Boxlight Cp-15t Users Guide

							31
VIDEO MODE
Press the MENU button and the ON-SCREEN MENU will appear.
Press the POINT LEFT/RIGHT buttons to select Video  and press
the SELECT button.  
SELECTING VIDEO MODE
Direct Operation
Press the MODE button on the Top Control or the VIDEO button on the
Remote Control Unit. Select the Mode among COMPUTER, VIDEO, or
MCI mode.
Menu Operation
COMPUTER
MCI
VIDEO
MODE button
SELECTING COLOR SYSTEM
Press the MENU button and the ON-SCREEN MENU will appear.
Press the POINT LEFT/RIGHT buttons to select SYSTEM and
press the SELECT button.  Another dialog box VIDEO SYSTEM
Menu will appear.  (The display also appears by pressing the
SYSTEM button on the Top Control or the Remote Control Units.)
Press the POINT DOWN button and a red-arrow icon will appear.
Move the arrow to Auto, and then press the 
SELECT button.  
1
2
The projector automatically detects the incoming Video system, and
adjusts itself to optimize its performance.
When the Video System is PAL-M select the system manually.
Auto
If the projector cannot reproduce the proper video image, it is
necessary to select a specific broadcast signal format among PAL,
SECAM, NTSC, NTSC 4.43, or PAL-M.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M 
This box indicates
the system being
selected. 
						

							32
VIDEO MODE
PICTURE IMAGE ADJUSTMENT
Press the MENU button and the ON-SCREEN MENU will appear.
Press the POINT LEFT/RIGHT buttons to select IMAGE  and
press the SELECT button.  Another dialog box PICTURE IMAGE
ADJUSTMENT Menu will appear. 
Press the POINT DOWN button and a red-arrow icon will appear.
Move the arrow to sor tof the item that you want to change by
pressing the POINT UP/DOWN buttons.  To increase the value,
point the arrow to sand then press the SELECT button.  To
decrease the value point the arrow to tand then press the
SELECT button. 
1
2
Adjusting the Picture Image
The normal picture level is preset on this projector by the factory and
can be restored anytime by pressing the NORMAL button (located on
the Top Control or on the Remote Control).  The Normal display will
be displayed on the screen for a few seconds. 
Normal Function
Normal
It closes the PICTURE
IMAGE ADJUSTMENT
Menu.Move the arrow to
sor tand press
the SELECT 
button. It indicates roughly
the level of the
item.
ColorPoint  to tto lighten the image, and select sto deepen
the image.  (From 0 to 63.)
TintPoint  to tto adjust the color more purple, and select s
to adjust more green.  (From 0 to 63.)
ContrastPoint  to tto lighten the image, and select sto deepen
the image.  (From 0 to 63.)
BrightnessPoint  to tto darken the image, and select sto
brighten the image.  (From 0 to 63.)
Recalls the data previously adjusted.Reset
Stores the data in the memory.Stored
Closes the PICTURE IMAGE ADJUSTMENT  Menu.Quit
sharpnessPoint  to tto soften the image, and select sto make
the image sharper.  (From 0 to 63.)
PICTURE SCREEN ADJUSTMENT
This projector has a picture screen resize function, which enables you to display the image in desirable size.
Press the MENU button and the ON-SCREEN MENU will appear.
Press the POINT LEFT/RIGHT buttons to select SCREEN 
and press the SELECT button.  Another dialog box PICTURE
SCREEN ADJUSTMENT DISPLAY will appear. 
Press the POINT DOWN button and a red-arrow icon will appear.
Move the arrow to the screen size that you want to set, and then
press the 
SELECT button.  
1
2
RegularNormal Video Image size with 4 
x 3 aspect ratio.
WideCompresses the image vertically to Wider Video Image
size with 16 
x9 aspect ratio.
Move the pointer to the
item that you want to
select, and then press
the SELECT button.
Each of the keys operates as follow. 
						

