Boxlight Mp-385t Projector Users Guide
Have a look at the manual Boxlight Mp-385t Projector Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 257 Boxlight manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![](/img/blank.gif)
41 APPENDIX Remote Control Unit does not work.Check batteries. Check ALL-OFF switch on Remote Control Unit is set to “ON.”. Make sure nothing is between Infrared Remote Receiver and Remote Control Unit. Make sure you are not too far from a projector when using Remote Control Unit. Maximum operating range is 16.4’ (5m). Problem:Try these Solution Wireless Mouse function does not work.Check cable connection between a projector and your computer. Check mouse setting on your computer. Turn a projector on before turning on a computer. This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards. The CE Mark is a Directive conformity mark of the European Community (EC). SERVICE WARNING: High voltages are used to operate this projector. Do not attempt to open the cabi- net. Boxlight Service is easily obtained. If after following instructions above, you find that service is necessary, con- tact Boxlight for assistance at 1-800-762-5757 or 360-779-7901. Give the model number and explain the difficulty. We will advise you how to obtain service. Please have the following information available: Serial Number of Projector. Resolution of Computer. Refresh rate of Computer.
![](/img/blank.gif)
Multi-media Projector 42 APPENDIX Accessories Specifications are subject to change without notice. TECHNICAL SPECIFICATIONS 1.3 TFT Active Matrix type, 3 panels 17.4 lbs (7.9 kg) 12.6 x 6.6 x 16.8 (319 mm x 168 mm x 429.5 mm) 1024 x 768 dots 2,359,296 (1024 x 768 x 3 panels) PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N Up and Down 800 TV lines (HDTV) INT. SP. Stereo (R and L), 2 watt RMS (T.H.D. 10%) 41 ˚F ~ 95 ˚F (5 ˚C ~ 35 ˚C) 14 ˚F ~ 140 ˚F (-10 ˚C ~ 60 ˚C) Users Guide AC Power Cord Wireless/Wired Remote Control Transmitter and Batteries Remote Control Cable VGA Cable MAC/VGA Adapter 3 Types Control Cable (For PS/2, Serial and ADB port) Protective Dust Cover Lens Cover Projector Type Net Weight Dimensions (W x H x D) Panel Resolution Number of Pixels Color System Scanning Frequency Horizontal Resolution Built-in Speakers Operating Temperature Storage Temperature LCD Panel System 200 watt typeProjection Lamp 0˚ to 10.5˚Feet Adjustment Power Source : AA, UM3 or R06 Type x 2 Operating Range : 16.4’ (5m) / ±30˚ Dimensions : 2.2” x 1.3” x 7.6” (55mm x 34mm x 192mm) Net Weight : 0.36 lbs (165 g) (including batteries) Laser Pointer : Class IILaser (Max. Output : 1mW / Wave length : 650±20nm) Remote Control Transmitter 480i, 480p, 575i, 575p, 720p, 1035i and 1080iHigh Definition TV Signal AC 100 ~ 120 V (3.6 A Max. Ampere), 50 / 60 Hz (The U.S.A and Canada) AC 200 ~ 240 V (1.8 A Max. Ampere), 50 / 60 Hz (Continental Europe) Voltage and Power Consumption H-sync. 15 ~ 100 KHz, V-sync. 50 ~ 100 Hz Motorized Lens Shift DVI Terminal (Digital), HDB 15-pin Terminal (Analog) and Stereo Mini Type Jack (Audio)Input 1 Jacks BNC Type x 5 (G or VIDEO/Y, B or Cb/Pb, R or Cr/Pr, H and V), Stereo Mini Type Jack (Audio)Input 2 Jacks RCA Type x 3 (VIDEO/Y, Cb/Pb and Cr/Pr), RCA Type x 2 (Audio R and L) and DIN 4-pin (S-Video)Input 3 Jacks DIN 8-pin (Control port), USB port (Series B receptacle) and Wired Remote Jack Other Jacks Adjustable from 31 to 400Projection Image Size (Diagonal) F1.8 ~ 2.1 lens with f=48.4 mm ~ 62.8 mm Motor zoom and focusProjection Lens 4.6 (1.4 m) ~ 47.3 (14.4 m)Throw distance
![](/img/blank.gif)
43 APPENDIX CONFIGURATIONS OF TERMINALS COMPUTER INPUT-1 TERMINAL (ANALOG) Terminal : HDB15-PIN Connect display output terminal of computer to this terminal with VGA Cable (supplied). When connecting Macintosh computer, MAC Adapter (not supplied) is required. 512341096781514131112 Red Input Ground (Horiz.sync.) Green Input Sense 2 Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V Power Horiz. sync. Ground (Vert.sync.) DDC Data Sense 0 Vert. sync. DDC Clock 9 13 10 12 11 14 15 Pin Configuration Terminal : Mini DIN 8-PIN Connect control port (PS/2, Serial or ADB port) on your computer to this connector with Control Cable (supplied). 