Boxlight Projector DALLAS User Manual

30English ...
Password default value is “000000” (first time).  NoteNote
SelectEnterExit
Securtiy
Enter Security Code (6 digits)Incorrect security code Re-enter again  

31... English
Mute
Choose “On” to turn mute on. `
Choose “Off” to turn mute off. `
Volume
Press the ◄ button to decrease the volume. `
Press the ► button to increase the volume. `
Microphone Volume
Press the ◄ button to decrease the microphone Volume. `
Press the ► button to increase the microphone Volume. `
Volume
VolumeMuteVolumeMicrophone Volume
Off
SelectEnterExit 

32English ...
Logo
Use this function to set the desired startup screen. If changes are made\
 they will 
take effect the next time the projector is powered on.
Default: The default startup screen. `
User: Use stored picture from “Logo Capture” function. `
Logo Capture
Press ► button to capture an image of the picture currently displayed on screen.
Screen capture in progress...Please wait...
For successful logo capture, please ensure that the onscreen image does \
not exceed the projector’s 
 
 
native...

33... English
SelectEnterExit
Input
HDMI
VGA-1
VGA-2
S-Video
Composite
Auto Power Off (min)
Sets the countdown timer interval. The countdown timer will start, when there is no 
signal being sent to the projector. The projector will automatically pow\
er off when 
the countdown has finished (in minutes).
Lamp Setting
Refer to page 34.
Dynamic Black
On: The pictures with the optimum contrast will be displayed by automati\
cally  `
providing signal compensation to suit the pictures concerned.
Off: Turn off...

34English ...
Lamp Hours Used (Normal)
Display the projection time of normal mode.
Lamp Hours Used (ECO)
Display the projection time of ECO mode.
Lamp Life Reminder
On: Choose “On” to show the lamp end of life warning message. `
Off: Choose “Off” to hide the lamp end of life warning message. `
Lamp Power Mode
Normal: Normal mode. `
ECO: Use this function to dim the projector lamp which will lower power \
 `
consumption and extend the lamp life.
Clear Lamp Hours
Choose “Yes” to reset the lamp hour counter...

35... English
3D
3D
Auto: When a HDMI1.4a 3D timing identification signal is detected, the 3D image  `
is selected automatically.
Choose “Off” to disable 3D function. `
Choose “On” to enable 3D function. `
3D Invert
If you see a discrete or overlapping image while wearing DLP 3D glasses, you may 
need to execute “Invert” to get best match of left/right image sequence to get the 
correct image.
3D Format
Use this feature to select the 3D format. Options are: “Frame Packing”, “Side-by-Side 
(Half)”, “Top...

36English ...
The Interactive function is available when displaying graphic source from HDMI/VGA input. Other sources 
 
 
are not supported.
If “3D” or “Dynamic Black” function is enabling, “Interactive” feature is disabling.
 
 NoteNote
Interactive Settings
Use this feature to select the Interactive Pen function. Options are: “Off” and “IR 
Camera”. Choose “Off” to disable the Interactive Pen function.
You need to unplug the Mini USB cable that connects NB/desktop with the projector 
before using the...

37... English
LAN
LAN Settings
LANDHCP
IP Address
Subnet Mask
Gateway
DNS
Store
Reset
SelectEnterExit
Off
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
DHCP: If a DHCP server exists in the network to which the projector is  `
connected, the IP address will automatically be acquired when you select DHCP 
On. If DHCP is Off, manually set the IP Address, Subnet Mask, and Gateway. 
Use ▲ or ▼ to select the number of IP address, Subnet Mask, and Gateway. 
IP Address: Select an IP address. `
Subnet Mask: Configure the...

38English ...
Turn on DHCP to allow a DHCP server to automatically assign an IP, or 1. 
manually enter the required network information.
LAN SettingsDHCP
IP Address
Subnet Mask
Gateway
DNS
Store
Reset Off
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Select
Enter Exit
Open your web browser and type in IP Address from the OSD LAN. 2. 
Based on network web-page for the input-string in [tools] tab, the limitation for 3. 
Input-Length is in the below list (“space” and the other punctuation key included): 
Category...

39... English
When making a direct connection from your computer to the projector
Step 1: Find an IP Address (192.168.10.100) from LAN function of projector.
Step 2: To open Network Connections, 
click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections. Click the connection you want to configure, and then, under Network Tasks  , click Change settings of this connection.
Step 3: On the General tab, under This 
connection uses the following 
items, click...