							33
MCI MODE
OPERATING THE PC CARD SLOT
This projector has a PC CARD SLOT on its side. Pictures in a memory card (SmartMedia with PC Card Adapter
or PC card) can be displayed just by inserting the card into PC CARD SLOT. It is unnecessary to connect with
other input equipment. Media Card Imager (supplied with CD-ROM) can edit the image data and record it into a
memory card for projecting with the projector.
Available Data
This projector can project the image data as follows through the PC CARD SLOT.
lThe data edited by “Media Card Imager.”
lThe data of the resolution between VGA (640 X 480) and SXGA (1280 X 1024) in Bit Map type (BMP) or JPEG type
(JPG), such as Digital Camera data, can be also displayed. 
(Some image data in SXGA size may not be displayed properly.  In that case, set the resolution lower.)
Refer to “SHOW THE DATA IN THE MEMORY CARD” on page 34 to display the image data.
Available Card
SmartMedia (with PC Card Adapter) or Type || PCMCIA-ATA Card can be used with this projector.  Refer to
SMARTMEDIA AND PC CARD ADAPTER on pages 38 and 39 for operation.
NOTE : Some PCMCIA Adapter or PC Card are not compatible with for this projector and cannot provide the image data.
In that case, use our SmartMedia and PC Card Adapter.
How to Load a PC Card Into the Projector
LOAD
Insert PC Card Adapter (with SmartMedia) or PC card into PC
CARD SLOT. Make sure EJECT button pops out.
NOTE : Do not insert the card in the reverse. The card can be
damaged.
UNLOAD
Press EJECT button, and the memory card pops out.
NOTE : Do not take the card out while the PC CARD SLOT
loading. Data and the card can be damaged.
Media Card Imager
Media Card Imager (CD-ROM) is attached to this projector
to edit the image data for projecting. Installation of Media
Card Imager is recommended.  Refer to Owner’s Manual of
Media Card Imager for installation and operation.PC CARD INDICATORDO NOT REMOVE THE
MEMORY CARD WHILE THIS
INDICATOR IS LIT. THE DATA
IN THE MEMORY CARD CAN
BE DAMAGED.
PC CARD SLOT
EJECT BUTTONPC Card or PC Card Adapter
(with SmartMedia) 
FRONT SIDE UP PC CARD SLOT PC with Windows 95
Media Card Imager
(CD-ROM)
Digital Camera
SmartMedia (with Adapter) PC Card or
SmartMedia
(with Adapter) 
						

							34
MCI MODE
SHOW THE DATA IN THE MEMORY CARD
Display Data on Screen
lThis projector can project only the image data edited with Media Card Imager or the data in Bit Map type or in JPEG
type through the PC CARD SLOT. Other data is not compatible and should be edited and written in a memory card
with Media Card Imager before loading PC CARD SLOT. 
(The data in Bit Map type or in JPEG type, such as the data captured with a digital camera, can be projected directly
through PC CARD SLOT.)
lIf there exists the data edited with Media Card Imager and other data (such as in Bit Map type or JPEG type) together
in a memory card, the data edited by Media Card Imager has priority to be projected with the LCD projector. The other
image data in Bit Map type or JPEG type is not projected. In that case, edit those data and record in the memory card
with Media Card Imager.
Index and Page
The data edited with Media Card Imager is organized into an Index consisting of several Pages. To project the Page,
select the Index and then select the Page in the Index.
Index Selection
Page Selection
Pages in the Index IndexSelect the Index
Move the arrow tosor tand press
the SELECT 
button.
1
2
Press the MENU button and the ON-SCREEN MENU will appear.
Press the POINT LEFT/RIGHT buttons to select VIEW and press
the SELECT button.  Another dialog box VIEW SETTING menu
will appear. 
Press the POINT DOWN button and a red-arrow icon will appear.
Move the arrow to Index, and then press the 
SELECT button.
The table of Indexes in the memory card will appear.
3Press POINT UP/DOWN/LEFT/RIGHT buttons to move to the
Index that you want to project and press SELECT button.  The
first Page of the Index selected is displayed.  
Press SELECT button again to display the table of Pages.
1
2
Press the MENU button and the ON-SCREEN MENU will appear.
Press the POINT LEFT/RIGHT buttons to select VIEW and press
the SELECT button.  Another dialog box VIEW SETTING menu
will appear. 
Press the POINT DOWN button and a red-arrow icon will appear.
Move the arrow to Page, and then press the 
SELECT button.
The table of pages of the index card will appear.
3Press POINT UP/DOWN/LEFT/RIGHT buttons to move to the
Page that you want to project and press SELECT button.  The
page selected is displayed on the screen.
The table of Pages can be displayed by pressing SELECT button
when the page is displayed on full screen.
1
2
When the memory card is inserted into the PC CARD SLOT, mode is automatically set to MCI mode and the first
Page of the latest Index  is projected on the screen. (To turn Video/Computer mode to MCI mode manually, press the
MODE button on the Top Control or the COMPUTER / MCI button on the Remote Control, or select MCI mode in the
ON-SCREEN MENU referring the page 25.)
To change the page, press PAGE ( ) or  ( ) buttons.  To select described Index or Page in the table, follow the
instructions of INDEX SELECTION and PAGE SELECTION. 
						

