Boxlight Cp 730e User Manual

							11
Multimedia  LCD  Projector
Eng
li s
h
Optional Contents 
1.  Remote cont rol
   (Type 2, with remote mouse
    and  Laser point function)
2.  USB Mouse
     ( support type 2 remote contro l
)

3.  DVI Cable
4.  RGB -DVI Adapter
5.  YPbPr-RGB Cable
6.  Carring Bag
7.  
Filter Sponge 
						

							12
Multimedia  LCD  Projector
En
g
l
i
s
h
8. Control panel
Speaker
4.Filter cover( Bottom)
3 F r o n t I R r e c e i ve r
6 Foot adjuster button
5. Front/ Rear adjustable foot7. Lens cover2. Focus ring 1.Zoom ringOutlet ventilation
Part Names  and  Function:
           Main Unit
1.  Zoom Ring
Use the Zoom Ring to adjust the size of the projected image.
Rotate the Zoom Ring until the image is the desired size.
2. Focus Ring
Use the Focus Ring to focus the projector image.
Rotate the Focus Ring until the image is clear. 
						

							13
Multimedia  LCD  Projector
E
ng
l
is
h3. Front IR  receiver
When using the remote control,point the remote control at this sensor..
4.Filter cover
Prevents dust and other foreign particles from being drawn into projector.
Remove the Filter cover to clean the air filter.
5.Front / Rear adjustable foot
Extend and retract to adjust the projection angle
6.Foot adjuster button
Lock/unlock the adjustable foot.
7.Lens cover
Attach when not using to protect the lens from becoming dirty or damaged
8.Control panel ( key pads )
Operating system. 
						

							14
Multimedia  LCD  Projector
En
g
l
i
s
h
Enter
8. Power indicator9. Lamp indicator
1.Power7. Keystone
3. Blank
2.Input source4. Auto
5. MenuESC 6. Menu-left/right, Menu- up/down
1.Power button
   Power on / operation mode, Standby mode, Cooling-down mode
2. INPUT Computer source
   Selects between RGB input source-
   Computer 1 
 → Computer 2/RGB or
   Computer 2/YPbPr
 →DV I →AV
 
 →S-Video →Component Video (YcbCr)
3. Blank
    Blanks the projected image. If the projector is left in blank mode
    for more than 15 minutes, the projector will automatically shut
    down.
Keypad control 
						

							15
Multimedia  LCD  Projector
E
ng
l
is
h4. Auto
    Automatically adjusts the setting to match the current input.
5. Menu
    Display or hides the OSD main menu page.
6.Menu-up /down,Menu-right / left
   Selecting OSD menu item up or down /
   Selecting and adjusting the function of OSD menu item
7. Keystone
   Adjusts the vertical keystone with menu-right, menu-left
8.Power indicator
   Lights on or flashes to indicate the operating status of the
    projector(See Page 56 )
9. Lamp indicator
    Indicate a problem in the internal projector temperature, lamp
    cover or cooling down.(See Page 56)
10.ESC
     Enters into last status at OSD Menu or hides the OSD Menu 
						

							16
Multimedia  LCD  Projector
En
g
l
i
s
h
Rear View / IO Board
1. Computer1/ DVI connector
    Input Analog / Digital RGB video signal from a computer
2. Computer2 / Y Pb Pr (Component video) connector
    Analog RGB video signal from a computer or
    Component Video (Y,Pb,Pr) signal form the video source .
3. Monitor out connector
    Connect an external monitor to this connection view the
   computer 2 input.
Control(RS-232C)Monitor OutC om puter 2/Y P bP rCom puter 1/D V I
Y          Cb          Cr Video       L            RS-V ideoMouseUSB  Audio
 In
6.Component connector     7. Video/Audio    12.Rear IR receiver
Security lock
Inlet Ventilation
8.Audio in9.USB mouse connector 10. Power socket
11. Power switch
5.S-Video 
						

							17
Multimedia  LCD  Projector
Eng
li s
h
4.  Control (RS-232C)
    Serial data port for controlling the projector with a computer
    or other  RS-232 control device.
5.  S-Video connector
    S-Video signal from a video source.
6.  Component Video connector ( Y,Cb,Cr)
    Component video (Y,Cb,Cr) signal from a video source.
7.  Audio out connector
    Connecting to an external speaker system.
8.  Audio  in1/DVI
    Stereo mini jack for PC input
9.  USB mouse connector
    Connects a USB mouse cable to a computer to control
    computer mouse functions.
10.  Power  socket
      Connects the power core to this connection.
11.  Power switch
      Turns the power on/off.
12.  Rear IR receiver
      When using the remote control, point the remote control
      at this sensor. 
						

							18
Multimedia  LCD  Projector
En
glis
h
Bottom View
1.  Suspension bracket fixing points(3 points)
    Install the optional ceiling mount here when suspending
   the projector from the ceiling.
2.  Air filter cover
    Prevents dust and other foregin particles from being drawn
    into the projector.
3. Remote control
   Replace the remote control at the button of the projector.
   
K
ey s
t o n
e 
S t
il lI N P
U T 
B l
a n k-+
Front adjustable foot
Name card
3.Remote controller EMI Label
2.Air filter cover
1.Suspension bracket fixing points (3)
Front adjustable foot 
						

							19
Multimedia  LCD  Projector
Eng
li s
h
Remote Control (Ty pe 1)
1.          Power
Power on / operation
mode, Standby mode,
Cooling-down mode
2.           Esc
Enters into last
status at OSD menu
or hides the OSD menu.
3.          Volume up/
            down
 Sound louder or lower
4.           Menu
 Display  or  hide  the
OSD main menu page.
5 .          Keystone
 Adjusts the horizontal and vertical keystone function
6.            Still
   Keep the current image on the screen.
7.           Blank
    Hide the current image, Become black screen 8.          
Auto
  Refresh the current image.
9.          Menu down/Menu up,
            Menu left/ Menu right
            Selecting and adjusting
            the function of OSD
           menu item
10.          INPUT source
   Select input source:
   
Computer 1 →Computer 2/RGB
   ， Computer 2/YPbPr → DVI →
   Composite Video →S- Video  →
   Component Video (YCbCr) 。
 S till
 Blank
IN P U T
 Ke ystone
Still
INPUT
Blank
-+ 
						

							20
Multimedia  LCD  Projector
En
g
l
i
s
h
Remote Control Batteries Installation
1.  Remove the battery cover.
2.  Loading the batteries.
     Make sure the plus and minus poles
     are correctly oriented.
3.  Close the battery cover.
        Caution
   Avoid excessive heat and humidity.
• Do not drop the remote control.
• Do not expose the remote control to water or moisture, this could result in malfunction.
• When the remote control will not be used for an extened period, remove the batteries.
• Replace the batteries when remote control  operation becomes sluggish or unresponsive.
• Do not place the remote control close to the  cooling fan of the projector.
• Do not disassemble the remote control. If the remote control needs service.
  Please bring it to the service station.•