Home > Boxlight > Projector > Boxlight Projector DALLAS User Manual

Boxlight Projector DALLAS User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Boxlight Projector DALLAS User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 257 Boxlight manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							50English ...
    Extended wide timing -
    ModesResolutionV. Frequency [Hz]H. Frequency [Hz]
    WXGA
    1280x7206044.8 
    1280x8006049.6 
    1366x7686047.7 
    1440x9006059.9 
    WSXGA+1680x10506065.3 
    Component signal -
    ModesResolutionV. Frequency [Hz]H. Frequency [Hz]
    480i720x480(1440x480)59.94(29.97)15.7 
    576i720x576(1440x576)50(25)15.6 
    480p720x48059.9431.5 
    576p720x5765031.3 
    720p1280x7206045.0 
    720p1280x7205037.5 
    1080i1920x108060(30)33.8 
    1080i1920x108050(25)28.1 
    1080p1920x108023.98/2427.0
    1080p1920x10806067.5 
    1080p1920x10805056.3  
    						
    							51... English
    HDMI Digital y
    PC signal -
    ModesResolutionV. Frequency [Hz]H. Frequency [Hz]
    VGA
    640x4806031.5 
    640x4806735.0 
    640x4807237.9 
    640x4807537.5 
    640x4808543.3 
    640x48012061.9 
    IBM720x4007031.5 
    SVGA
    800x6005635.1 
    800x6006037.9 
    800x6007248.1 
    800x6007546.9 
    800x6008553.7 
    800x60012077.4 
    Apple, MAC II832x6247549.1 
    XGA
    1024x7686048.4 
    1024x7687056.5 
    1024x7687560.0 
    1024x7688568.7 
    1024x76812099.0 
    Apple, MAC II1152x8707568.7 
    SXGA
    1280x10246064.0 
    1280x10247277.0 
    1280x10247580.0 
    QuadVGA1280x9606060.0 
    1280x9607575.2 
    SXGA+1400x10506065.3 
    UXGA1600x12006075.0  
    						
    							52English ...
    Extended wide timing -
    ModesResolutionV. Frequency [Hz]H. Frequency [Hz]
    WXGA
    1280x7206044.8 
    1280x8006049.6 
    1366x7686047.7 
    1440x9006059.9 
    WSXGA+1680x10506065.3 
    Video signal -
    ModesResolutionV. Frequency [Hz]H. Frequency [Hz]
    480p640x48059.94/6031.5 
    480i720x480(1440x480)59.94(29.97)15.7 
    576i720x576(1440x576)50(25)15.6 
    480p720x48059.9431.5 
    576p720x5765031.3 
    720p1280x7206045.0 
    720p1280x7205037.5 
    1080i1920x108060(30)33.8 
    1080i1920x108050(25)28.1 
    1080p1920x108023.98/2427.0
    1080p1920x10806067.5 
    1080p1920x10805056.3 
    HDMI 1.4a mandatory 3D timing- Video Signal -
    ModesResolutionV. Frequency [Hz]H. Frequency [Hz]
    Frame Packing
    720p5031.5 
    720p59.94/6015.7 
    1080p23.98/2415.6 
    Side-by-Side(Half)1080i5031.5 
    1080i59.94/6031.3 
    Top and Bottom
    720p5045.0 
    720p59.94/6037.5 
    1080p23.98/2433.8  
    						
    							53... English
    Replacing the lamp
    The projector automatically detects the lamp life. When the lamp life is\
     nearing the 
    end of use, you will receive a warning message.
    Lamp is approaching the end of its useful life 
    Replacement suggested!
    Warning! Lamp
    When you see this message, please contact your local reseller or service center 
    to change the lamp as soon as possible. Make sure the projector has been\
     cooled 
    down for at least 60 minutes before changing the lamp. 
    Lamp Replacement Procedure:
    1. 
    Switch off the projector power by pressing the “” button. 
    2. Allow the projector to cool down for at least 60 minutes.
    3. Disconnect the power cord.
    4. Unscrew the two screws on the cover. 1
    5. Lift up and remove the cover. 2
    6. Unscrew the two screws on the lamp module. 3
    7. Pull up the lamp handle and remove the lamp module slowly and carefully. 4
    To replace the lamp module, reverse the previous steps.
    8.   Turn on the projector and use “Lamp Reset” after the lamp module is  replaced.
    1
    34
    2
    The screws on the lamp cover and the lamp cannot be removed.  The projector cannot be turned on if the lamp cover has not been placed \
    back on the projector.  Do not touch the glass area of the lamp. Hand oil can cause the lamp to shatter . Use a dry cloth to clean   the lamp module if it was accidentally touched.
    NoteNote 
    						