							35
MCI MODE
PICTURE IMAGE ADJUSTMENT
Press the MENU button and the ON-SCREEN MENU will appear.
Press the POINT LEFT/RIGHT buttons to select IMAGE  and
press the SELECT button.  Another dialog box PICTURE IMAGE
ADJUSTMENT Menu will appear. 
Press the POINT DOWN button and a red-arrow icon will appear.
Move the arrow to 
sor tof the item that you want to change by
pressing the POINT UP/DOWN buttons.  To increase the value,
point the arrow to 
sand then press the SELECT button.  To
decrease the value, point the arrow to 
tand then press the
SELECT button. 
1
2
Adjust Picture Image Manually
Fine sync
Adjust the picture as necessary to eliminate flicker from the display.
(From 0 to 127.)  This item can be adjusted by pressing the FINE
SYNC. button on the Top Control or the Remote Control Unit.
Total dots
The number of the total dots in one horizontal period.  Adjust the
number to match your PC image.
Contrast
Point  to tto make the image lighter, and select sto make the image
darker.  (From 0 to 63.)
Brightness
Point  to tto darken the image, and select sto brighten the image.
(From 0 to 63.)
It closes the PICTURE
IMAGE ADJUSTMENT
Menu.Move the arrow to
sor t and press
the SELECT 
button.It indicates roughly
the level of the
item.
Recalls the data previously adjusted.Reset
Stores the adjusted data in the memory.Stored
Closes the PICTURE IMAGE ADJUSTMENT  Menu.Quit
White Balance (Red / Green / Blue)
Point  to tto lighten the color of image, and select sto darken the the
color of the image deeper.  (From 0 to 63.)
The normal picture level is preset on this projector by the factory and
can be restored anytime by pressing the NORMAL button (located on
the Top Control or on the Remote Control Units).  The Normal display
will be displayed on the screen for a few seconds. 
Normal Function
Normal
Each of the keys operates as follow. 
						

							36
MCI MODE
PICTURE POSITION ADJUSTMENT
The position of the image can be adjusted vertically and horizontally through PICTURE POSITION
ADJUSTMENT.
Press the MENU button and the ON-SCREEN MENU will appear.
Press the POINT LEFT/RIGHT buttons to select POSITION 
and press the SELECT button.  Another dialog box PICTURE
POSITION Menu will appear. 
Select the arrow to the direction (described as  ,  ,  or  )
that you want to adjust by pressing the POINT UP/DOWN buttons,
and then press the SELECT button.
1
2
PICTURE SCREEN ADJUSTMENT
This projector has a picture screen resize function, which enables you to display the image in desirable size.
Press the MENU button and the ON-SCREEN MENU will appear.
Press the POINT LEFT/RIGHT buttons to select SCREEN 
and press the SELECT button.  Another dialog box PICTURE
SCREEN Menu will appear.1
Select the arrow to the
direction (described as
, ,  or ),and
then press the SELECT
button.
Recalls the setting data previously set.Reset
Stores the setting data in the memory.Stored
Closes the PICTURE POSITION Menu.Quit
To adjust the image size or pan the image, move the arrow to
Digital zoom by pressing POINT UP/DOWN buttons and then
press SELECT button.  The ON-SCREEN menu and SCREEN
ADJUST menu will disappear.  The magnifying-glass icon and the
message “D. Zoom” is displayed to indicate Digital Zoom mode.2
Expand function
To expand the image size, press SELECT button.  The image is magnified by degrees. The maximum size of the
projected image in expand mode is 4 times as large as the screen size (1024 x 768).
Compress function
To compress the image size, press FRONT CLICK button.  The size of image is reduced by degrees.  The minimum
size of the projected image in compress mode is 640 x 480 in VGA, 800 x 600 in SVGA, or 1024 x 768 in XGA /
SXGA. 
Panning function
To pan the image, press POINT UP/DOWN/LEFT/RIGHT buttons.  Panning function can work only when the image is
larger than the screen size.
To cancel Digital Zoom mode, press any other button except the
SELECT / FRONT CLICK / POINT / LASER / CURSOR buttons.
To adjust the image to the screen size (1024 x 768), press
NORMAL button.3
To return the image to the screen size, select True in the dialog
box.  4
Move the arrow to
“Digital zoom” or “True”
and then press the
SELECT button.
lThis projector cannot display in a resolution more than 1280 X 1024.  If your computer’s screen resolution is higher than
1280 X 1024, set the resolution lower before connecting the projector.
lThe image data in other than XGA (1024 x 768) is modified to fit the screen size in the initial mode.
Each of the keys operates as follow. 
						

