Home > Boxlight > Projector > Boxlight Cp755ew User Manual

Boxlight Cp755ew User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Boxlight Cp755ew User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 257 Boxlight manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							
    Installation 
      Setting Up the Projector   
     
    Multimedia LCD Projector
     
    The projectorsupports the following four different projection methods
    z    Front p
    rojection 
    z    Rea
    r
    
    						
    							
     
    
    Multimedia LCD Projector
     
    z    Front ceiling 
    projection
     
    
    						
    							
    Multimedia LCD Projector
     
    Screen Size and Projection Distance
    The distance between the projector and screen determines the actual image 
    size. Refer to the table below to determine the image size at a given distance.
    Screen  (inch)   Distance (m)
    Tele Wide  
    40 0.96 0.78 
    60 1.45 1.19 
    80 1.95 1.6 
    100 2.44 2.02 
    150 3.68 3.05 
    200 4.92 4.08 
    300 7.4 6.15 
    -22
    -
      
    						
    							
     
    
    Multimedia LCD Projector
     
    Adjusting the Image Position
    Use the adjustable foot at the front ofthe projector to set the image height.
    Rotate the adjustable foot at the rear of the projector to fine-tune the image 
    position. 
    
    						
    							
     
    Multimedia LCD Projector
     
    Moving the projector ( optional) 
    1.  Use the carrying handle when moving the projector.(option) 
    2.  Replace the lens cover and retrac t the front adjustable foot when 
    moving the projector to prevent  damage to the projector. 
    Caution 
     
    
    						
    							
     
    
    Multimedia LCD Projector
     
    How to Connect 
    Before starting, make sure that the projector and computers are both
    turned off. 
    1. Connect the computer cable.
    1.1    Connect either end of the computer cable to the projector’s 
    computer 1/ computer port. 
    1.2    Disconnect the monitor cable  from the computer and connect the 
    other end of the terminal where the monitor cable is disconnected
    from the computer. 
    1.3    If needed, connect the monitor ca ble of the computer monitor to 
    the projector’s Computer out. 
    1.4
      Tighten the screw on all connectors. 
    .Connect the audio cable if necessa
    ry.
    2.1    Connect one end of the audi o cable to the Audio in jack on 
    the projector. 
    2.2    Connect the other end of the audio cable to the audio output  port on the computer sound card. 
    -25
    -
      
    						
    							
     
    
    Multimedia LCD Projector
     
    Laptop PC                                                          
    A PC laptop computer 
    Before beginning, make sure that the projector and computers are both turned
    off. 
    1. Connect the computer cable.  
    1.1 Connect either end of the computer  cable to the projector’s computer 
    1or computer 2 port. 
    1.2 Connect the other end of the project cable to the monitor out  connection on the laptop. 
    1.3 Tighten the all connectors. 
    2. Connect the audio  cable if necessary. 
    2.1 Connect one end of the audi o cable to the Audio in 
    jack on the projector. 
    2.2 Connect the other end of  the audio cable to the 
    audio output port on the laptop PC. 
    -26
    -
      
    						
    							
     USB Mouse_  
    USB mouse compatible MS-Window98/2000/NT/XP/Me, 
    Macintosh :OS8.6~10.1, and a Microsoft Mouse driver installed. 
    1. Insert the end of the USB Cable (B-Type) to the projector’s USB port. 
    2. Connect the end of the USB Cable (A -type) to the computer’s USB port. 
    3. When the projector and computer are turned on, the appropriate  drivers should load automatically. 
     
    Multimedia LCD Projector
     
    -27-
      
    						
    							
      Video  
    A. Connect to a video source 
    The Projector can receive composite AV ,YPbPr and S-Video. 
    1. Connect RCA plug at projector and video source ( like DVD player) for 
    video signal. 
     
     
     
     
    Multimedia LCD Projector
     
    2 .  Connect RCA plug ( white and red) to audio source ( like DVD player)
    and connect the phone jack to projector for audio signal. 
    3 . Connect YPbP
    r plug at projector computer in2 port and video source
    ( like DVD player) for video signal. 
    4 . Fo
    r S-Video, using S-Video cable connect to projector and video
    source for video signal. 
    -28
    -
      
    						
    							
     
     
    Multimedia LCD Projector
     
    Basic Operation 
    Turning on the projector                                               
    Procedure 
    1.  Check the power is turned off fo r the projector and all components 
    connected to the projector. 
    2. Remove the lens cover. 
    3.  Connect the power cord to the projector. 
    4.  Turn on the power switch. 
    5. Press the  button on
    the control panel or [POWER] button on
    the remote control. 
    5.Power
    Mouse 
    L R 
    4. 3.
    1.
    2.
    -29-
      
    						
    All Boxlight manuals Comments (0)

    Related Manuals for Boxlight Cp755ew User Manual