    							54English ...
    Replacing and cleaning the optional dust filter
    We recommend cleaning the dust filter after every 500 hours of use, clean it more 
    often if the projector is used in a dusty environment. 
    The usage time of the dust filter is reached.
    Please clean the dust filters for better performance.
    Warning! Dust Filters
    When you see this message, please find following steps for cleaning procedure: 
    Cleaning the Dust Filter Procedure:
    1. 
    Switch off the projector power by pressing the “” button. 
    2. Disconnect the power cord.
    3. Pull the latch by the arrow direction. 1 
    4. Remove the dust filter slowly and carefully.
    5. Clean or replace the dust filter. 2
    To install the dust filter, reverse the previous steps.
    6.   Turn on the projector and use “Reset Dust Filter” after the dust filter is re-placed.
    12
    The optional dust filter should be used in dusty environments.  If the dust filter is installed, proper maintenance will prevent overheating and related damage to the   projector.
    NoteNote 
    						
    							55... English
    If you wish to use a third party ceiling mount kit, please ensure the screws which 
    are used to attach a mount to the projector meet the following specifications:
    Screw type: M4x4 y
    Diameter: 4 mm -
    Length: 11 mm -
    Please note that damage resulting from incorrect installation will inval\
    idate the warranty.
     
     NoteNote
    Ceiling Mount Installation
    137.49
    85.50
    151.30112.50
    74.75
    357.00
    367.00
    Unit: mm
    Lens Center 
    						
    							56English ...
    Specifications
    Projection systemDLP®
    ResolutionWXGA (1280x800)XGA (1024x768)
    Computer compatibilityIBM PC and compatibles, Apple Macintosh, iMac and VESA standards: SXGA, XGA, SVGA, VGA, WXGA, UXGA
    Video compatibilityNTSC (3.58/4.43), PAL (B/D/G/H/I/M/N), SECAM (B/D/G/ K/K1/L), HDTV (720p, 1080i, 1080p), SDTV (480i, 480p, 576i, 576p)
    Aspect ratioAuto, 4:3, 16:9, 16:10
    Displayable colors1.07 billion colors
    Projection lensF# 2.6
    Projection screen size80.2” - 96.6” (Diagonal)68” - 81.9” (Diagonal)
    Max. focus screen size70” - 100” (Diagonal)60” - 90” (Diagonal)
    Projection distance517 mm - 759 mm (±10mm)522 mm - 802 mm (±10mm)
    Throw ratio0.350.43
    Horizontal scan rate30 k - 100 kHz
    Vertical refresh scan rate50 - 120 Hz
    Keystone correction±15 degrees
    Weight8 Kg (17.64 lbs)
    Dimensions (W x D x H)357 (W) x 367 (D) x 135(H) mm (excluding foot) 
    357 (W) x 367 (D) x 231(H) mm (including reflection mirror)
    Power supplyAC 100 - 240 V, 50 - 60 Hz
    Power consumptionNormal mode: 350W ±10% @ 110Vac (Bright mode @  y
    full power)
    ECO mode: 290W ±10% @ 110Vac (Video mode @ eco  y
    power)
    Standby < 0.5 W y
    Operating temperature5ºC to 40ºC / 41ºF to 104ºF 
    						
    							57... English
    I/O connectorsPower socket x 1 y
    LAN (RJ45) x 1 y
    RS232 x 1 y
    DC12V x 1 y
    HDMI x 1 y
    VGA input x 2 y
    VGA output x 1 y
    S-Video x 1 y
    Composite x 1 y
    3.5 mm audio jack input x 2 y
    RCA (L/R) audio jack input x 2 y
    3.5 mm audio jack input (Microphone)x 1 y
    3.5 mm audio jack input x 1 y
    Mini USB B x 1 y
    Standard package contentsAC power cord x 1 y
    VGA cable x 1 y
    Remote control x 1 y
    CR2025 x1 y
    User’s guide (DVD) x 1 y
    Design and specifications are subject to change without prior notice.
     
     NoteNote 
    						
    All Boxlight manuals Comments (0)

    Related Manuals for Boxlight Projector DALLAS User Manual