							37
MCI MODE
WRITE DATA INTO MEMORY CARD
Access to the Card with the Projector
If your computer doesnt have the PC card write equipment, the data can be written or read by connecting
with this projector.
NOTE : This operation can be made only by Media Card Imager in PC.
The data edited by Media Card Imager in the computer can be written in or read from the memory card with the
PC or this projector.
The data edited by Media Card Imager is written in Bit Map type (BMP) or JPEG type (JPG).
NOTE : Connect the projector to the computer with MCI Cable before
turning those appliances on.
Do not press any button while read/write the data through MCI
Cable. Those operations are canceled and the data in the
memory card may be damaged.
Move the arrow tosor tand press
the SELECT 
button.
Connect the computer and the projector with MCI cable
(supplied) (refer to page 12, 13).
Connect the projector with your computer by the MCI cable
(supplied).  (Refer to “CONNECTING COMPUTER” on Page 12.)
Insert the memory card into PC CARD SLOT of the projector.
And then, turn on the projector and the computer.1
2Press the MENU button and the ON-SCREEN MENU will appear.
Press the POINT LEFT/RIGHT buttons to select View and press
the SELECT button.  Another dialog box VIEW SETTING Menu
will appear. 
3Press POINT DOWN button and a red arrow appear.  Move the
arrow to Card access by pressing POINT UP/DOWN button.  And
then press SELECT button.  “Ready to access” is displayed.  
Operate Media Card Imager of PC to write/read the data in the PC
card.  (Refer to Owners Manual of Media Card Imager for
operation.) 
						

							38
MCI MODE
SMARTMEDIA AND PC CARD ADAPTER
SmartMedia and PC Card Adapter are provided with this LCD projector. SmartMedia can be used as a PC card
conforming to the PC Card Standard-ATA by combining with PC Card Adapter.
Install / Remove the SmartMedia
INSTALL
Insert SmartMedia fully into PC Card Adapter. Make sure EJECT
button pops out.
NOTE
lThe front side of SmartMedia has Contact Area on its surface.
The front side of PC Card Adapter has Eject button on the left
side of the slot.
lDo not insert SmartMedia in the reverse. The card and the
data can be damaged.
REMOVE
To remove SmartMedia, fully press in the EJECT button.
The card pops out, then take out the card.
NOTE
lDo not pull SmartMedia by force. It may damage SmartMedia
or PC Card Adapter.
PC Card Adapter
(supplied)
SmartMedia
(supplied)
EJECT button
¬Contact Area
Data is written in Contact Area. Never
scratch or stain this area.
ÁWrite Protect Area
Affix Write Protect Sticker onto Write
Protect Area to prevent from accidental
erasure.
ÂIndex Area
Affix Index Label onto Index Area.
CAUTION
Write Protect Sticker is not available for PC.  When PC attempts  to read the data from SmartMedia with Write
Protect Sticker, it provides error messages or the control of PC becomes insecure because of the property of the
interface. When the error messages are displayed, press any key to return to the normal display. It is
recommended, therefore that the SmartMedia should be used on PC without Write Protect Sticker.
IMPORTANT NOTE
THE DATA STORED ON THE MEMORY CARD (SMARTMEDIA OR PC CARD) MAY BE DAMAGED OR
LOST BECAUSE OF THE DAMAGE OF THE MEMORY CARD OR THE ACCIDENTAL ERASURE. IT IS
RECOMMENDED THAT ANY IMPORTANT DATA SHOULD BE COPIED ONTO SEPARATE MEDIA,
SUCH AS A FLOPPY DISK, A HARD DISK, OR A MO DISK. WE SHALL NOT BE LIABLE FOR ANY
DAMAGE OR LOSS OF PROFITS ARISING FROM THE LOSS OF DATA BECAUSE OF THE
ACCIDENTAL OPERATION AND THE DAMAGE OF A MEMORY CARD OR APPLIANCES. REFER TO
OWNER’S MANUAL OF MEDIA CARD IMAGER FOR OPERATING THE SOFTWARE. 
						

