Reset Lamp Timer  
 
The lamp timer  is the time counted after the last resetting. The usage time of the lamp 
is shown in the PRESENTATION Menu. Pressing the RESET button or the  ► button 
displays a dialog.  
 
To reset the lamp time, select the RESET using the  ► button.  
 
   
 
 
 
►NOTE  
The replacement warning message  is set  to appear after about 2000 hours of lamp use in order to 
maintain the initial brightness. When replacement message appears,...

70  MENU  
 
Security   Menu   
   
  
Step: 
  1. Use the ▲ /▼buttons to  
    select  an item. 
  2. Use the ◄ /  ► buttons  
to  select  an item or adjust 
the value.  
 
 
 
 
  Item   Selection  
Description  
 
 
 
 
 
PIN LOCK 
PROTECTION    
 
 
 
OFF 
ON 1  
ON 2   OFF:   T urn   o f f PIN lock   protection.  
ON 1:   After   plugging   in   AC powe r , you need   to   key   in   PIN 
code at the first   time of use. If the   AC power stays 
plugged,   you do not   need   to   key   in   PIN...

71  MENU  
 
Security   Menu  
Step:  
1.Use the  ▲   / ▼ buttons to  
select   an   item.  
2.Use the  ◄   /  ►   buttons to  
select   an   item   or adjust   the 
value.   
   
  
 
 
 
Item   Selection  Description  
FI L TER   TIMER  
  Show the filter   use hou r .  
RESET   FI L TER 
TIMER    
EXECUTE    
Reset the filter   timer after cleaning / changing filte r .  
 
FI L TER   COUNTER   500 hours  
800 hours  
1000 hours    
Select   (500 / 800 / 1000 hours) depending   on the 
environment...

72  MENU  
 
Security   Menu  
Step:  
1.Use the  ▲   / ▼ buttons to  
select   an   item.  
2.Use the  ◄   /  ►   buttons to  
select   an   item   or adjust   the 
value.   
   
  
 
 
 
Item   Selection  Description  
PROJEC T OR 
NAME   Default   is  
Projector   Projector   network   setting   display   which   shows bits   that   can 
be   recognized   by   ASCII.  
 
DHCP    
OFF / ON   When   setting   ON,  projectors   IP   address  will   be   assigned   by 
DHCP   server   automaticall y ....

73  MENU   
   
  
Auto Filter Alert  
Auto Filter Alert is in the SECURITY category and shows the air filter use time and 
alerts user to change the filter. Pressing  ► cursor button will display a dialog. When the 
operating time reaches the set time, a warning message will appear on the screen to 
remind user of filter cleaning / replacing.  
 
 
 
 
Filter Replace... 
  Filter has been used for more than 500 hours.  
 
 
 
 
 
 
 
► NOTE  
Please reset the Filter time only when you replace the...

74
9
1010
11
1312 14
151617
PIN Key In Operation
When the projector is turned on and the 
PIN LOCK PROTECTION is set to [ON], 
the image will show as on the right side.
1.  Press the MENU button on the projector 
or remote control. Enter PIN code by 
keypad or remote control.
2. How to enter a PIN code? 
You can use control panel or remote 
control.
CONTROL PANEL  REMOTE CONTROL The control panel and remote control buttons to enter a sequence 
of PIN code is like the photo below.
(1) Press ◄ button:...

75  Network Cont r ol   Softwa r e   Application   
   
to   utilize   this   function    
  
LAN 
 
 
 
 
 
 
 
 
 
 
Procedure  
 
It can  help user to monitor and manage the projector(s) status  in the local area network.  
  Register the projector(s) which needs 
to be  controlled.  
Auto search can help you to seek the projector(s) source easily.  
After registering  in the work group, you can start  to control the projector.  
  Group the projector(s) into 
different sections.  
You can monitor...

76  Network Cont r ol   Softwa r e   Application   
   
Browser Control  
Auto IP address setting (while DHCP setting  is ON):  
(1) Enable DHCP from the projector  on-screen-display menu, under SECURITY \ LAN SETTING. 
(2) Wait for the PC server  to release  IP address to the projector.  
(3)  Enter  Given  IP address  (For  example  http://192.168.1.176/) into  the  address  bar of  the  web  browser  and 
press “Enter”  key or click “Go” button.  
 
 
   
 
 
   
 
Item Setting description:  
  ITEM...

77  Network Cont r ol   Softwa r e   Application   
   
  
 
 
 
 
 ADMINISTRATOR    MODE 
User   name:  admin  
Password: (Default password setting is disabled.) 
 
 
 
 
 
 
Home (Status):  
Show current projector status and network 
configuration settings.  
 
    

78  Network Cont r ol   Softwa r e   Application   
   
 ITEM   ITEM  SETTING  DESCRIPTION  
Status   Projector   Name   Show   projector   name.  
  System   Status   Show   if   projector   is   Power   On   or   Inactive   .  
  Input  
Source   Show   current   input  source.  
  Lamp   Hours   Show   lamp   used   hours   on   current   projecto r .  
  Filter   Hours   Show   filter   used   hours   on   current   projecto r .  
W ired  
LAN   IP  Address   Show   current   IP   address   of...