Boxlight Mp60e/63e Projector Users Guide

							5 1C
le an in g t h e p ro je c to r
Warning:   Always unplug the projector before performing any maintenance.
C le an  t h e p ro je cto r c ase  b y w ip in g i t g en tly  w ith  a  s o ft c lo th .
I f necessary, the case can be cleaned using a neutral detergent and a soft cloth
ensure the case is completely dry before turning the projector back on. C
le an in g t h e l e n s
U se  a c o m mer c ia lly -a v aila b le  air  blo w er,  or  use len  s clean  in g paper and lens
cleaner approved for use on optical coatings.
D o n ot clean the  len s with h  ar sh mater  ials or subject th  e len s to sh  ock, as it can 
easily become damaged. Close th e len s cover when th e pr ojector n ot in use. M
ain te n an ce a n d T ro u ble sh ootin g_ 
						

							5 2 
           C le an in g  t h e A ir  F ilt e r A
. Wh  en th  e air filter becomes clogged with dust, etc., th  e pr ojector may overheat
and turn itself off to prevent internal damage.
When cleaning the filter, stand the projector up on its side to prevent \
dust from  entering the projector. Use a vacuum to remove the dust fr  om th e outside of the 
air filter.  Do not operate th  e pr ojector with th  e air filter r emoved. B. Clean the air filter ever y 100 h our s.
*
If  th e fi lte r is difficult to clean or if it is deteriorating, it should  be replaced
1 ..R em ove  th  e  filte r  co ver from th  e bottom of pr  ojector.
2 ..P ull o u t t h e a ir  f ilte r.
3 .. I n sta ll the new air filter  .
1 . 2
. 
						

							5 3R
ep la cin g t h e P ro je c tio n  L am p
                C au tio n : T he l a m p a n d i n sid e o f th e p ro je cto r b eco m e v ery  h ot w hile  t h e
p ro je ctio n l a m p i s  l it. A llo w  t h e p ro je cto r t o  c o ol fo r a t l e a st 1 5 m in ute s p rio r t o
o pen in g t h e l a m p d oor. 1
. R ele ase  t h e L am p D oor L atc h  u sin g a  s m all s c re w driv er o r s im ila r t o o l t o  s lid e t h e
     l a tc h  t o w ard s t h e p ro je cto r l e n s.
2 . R em ove t h e L am p D oor.
3 . R em ove t h e t w o P hillip s h ead  s c re w s t h at h old  t h e l a m p in  p la c e.
4 . G ra sp  t h e h an dle  o n  t h e t o p  o f t h e l a m p a n d p ull t h e l a m p s tr a ig h t u p o u t o f t h e p ro je cto r.
               W arn in g: D o n ot t o u ch  t h e b ulb .  T o uch in g th e b ulb  will g re a tly  
               decrease the life of the lamp and could cause the bulb to explode.
5 . S lid e t h e r e p la c em en t l a m p in to  p la c e a n d p re ss  f ir m ly  t o  s e a t t h e l a m p.
6 . R ein sta ll t h e s c re w s r e m oved  i n  s te p  3 .
7 . R ein sta ll t h e l a m p d oor a n d p re ss o n  t h e s id e c lo se st t o  th e l e n s u n til t h e l a tc h  s n ap s
      i n to  p la c e a n d t h e l a m p d oo r i s  f lu sh  w ith  t h e t o p  o f t h e p ro je cto r. 
						