							39
MCI MODE
SmartMedia
lSmartMedia is a precision device. Do not bend it,
drop it, subject it to strong forces or shocks or
place where strong static electrical charge can be
generated.
lDo not touch the surface of the Contact Area with
fingers or allow it to be stained with foreign mate-
rials. Store SmartMedia inside its protective case
when it is not used.
lSmartMedia is a consumable item. The data may
not be written in or read from SmartMedia by
using for a long time. In that case, replace
SmartMedia with new one.
Memory capacity : 8MB
Operating voltage : 3.3 V DC
Usage environment
Temperature : 0~55 °C (during use)
-20~65 °C (during storage)
Humidity : less than 95% 
(during use, during storage)PC Card Adapter
lDo not bend it, drop it, subject it to strong forces or
shocks or place where strong static electrical charge
can be generated.
lDo not insert materials other than SmartMedia. The
adapter may be damaged. Store PC Card Adapter
inside its protective case when it is not used.
lDo not shake the adapter, turn off the appliances, or
remove SmartMedia from the PC Card Adapter dur-
ing writing or reading data. It may damage the data in
SmartMedia.
Operating voltage : 5 V DC
Usage environment
Temperature : 0~55 °C (during use)
-20~65 °C (during storage)
Humidity : less than 95% 
(during use, during storage)
This adapter can be adapted to only our
SmartMedia indicated below.
Available SmartMedia 
: 3.3V / 5V,  2MB / 4MB / 8MB /16MB
Precautions and Specifications of the appliance. 
						

							40
SETTING
SETTING MENU
Press the MENU button and the ON-SCREEN MENU will appear.
Press the POINT LEFT/RIGHT buttons to select SETTING
and press the SELECT button.  Another dialog box
SETTING Menu will appear. 
Press the POINT DOWN button and a red-arrow icon will appear.
Move the arrow to the item that you want to set, and then press
the 
SELECT button to set it On or Off.  
1
2
Blue backWhen this function is in the On position, this projector
will produce a blue image without video noise on the
screen when the video source is unplugged or turned off.
DisplayWhen this function is in the On position, the On-Screen
Displays always appear when adjustments are made.
(The following displays disappear by switching this
function Off.)
l
Preparation Display 
(The Number-counting down Display)
lMode Display
lVolume Display
lMute Display
lNormal Display
The Lamp age function is designed to reset the lamp
replacement monitor timer.  When replacing the lamp,
reset the lamp replacement monitor timer by using this
function.  (Refer to page 43.)Lamp age
SETTING LANGUAGE
Press the MENU button and the ON-SCREEN MENU will appear.
Press POINT LEFT/RIGHT buttons to select LANGUAGE  and
press the SELECT button.  Another dialog box LANGUAGE Menu
will appear. 
Press the POINT DOWN button and a red-arrow icon will appear.
Move the arrow to the language that you want to set, and then
press the 
SELECT button.
1
2
The language used in the ON-SCREEN MENU is selectable
from among English, German, French, Italian, Spanish and
Japanese.
Set the Pointer
to the item, and
then press the
SELECT button.
Move the Pointer to the
language that you want
to set, and then press
the SELECT button.
CeilingWhen this function is in the “On” position, the top / bottom
and the left / right reversed picture is provided to project
the image from a ceiling mounted projector.
RearWhen this function is in the “On” position, the left / right
reversed picture is provided to project the image to a rear
projection screen.
Split wipeWhen this function is in the “On” position, the picture will
change to the next one by sliding black image side ways
like drawing black curtains.  This occurs when switching
from one input source to another.
TB
TB
LRLR