Boxlight Projector Write 5 User Manual

79  Network Cont r ol   Softwa r e   Application   
   
Network:  
Set  up  network configuration and password from this page.
 
 
   
 
 
  ITEM  
SETTING  DESCRIPTION  
Network
 
DHCP   Assign   an   IP   address   to   the   projector   from   the   DHCP   server   automaticall y .  
IP 
Address   Set   up  IP  Address   when   DHCP   is   disabled.  
Subnet   Mask   Set   up   Subnet   Mask   when   DHCP   is   disabled.  
Gateway
  Set   up   Gateway   when   DHCP   is  disabled.  
DNS   Server...

80  Network Cont r ol   Softwa r e   Application   
   
Alert:  
Show  and  setup Alert  configurations.    
 
When  problem  occurs  to the projector,  it will  automatically  send  e-mail  to remind user. 
How  to  operate:  
1.  Enter  Email  setting  columns.  
2.  Enter  SMTP  setting  columns.  
3.  Select  Alert  Condition.  Multiple  choices  are  fine. 
4.  Press  Submit  to confirm.  
5.   After  completing  Alert  Setting  for  the  first  time,  it is   recommended  that  you  press  Issue...

81  Network Cont r ol   Softwa r e   Application   
   
  
Schedule:  
Show  and  set  up  Schedule,  including  “Weekly  Schedule ”  and  “Specific Da y”. 
  Weekly  Schedule  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
To  power  on and power  off  projector  based  on Weekly  Schedule.  
How  to set 
up: 
1.  Choose  week 
days. 
2.  Set  up  power- on or  power-off  time.  
(Please  be  sure  that  the interval  between  power- on  and  off  setting  is more  than  5 minutes.)  
3.  Enter  Input  Source  and...

82  Network Cont r ol   Softwa r e   Application   
   
  
Time:  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1. Current System Time Setting: Refresh the date/time on the webpage  if you click  
 
“Refresh” button. 
 
2. System Time Setting: To set the date/time manually  
 
Enter the Date in Month/Day/Y ear 
format. 
Enter
 the Time  in Hour/Minute/Second format.  
3. Click the  “Submit” button to save your setting.  
 
Creston:   Projectors  detailed  setting  from  Creston.  
 
 
    

83  Network Cont r ol   Softwa r e   Application   
    ITEM   SETTING   DESCRIPTION  Power
  Power   On   or   Power   O f f   the   projector   via  network.  
V ol   +   ( V olume  
+)   Adjust   the   volume  up.  
V ol   +   ( V olume   - )   Adjust   the   volume   down.  
Mute
  Mute   the   volume   OFF   /  ON.  
Source  
List  
Select   input  source. RGB1
 RGB2
 
HDMI/DVI 
VIDEO  
S-VIDEO USB
 
Brightness   Adjust   the   image   brightness   level.  
Contrast
  Adjust   the   image   contrast...

84  Network Cont r ol   Softwa r e   Application   
  
1. Click    button 
to leave  this page. 
2. Creston Control 
Projector Name:  
Displays the projector name used to identify the projector when connected  to a network. 
When editing, you can enter up to 14 single-byte alphanumeric characters.  
Location:  
Show  the  location  where the  projector is. When editing,  you  can  enter  up to  14   single- 
byte alphanumeric characters.  
Assigned To:  
Displays  the  name  used  to  identify  the...

85  Network Cont r ol   Softwa r e   Application   
   
 
 
  
About  the  “Info”  button:  
Show  current  projector  status  from  this  page.  Press  exit  button  to leave  this page. 
   
 
Click    button 
to  leave  this 
page. 
  About  the  “Contact IT  Help ”: 
   
 
Click  to close Contact  IT Help window dialog.  
Click  to send the message  to Creston ‟s device and projector.  
  Logout:   logging  out 
of the  projector  network 
control. 
    

86  Maintenance   of P r ojector  
Air   Filter   
   
   
  
When a warning message appears to remind you to clean the air filter, please replace a 
new one as soon as possible. Please check and clean the air filter periodically.  
 
Replacing the Air Filter  
When the use time reaches the filter counter time, the projector will display a message 
that indicates to replace with a new filter. If there is no spare air filter available, please 
contact your dealer.  
 
 
 
 
 
 
New one...

87  Maintenance   of P r ojector   
  Lamp
 
  1. If you want  to replace the lamp, but the projector was just turned off, let the 
projector cool down and unplug power cord for  at least 60 minutes.  
 
2. If the projector  is mounted  in the ceiling, contact your dealer  to replace the lamp.  
 
 
 
Replacing New Lamp  
 
1. Remove the lamp  door. 
2. Loosen 2 screws from the lamp holder. Take the handle on the top of the lamp; pull 
out the lamp straight from the projector.  
3. Insert new lamp, lock...

88  Maintenance   of P r ojector   
   
  
WARNING  
 
The projector uses a high-pressure mercury lamp.  
The explosion of lamp with a loud bang or burn out could possibly cause injury or a fire. 
When the bulb burst, it is possible for shards of glass to fly into the lamp housing; and  
for gas containing mercury  to escape from the projector ‟s vent holes.  
If the lamp has broken, do not check the inside of the projector. Ventilate the room 
immediately.  
Do not touch or bring your face close  to the...