							5Symptom
Possible cause Remedy
The power is not turned
on *The main power switch is not turned on.
*The power cord is disconnected. *Turn on the main power switch.
*Plug the power cord into an AC power outlet
No video or audio *The input is not correctly connected.
*No signal input *Select the appropriate input source
*Connect correctly
No audio *The projector is not correctly connected.
*The volume is set to minimum.
*Mute is turned on *Connect correctly.
*Press VOLUME+ on the remote control or
  display the menu screen and adjust the
volume.
*Press the MUTE button
No Image *The projector is not correctly connected.
*The lens cover is  still on *Connect correctly.
*Remove the lens cover
.Colors are pale *Color density and color matching are not
correctly adjusted. *Adjust the setting in the OSD Menu.
Images are dark *Brightness and contrast are not correctly
  adjusted.
*The lamp is nearing the end of its service
life *Adjust the S-video.
*Replace with a new lamp
Video is blurred *Focus or  phase is out of adjustment. *Adjust the focus or  phase.I
n dic a to  rs 
T h e  Pow er  an  d L am p i n  dic a to r s  sh  ow  th e  sta tu s o f  th  e  pr o je cto r.  B efo r e  re q uestin g 
rep  air, check th  e p r ojector st  atu s u sin g th  e ch  ar t below. If the p  r obl  em can  n ot be
r e so lv ed  c o n ta c t y o u r d ea le r o r B ox lig h t T ech nic a l S upp ort f o r   a ssis ta n ce.
Power (Green) Lamp (Red)ConditionsNotes
slow flashing offstandy by mode *projector is ready to be turned on(normal)
on offon mode *projector is on and operating normally
on slow flashing cool-down
mode *projector is in cool-down mode and will
not respond to user input (normal)
on  fast flashing  fan-fault mode  * the projector has detected a problem 
with an internal fan, the lamp will shut off
automatically, contact your dealer
fast flashing onlamp-cover
open *the lamp cover is open or there is a
problem with the lamp. If the lamp door is
closed and replacing the lamp does not
correct the issue, contact your dealer.
fast flashing fast flashing High
temperature *the projector has overheated and shut the
lamp off. Correct the overtemp condition
immediately.
1. Check that the ventilation slots are free from obstructions
2. Check the cleanliness of the air filter.
3. If the condition persists, contact your
dealer or Boxlight Technical Support for
service. 4 
						

							55 L
is  t o f  S  up por te d   D is p la y Mo  des Signal Refresh Rate(Hz) Resolution Resolution for
resized display Resolution for
normal display
PC98 640x4001024x640 640x400
EGA 640x3501024x560 640x350
VGA 60640x480 1024x768 640x480
VGACGA 640x4001024x640 640x400
VGAEGA 640x3501024x560 640x350
VGA text 720x350
1024x568 720x400
720x350 1024x498 720x350
VESA  72/75/85/120,
iMAC 640x480
1024x768 640x480
SVGA  56/60/72/75/85/-
120,iMAC  800x600
1024x768 800x600
XGA 43I/60/70/75/85/-
120,iMAC  1024x768
1024x7681024x768
SXGA 70/75/85/100 1152x8641024x768 1152x864
SXGA 60/75/85 1280x9601024x7681280x960
SXGA 43I/60/70/75 /85  1280x1024960x7681280x1024
SXGA+ 60/75/85 1400x1050 1024x7681400x1050
UXGA 48i/60/65/70/
75/80/85 1600x1200
1024x7681600x1200
MAC13 640x4801024x768 640x480
MAC16 832x6241024x768 832x624
MAC19 1024x7681024x7681024x768
MAC21 1152x8701016x768 1152x870
TV(525i) 60640x480 1024x768 640x480
TV(625i) 50720x540 1024x768 720x540
SDTV(525p) 60640x480 1024x768 640x480
HDTV(750P) 601280x720 1024x576
HDAV(1125i- ,1125p) 60
1920x1080 1024x57655 
						

							5S
pec if ic a tio n s
Projection Display Epson 0.99 Poly-Silicon TFT LCDx3
Resolution True XGA, 1024x768 / SVGA, 800x600
Projection Lens Manual, F#1.7~2.41, f=33.4~43.3mm, zoom1
Image Size 30~300
Projection Distance 0.9M~10M
Uniformity Typical 85%image center-to-corner
Color Temperature 6400 K~ 6800 K
Scanning Frequency Horizontal: 15~107kHz, V-syns.43~120Hz
Video Compatibility NTSC, PAL, SECAM, HDTV720P
Computer Compatibility UXGA, SXGA, XGA, SVGA, VGA
Inputs / Outputs Computer :
x1DVI-I
Computer : x1Mini D-sub 15 pin(female)
Monitor Out: x1Mini D-sub 15 pin(female)
Audio in 1 : x1Stereo mini jack
Audio in 2 : x1Stereo mini jack
Audio out 1 : x1Stereo mini jack
Control(RS-232) : x1Mini D-sub 9 pin 
S-Video : x1Mini DIN 4-pin
Video : x1RCA pin jack
Mouse : x1USB connector (B-type)
Component x1RCA pin jack
Power Consumption 350W at normal operation
Power Supply 350W fully range from 100V~240V 50/60Hz
Installation Front / Rear /Ceiling
Dimension(WxHxD) 364x110x285 mm
Weight 5.3 kg
Operation Temperature +5~+35 degreC
Storage Temperature -10~+60 degreC
Operation Humidity 20~80%RH
Digital Keystone Correction +-5 degre(H/V)
Aspect Ratio 4:3 (support 16:9) 6 
						

