Boxlight Cp 740e User Manual

21
Multimedia  LCD  Projector
Eng
li s
h
Remote Control-Type 2 (optional)
1. Power
    Power on / operation
    mode, Standby mode,
    Cooling-down mode
2.  Laser Pointer
    Use laser pointer
   from remote control.
3.  Mouse Left
    Mouse left
    multipurpose key.
4.  Mouse Right
    Mouse right
    multipurpose key.
5.  Menu
    Display or hides the
    OSD main menu page
6.  Menu-up / Menu-
   down
    Selects OSD menu
    item up or down
7.  Menu-right / Menu-left
     Selecting and adjusting
the...

22
Multimedia  LCD  Projector
En
g
l
i
s
h
Remote Control Batteries Installation
Loading AAA batteries into the remote control.
1. Remove the battery cover.
Push the knob while lifting up the battery cover.
2. Loading the batteries.
Make sure the plus and minus poles are correctly oriented.
3. Close the battery cover.
       Caution
   Avoid excessive heat and humidity.
• Do not drop the remote control.
• Do not expose the remote control to water or moisture, this could result in malfunction.
• When the...

23
Multimedia  LCD  Projector
E
ng
l
is
h
Installation
Setting Up the Projector
The projector supports the following four different projection methods
* Front projection
* Rear 

24
Multimedia  LCD  Projector
En
g
l
i
s
h
* Rear ceiling projection
* Front ceiling projection
A special method of installion is required in order to suspend the
projector from the ceiling.Please ask your dealer for details. 

25
Multimedia  LCD  Projector
Eng
li s
h
Screen Size and Projection Distance
The distance between the projector and screen determines the actual
image size.Refer to the table below to determine the image size at a
given distance..
             1. XGA F: # 1.75
Image Size(inch)                              Distance(M)
       30                               1.17                          1.40
       40                               1.55                          1.86
       50...

26
Multimedia  LCD  Projector
Eng
li s
h
Adjusting the Image Position
Use the adjustable feet at the front of the projector to set the image height.
Rotate the adjustable feet at the rear of the projector to fine-tune the image
position.
*When the feet are adjusted, it may cause the shape of the projected images
   to become distorted. Use the keys tone correction function to correct this
  distortion.
*To retract the front adjustable feet, keep press the feet release button. The
   front adjustable foot...

27
Multimedia  LCD  Projector
En
glis
h
Moving the projector
Carrying bag
 (Optional , please contact BOXLIGHT for more information) 1.Use the carrying bag when moving the projector.(option)
2.Replace the lens cover and retract the front adjustable foot  when
   moving the projector to prevent damage to the projector.
 
 Caution
The optional carry bag  is intended to protect the projector from dust
and scratches on the surface of the cabinet. It is not designed to protect
the projector from external...

28
Multimedia  LCD  Projector
Eng
li s
h
How  to Connect
Desktop PC
Before starting, make sure that the projector and computer are both
turned off.
1. Connect the computer cable.
    1.1 Connect either end of the computer cable to the projector’s
          computer 2 / Y Pb Pr input port.
    1.2 Disconnect the monitor cable from the computer and connect
          the other end of the terminal where the monitor cable is
          disconnected from the computer.
    1.3 If  needed, connect the m onitor...

29
Multimedia  LCD  Projector
En
glis
h
Laptop PC
Laptop PC
PC laptop computer
Before beginning, make sure that the projector and laptop are both
turned off.
1. Connect the computer cable.
    1.1 Connect either end of the computer cable to the projector’s
         computer 2 / Y Pb Pr input port.
    1.2 Connect the other end of the project cable to the monitor out
          connection on the laptop.
    1.3 Tighten the screw on all connectors.
2.Connect the audio cable if necessary.
    2.1 Connect one...

30
Multimedia  LCD  Projector
Eng
li s
h
PC desktop computer  (DVI-I port)
before beginning, make sure that the projector and computer are both
turned off.
1. Connect the computer DVI cable.(optional)
     1.1Connect either end of the DVIcable to the projector’s computer
          1 input port.
    1.2 Disconnect the monitor cable from the computer and connect
          the other end of the terminal where the monitor cable is discon-
          nected from the computer.
    1.3 Tighten the screw on all...