Boxlight Projector Write 5 User Manual

9   
 
 
 Part Names
 
 
Rear    
 
A     B  C  D  E
  
 
F  G    H     I  J    
K  L 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 Q P 
 
A   REAR IR RECEIVER
 O  N M 
 
I LAN
 
B   
USB Port (USB-B Type)  
Connect a USB cable  to a computer to 
control computer Interactive functions.  
C   
RS -232C  
Serial data port  for controlling  the projector 
with  a  computer  or  other  RS-232  control  
P l e a s e see  page  7 6  N e t w o r k  C o n t r o l  
Application for details.  
J
  S-VIDEO
 
I npu t  the  S- Vid e...

1
0  Setting Up   
   
  I m a ge   s i z e   ( i n c h )   D is t a nc e   ( c m )   O f fse t ( c m )  
49  
6 3 .6  
2 0 .8  
60  
78 .7  
2 5 .4  
70  
9 2 .5  
2 9 .7  
80  
1 0 6 .2  
3 3 .9  
90  
1 2 0 .0  
3 8 .2  
9 4 . 3  
1 2 6 .0  
4 0 .0  
  
Arrangement  
 
1.   Before installation, make sure that the projector  is turned off and the power cord  is disconnected.  
2.   Do not set up and move the projector, while  it is hot.  
3.   The distance between the projector and screen determines...

11
 WARNING
●   Do not touch around the lamp cover and the 
exhaust vents during use or just after use, since it is 
too hot.
●
   An apparatus with CLASS I construction shall 
be connected to a MAINS socket outlet with a 
protective earthing connection.
●
  The MAINS plug or an appliance coupler shall 
remain readily operable.
 WARNING
●  A strong light is emitted when the projector’s power 
is on. Do not look into the lens of the projector 
or look inside of the projector through any of the...

1
2  Setting Up   
   
 
 
  
Setting Up  The Projector  
 
The projector supports the following four different projection methods.  
 
 
1. Front projection  
   
 
 
 
2. Rear projection   3. Rear ceiling projection
 
 
   
 
 
 
4. Front ceiling projection  
 
 
   
 
 
 
 
The projector can be  installed pitched by any 
angle (360 degree) without any setting  in fan 
mode. As for rolling  it must  be within 10 degree.  
 
 
 
Special installation  is required  in order  to suspend the projector from...

13
Ceiling Mounted Installation Guide 
Attach ceiling mount at four-suspension bracket fixing points when suspending from a ceiling. 
Special installation is required in order to suspend the projector from \
the ceiling. Please ask your 
dealer for details.MAX M4x8 mm For Mounting.
 WARNING
●Do not grasp the security anchor to carry projector, since it is not designed for it.
● The security anchor is not for comprehensive theft prevention measures. \
It is intended to be 
used as supplemental theft...

14
Adjusting The Projector’s Elevation
Use the adjustable foot at the front of the projector to set the image h\
eight.
 CAUTION
●  The adjustment range of front adjustable 
feet is 0 to 7 degrees.
● When the feet are adjusted, it may cause   
   the shape of the projected image to become 
   distorted. Use the keystone correction 
   function  to correct this distortion.
1   Holding the projector, push the foot adjust 
buttons to loosen the front adjustable foot.
12   Position the front side of the...

1
5  Setting Up   
   
 
 
   
  
 How To Connect
 
 
Laptop or desktop computer    
 
 
 
 
 
 
Video  recorder 
DVD Player, etc. 
 
  RS-232C   terminal             RGB  Output   HDMI   
S-VIDEO   Out put
 AUDIO  Out put
 
W hite (L)/Re d(R)  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  AUDIO  I nput 
W hite (L)/Re d(R)   RGB  Out put/I nput
 
VIDEO   Out p ut  AUDIO  Out put
 
W hite (L)/Re d(R)  
 
 
Video  
recorder, etc. 
  Audio  
a mplifier, etc. 
 
 
Before starting, make sure that the projector and...

1
6  Setting Up   
 ●
If  the selected video image  is not displayed after the projector  is turned  on and the correct 
video source has been selected, please check that the video source device  is turned on and 
operating correctly. Also check that the signal cables have been connected correctly.  
 
 
●Many laptops do not turn on their external video ports when connected to a projector . 
Usually a key combination like Fn + F3 or CRT/LCD key turns the external display on / 
off. Locate a function key...

1
7  Remote   Cont r ol   
   
 
 
  
Remote Contr ol Batteries Installation  
  1. Remove the battery cover.  
 
 
 
2. Load the batteries.  
Make sure the poles are correctly oriented.  
 
 
3. Close the battery cover.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Caution  
 
● Avoid excessive heat and humidity.  
●  Do not drop the remote control.  
●  If the remote control  will not  be  used for an extended period, remove the batteries.  
●  Do not expose the remote control  to water  or moisture. This could...

1
8  Remote   Cont r ol   
   
  
POWER  
Power on / operation mode, standby mode, cool 
down mode.  
 
INPUT  
Select input source:    
Quick Key
 
If it  is not  in the On -Screen Display main menu, 
press the  
button as the quick  key. 
RGB 1  RGB 2  
HDMI   Press 
or  to select the item.  
 
  MENU  S-Video
 
Video  USB 
V keystone 
V
olume   
Brightness
 
Contrast  
Display or hide the  On-Screen Display main menu 
page.    
Press 
or  to adjust the value  
 
 
Press  or  to select  On-Screen...