							LIMITED WARRANTY 
Boxlight (“Boxlight”) warrants that each Boxlight MP-60e and MP-63e (“the Product”) sold 
hereunder will conform to and function in accordance with the written specifications of Boxlight. Said 
limited warranty shall apply only to the first person or entity that purchases the Product for personal 
or business use and not for the purpose of distribution or resale. Said warranty shall continue for a 
period of two (2) years from the date of such purchase. The standard limited warranty excludes the 
lamps in projectors after 120 days or 500 hours (whichever comes first) and the accessories after one 
year. Boxlight does not warrant that the Product will meet the specific requirements of the first person 
or entity that purchases the Product for personal or business use. Boxlight’s liability for the breach of 
the foregoing limited warranty is limited to the repair or replacement of the Product or refund of the 
purchase price of the Product, at Boxlight’s sole option. Replacement Product may be re-furbished in 
“like-new” condition, at Boxlight’s sole discretion. To exercise the Purchaser’s rights under the 
foregoing warranty, the Product must be returned at the Purchaser’s sole cost and expense, to Boxlight 
or to any authorized Boxlight service center, and the Product must be accompanied by a written letter 
explaining the problem and which includes (i) proof of date of purchase; (ii) the dealer’s name; and 
(iii) the model and serial number of the Product. When sending your unit in for repair, please ship 
your unit in its original packing material or a Boxlight approved ATA Shipping Case, or have a 
professional packaging company pack the unit. Please insure your shipment for its full value. A 
return authorization number, issued by the Boxlight Customer Service department, must also 
be clearly displayed on the outside of the shipping carton containing the Product. 
 
WARRANTY LIMITATION AND EXCLUSION 
Boxlight shall have no further obligation under the foregoing limited warranty if the Product has been 
damaged due to abuse, misuse, neglect, accident, unusual physical or electrical stress (unusual 
physical and electrical stress includes unusually long operation, exposure to smoke and other airborne 
contaminants), unauthorized modifications, tampering, alterations, or service other than by Boxlight 
or its authorized agents, causes other than from ordinary use or failure to properly use the Product in 
the application for which said Product is intended. 
   
						

							 
DISCLAIMER OF UNSTATED WARRANTIES 
THE WARRANTY PRINTED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS 
PURCHASE. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT 
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE ARE DISCLAIMED. THERE ARE NO WARRANTIES THAT EXTEND 
BEYOND THE FACE HEREOF AND THE FOREGOING WARRANTY SHALL NOT BE 
EXTENDED, ALTERED OR VARIED EXCEPT BY WRITTEN INSTRUMENT SIGNED BY 
BOXLIGHT. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED 
WARRANTY MAY LAST, SO SUCH LIMITATIONS MAY NOT APPLY TO YOU. 
 
LIMITATION OF LIABILITY 
IT IS UNDERSTOOD AND AGREED THAT BOXLIGHT’S LIABILITY WHETHER IN 
CONTRACT, IN TORT, UNDER ANY WARRANTY, IN NEGLIGENCE OR OTHERWISE SHALL 
NOT EXCEED THE RETURN OF THE AMOUNT OF THE PURCHASE PRICE PAID BY 
PURCHASER AND UNDER NO CIRCUMSTANCES SHALL BOXLIGHT BE LIABLE 
FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOST 
PROFITS, LOST REVENUES OR LOST SAVINGS. THE PRICE STATED FOR THE PRODUCT 
IS A CONSIDERATION IN LIMITING BOXLIGHT’S LIABILITY.  NO ACTION, 
REGARDLESS OF FORM, ARISING OUT OF THE AGREEMENT TO PURCHASE THE 
PRODUCT MAY BE BROUGHT BY PURCHASER MORE THAN ONE YEAR AFTER THE 
CAUSE OF ACTION HAS ACCRUED. SOME STATES DO NOT ALLOW THE EXCLUSION OR 
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE 
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS LIMITED WARRANTY 
GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS THAT 
VARY FROM STATE TO STATE. 
 
 
 
 
Boxlight Corporation  
19332 Powder Hill Place  
Poulsbo, WA 98370-7407 USA 
USA and Canada 800.762.5757 
International +1.360.779.7901 
www.boxlight.com