12 345876 Pin Configuration CONTROL PORT CONNECTOR ----- CLK DATA GND ----- ----- GND ----- R X D ----- ----- GND RTS / CTS T X D GND GND ----- ADB ----- GND ----- ----- ----- GND PS/2SerialADB 1 2 3 4 5 6 7 8 COMPUTER INPUT-1 TERMINAL (DIGITAL) Terminal : DVI 24-pin Connect display output terminal of computer to this terminal with DVI cable (for Single Link T.M.D.S. / not supplied). 1917 21018 31119 41220 51321 61422 71523 81624 T.M.D.S. Data2– No Connect T.M.D.S. Data2+ No Connect T.M.D.S. Data2 Shield DDC Clock DDC Data No Connect 1 5 2 4 3 6 7 8 Pin ConfigurationT.M.D.S. Data1– No Connect T.M.D.S. Data1+ No Connect T.M.D.S. Data1 Shield +5V Power Ground (for +5V) Hot Plug Detect 9 13 10 12 11 14 15 16 T.M.D.S. Data0– No Connect T.M.D.S. Data0+ No Connect T.M.D.S. Data0 Shield T.M.D.S. Clock Shield T.M.D.S. Clock+ T.M.D.S. Clock– 17 21 18 20 19 22 23 24 Vcc - Data + Data Ground 1 2 3 4 USB CONNECTOR (Series B) Pin Configuration Connect USB port terminal on your computer or peripheral equipment to this connector with USB Cable (not supplied). 2 341
![](/img/blank.gif)
Printed in Japan Part No. 610 301 7808 (1AA6P1P3571-- MB8E) LIMITED WARRANTY BOXLIGHT CORPORATION (BOXLIGHT) warrants that each Boxlight MP-385t (the Product) sold hereunder will con- form to and function in accordance with the written specifications of BOXLIGHT. Said limited warranty shall apply only to the first person or entity that purchases the Product for personal or business use and not for the purpose of distribution or resale. Said warranty shall continue for a period of two (2) years from the date of such purchase. BOXLIGHT does not warrant that the Product will meet the specific requirements of the first person or entity that purchases the Product for personal or business use. Lamp is warrantied for 120 days. BOXLIGHT CORPORATIONs liability for the breach of the foregoing limited warranty is limited to the repair or replace- ment of the Product or refund of the purchase price of the Product, at BOXLIGHTs sole option. To exercise the Purchasers rights under the foregoing warranty, the Product must be returned at the Purchasers sole cost and expense, to BOXLIGHT or any authorized service center provided, however, that the Product must be accompanied by a written letter explaining the problem and which includes (i) proof of purchase; (ii) the dealers name; and (iii) the model and serial number of the Product. A return authorization number, issued by the BOXLIGHT customer service department, must also be clearly displayed on the outside of the shipping carton containing the Product. WARRANTY LIMITATION AND EXCLUSION BOXLIGHT CORPORATION shall have no further obligation under the foregoing limited warranty if the Product has been damaged due to abuse, misuse, neglect, accident, unusual physical or electrical stress, unauthorized modification, tam- pering, alterations, or service other than by BOXLIGHT or its authorized agents, causes other than from ordinary use or failure to properly use the Product in the application for which said Product is intended. DISCLAIMER OR UNSTATED WARRANTIES The warranty printed above is the only warranty applicable to this purchase. All other warranties express or implied, including, but not limited to, the implied warranties or merchantability and fitness for a particular purpose are disclaimed. There are no warranties that extend beyond the face hereof and the foregoing warranty shall not be extended, altered or varied except by written instrument signed by BOXLIGHT CORPORATION. It is understood and agreed that BOXLIGHTs liability whether in contract, in tort, under any warranty, in negligence or otherwise shall not exceed the return of the amount of the purchase price paid by purchaser and under no circumstances shall BOXLIGHT be liable for special, indirect or consequential damages. The price stated for the Product is a considera- tion in limiting BOXLIGHTs liability. No action regardless of form, arising out of the agreement to purchase the product may be brought by purchaser more than one year after the cause of action has accrued. LIMITATION OR LIABILITY Boxlight 19332 Powder Hill Place Poulsbo, WA 98370-7407 USA www .boxlight.com U.S. and Canada 800-762-5757 International 1-360-779-7901